usb: ums: fix disk capacity miscalculation and code cleanup

[u-boot] / drivers / rtc / ds1306.c

diff --git a/drivers/rtc/ds1306.c b/drivers/rtc/ds1306.c
index 03c4089267e1923522308a77ff6c7a027e53363b..1ec1837cb4e1e79405d6ba7357d8fc0b51f307f0 100644 (file)
--- a/drivers/rtc/ds1306.c
+++ b/drivers/rtc/ds1306.c
@@ -4,23 +4,7 @@
  * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
  * Stephan Linz <linz@li-pro.net>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -62,9 +46,6 @@
 
 #define        RTC_USER_RAM_BASE       0x20
 
-static unsigned int bin2bcd (unsigned int n);
-static unsigned char bcd2bin (unsigned char c);
-
 /* ************************************************************************* */
 #ifdef CONFIG_SXNI855T         /* !!! SHOULD BE CHANGED TO NEW CODE !!! */
 
@@ -86,7 +67,7 @@ static void init_spi (void);
 /* read clock time from DS1306 and return it in *tmp */
 int rtc_get (struct rtc_time *tmp)
 {
-       volatile immap_t *immap = (immap_t *) CFG_IMMR;
+       volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
        unsigned char spi_byte; /* Data Byte */
 
        init_spi ();            /* set port B for software SPI */
@@ -143,7 +124,7 @@ int rtc_get (struct rtc_time *tmp)
 /* set clock time in DS1306 RTC and in MPC8xx RTC */
 int rtc_set (struct rtc_time *tmp)
 {
-       volatile immap_t *immap = (immap_t *) CFG_IMMR;
+       volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
        init_spi ();            /* set port B for software SPI */
 
@@ -218,7 +199,7 @@ int rtc_set (struct rtc_time *tmp)
 /* Initialize Port B for software SPI */
 static void init_spi (void)
 {
-       volatile immap_t *immap = (immap_t *) CFG_IMMR;
+       volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
        /* Force output pins to begin at logic 0 */
        immap->im_cpm.cp_pbdat &= ~(PB_SPI_CE | PB_SPIMOSI | PB_SPISCK);
@@ -235,7 +216,7 @@ static void init_spi (void)
 /* NOTE: soft_spi_send() assumes that the I/O lines are configured already */
 static void soft_spi_send (unsigned char n)
 {
-       volatile immap_t *immap = (immap_t *) CFG_IMMR;
+       volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
        unsigned char bitpos;   /* bit position to receive */
        unsigned char i;        /* Loop Control */
 
@@ -264,7 +245,7 @@ static void soft_spi_send (unsigned char n)
 /* NOTE: soft_spi_read() assumes that the I/O lines are configured already */
 static unsigned char soft_spi_read (void)
 {
-       volatile immap_t *immap = (immap_t *) CFG_IMMR;
+       volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
        unsigned char spi_byte = 0;     /* Return value, assume success */
        unsigned char bitpos;   /* bit position to receive */
@@ -314,7 +295,7 @@ int rtc_get (struct rtc_time *tmp)
         * step just once.
         */
        if (!slave) {
-               slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+               slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
                                SPI_MODE_3 | SPI_CS_HIGH);
                if (!slave)
                        return;
@@ -377,7 +358,7 @@ int rtc_set (struct rtc_time *tmp)
 {
        /* Assuming Vcc = 2.0V (lowest speed) */
        if (!slave) {
-               slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+               slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
                                SPI_MODE_3 | SPI_CS_HIGH);
                if (!slave)
                        return;
@@ -408,7 +389,7 @@ void rtc_reset (void)
 {
        /* Assuming Vcc = 2.0V (lowest speed) */
        if (!slave) {
-               slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+               slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
                                SPI_MODE_3 | SPI_CS_HIGH);
                if (!slave)
                        return;
@@ -459,19 +440,4 @@ static void rtc_write (unsigned char reg, unsigned char val)
 
 #endif /* end of code exclusion (see #ifdef CONFIG_SXNI855T above) */
 
-/* ------------------------------------------------------------------------- */
-
-static unsigned char bcd2bin (unsigned char n)
-{
-       return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F));
-}
-
-/* ------------------------------------------------------------------------- */
-
-static unsigned int bin2bcd (unsigned int n)
-{
-       return (((n / 10) << 4) | (n % 10));
-}
-/* ------------------------------------------------------------------------- */
-
 #endif