+// SPDX-License-Identifier: GPL-2.0
/*
* Freescale i.MX6 PCI Express Root-Complex driver
*
* Based on upstream Linux kernel driver:
* pci-imx6.c: Sean Cross <xobs@kosagi.com>
* pcie-designware.c: Jingoo Han <jg1.han@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
__weak int imx6_pcie_toggle_power(void)
{
#ifdef CONFIG_PCIE_IMX_POWER_GPIO
+ gpio_request(CONFIG_PCIE_IMX_POWER_GPIO, "pcie_power");
gpio_direction_output(CONFIG_PCIE_IMX_POWER_GPIO, 0);
mdelay(20);
gpio_set_value(CONFIG_PCIE_IMX_POWER_GPIO, 1);
mdelay(20);
+ gpio_free(CONFIG_PCIE_IMX_POWER_GPIO);
#endif
return 0;
}
* state due to being previously used in U-Boot.
*/
#ifdef CONFIG_PCIE_IMX_PERST_GPIO
+ gpio_request(CONFIG_PCIE_IMX_PERST_GPIO, "pcie_reset");
gpio_direction_output(CONFIG_PCIE_IMX_PERST_GPIO, 0);
mdelay(20);
gpio_set_value(CONFIG_PCIE_IMX_PERST_GPIO, 1);
mdelay(20);
+ gpio_free(CONFIG_PCIE_IMX_PERST_GPIO);
#else
puts("WARNING: Make sure the PCIe #PERST line is connected!\n");
#endif
imx_pcie_regions_setup();
+ /*
+ * By default, the subordinate is set equally to the secondary
+ * bus (0x01) when the RC boots.
+ * This means that theoretically, only bus 1 is reachable from the RC.
+ * Force the PCIe RC subordinate to 0xff, otherwise no downstream
+ * devices will be detected if the enumeration is applied strictly.
+ */
+ tmp = readl(MX6_DBI_ADDR + 0x18);
+ tmp |= (0xff << 16);
+ writel(tmp, MX6_DBI_ADDR + 0x18);
+
/*
* FIXME: Force the PCIe RC to Gen1 operation
* The RC must be forced into Gen1 mode before bringing the link