This select a dummy sandbox PHY driver. It used only to implement
the unit tests for the phy framework
+config NOP_PHY
+ bool "NOP PHY driver"
+ depends on PHY
+ help
+ Support for a no-op PHY driver (stubbed PHY driver).
+
+ This is useful when a driver uses the PHY framework but no real PHY
+ hardware exists.
+
+config SPL_NOP_PHY
+ bool "NOP PHY driver in SPL"
+ depends on SPL_PHY
+ help
+ Support for a no-op PHY driver (stubbed PHY driver) in the SPL.
+
+ This is useful when a driver uses the PHY framework but no real PHY
+ hardware exists.
+
+config BCM6318_USBH_PHY
+ bool "BCM6318 USBH PHY support"
+ depends on PHY && ARCH_BMIPS
+ select POWER_DOMAIN
+ help
+ Support for the Broadcom MIPS BCM6318 USBH PHY.
+
+config BCM6348_USBH_PHY
+ bool "BCM6348 USBH PHY support"
+ depends on PHY && ARCH_BMIPS
+ help
+ Support for the Broadcom MIPS BCM6348 USBH PHY.
+
+config BCM6358_USBH_PHY
+ bool "BCM6358 USBH PHY support"
+ depends on PHY && ARCH_BMIPS
+ help
+ Support for the Broadcom MIPS BCM6358 USBH PHY.
+
+config BCM6368_USBH_PHY
+ bool "BCM6368 USBH PHY support"
+ depends on PHY && ARCH_BMIPS
+ help
+ Support for the Broadcom MIPS BCM6368 USBH PHY.
+
+config PIPE3_PHY
+ bool "Support omap's PIPE3 PHY"
+ depends on PHY && ARCH_OMAP2PLUS
+ help
+ Support for the omap PIPE3 phy for sata
+
+ This PHY is found on omap devices supporting SATA such as dra7, am57x
+ and omap5
+
+config SPL_PIPE3_PHY
+ bool "Support omap's PIPE3 PHY in SPL"
+ depends on SPL_PHY && ARCH_OMAP2PLUS
+ help
+ Support for the omap PIPE3 phy for sata in SPL
+
+ This PHY is found on omap devices supporting SATA such as dra7, am57x
+ and omap5
+
+config STI_USB_PHY
+ bool "STMicroelectronics USB2 picoPHY driver for STiH407 family"
+ depends on PHY && ARCH_STI
+ help
+ This is the generic phy driver for the picoPHY ports
+ used by USB2 and USB3 Host controllers available on
+ STiH407 SoC families.
+
+config PHY_STM32_USBPHYC
+ tristate "STMicroelectronics STM32 SoC USB HS PHY driver"
+ depends on PHY && ARCH_STM32MP
+ help
+ Enable this to support the High-Speed USB transceiver that is part of
+ STMicroelectronics STM32 SoCs.
+
+ This driver controls the entire USB PHY block: the USB PHY controller
+ (USBPHYC) and the two 8-bit wide UTMI+ interface. First interface is
+ used by an HS USB Host controller, and the second one is shared
+ between an HS USB OTG controller and an HS USB Host controller,
+ selected by an USB switch.
+
+config MESON_GXL_USB_PHY
+ bool "Amlogic Meson GXL USB PHYs"
+ depends on PHY && ARCH_MESON && MESON_GXL
+ imply REGMAP
+ help
+ This is the generic phy driver for the Amlogic Meson GXL
+ USB2 and USB3 PHYS.
+
endmenu