#define writeByte(ptrReg,value) \
*(volatile unsigned char *)(sed13806.isaBase + ptrReg) = value
+#ifdef CONFIG_TOTAL5200
+#define writeWord(ptrReg,value) \
+ (*(volatile unsigned short *)(sed13806.isaBase + ptrReg) = value)
+#else
#define writeWord(ptrReg,value) \
(*(volatile unsigned short *)(sed13806.isaBase + ptrReg) = ((value >> 8 ) & 0xff) | ((value << 8) & 0xff00))
-
+#endif
GraphicDevice sed13806;
/*-----------------------------------------------------------------------------
- * EpsonSetRegs --
+ * EpsonSetRegs --
*-----------------------------------------------------------------------------
*/
static void EpsonSetRegs (void)
/* the content of the chipset register depends on the board (clocks, ...)*/
const S1D_REGS *preg = board_get_regs ();
while (preg -> Index) {
- writeByte (preg -> Index, preg -> Value);
- preg ++;
+ writeByte (preg -> Index, preg -> Value);
+ preg ++;
}
}
-
+
/*-----------------------------------------------------------------------------
- * video_hw_init --
+ * video_hw_init --
*-----------------------------------------------------------------------------
*/
void *video_hw_init (void)
Retreive base address of the chipset
(see board/RPXClassic/eccx.c) */
if ((sed13806.isaBase = board_video_init ()) == 0) {
- return (NULL);
+ return (NULL);
}
sed13806.frameAdrs = sed13806.isaBase + FRAME_BUFFER_OFFSET;
#if defined(CONFIG_VIDEO_SED13806_8BPP)
sed13806.gdfIndex = GDF__8BIT_INDEX;
sed13806.gdfBytesPP = 1;
-
+
#elif defined(CONFIG_VIDEO_SED13806_16BPP)
sed13806.gdfIndex = GDF_16BIT_565RGB;
sed13806.gdfBytesPP = 2;
i = sed13806.memSize/4;
vm = (unsigned int *)sed13806.frameAdrs;
while(i--)
- *vm++ = 0;
-
-
+ *vm++ = 0;
+
+
return (&sed13806);
}
/*-----------------------------------------------------------------------------
}
/*-----------------------------------------------------------------------------
- * video_hw_bitblt --
+ * video_hw_bitblt --
*-----------------------------------------------------------------------------
*/
void video_hw_bitblt (
dstAddr = (dst_y * stride) + (dst_x * bpp);
Epson_wait_idle ();
-
- writeByte(BLT_ROP,0x0C); // source
- writeByte(BLT_OP,0x02);// move blit in positive direction with ROP
+
+ writeByte(BLT_ROP,0x0C); /* source */
+ writeByte(BLT_OP,0x02);/* move blit in positive direction with ROP */
writeWord(BLT_MEM_OFF0, stride / 2);
if (pGD -> gdfIndex == GDF__8BIT_INDEX) {
- writeByte(BLT_CTRL1,0x00);
+ writeByte(BLT_CTRL1,0x00);
}
else {
- writeByte(BLT_CTRL1,0x01);
+ writeByte(BLT_CTRL1,0x01);
}
writeWord(BLT_WIDTH0,(dim_x - 1));
writeWord(BLT_HEIGHT0,(dim_y - 1));
-
+
/* set up blit registers */
writeByte(BLT_SRC_ADDR0,srcAddr);
- writeByte(BLT_SRC_ADDR1,srcAddr>>8);
- writeByte(BLT_SRC_ADDR2,srcAddr>>16);
-
+ writeByte(BLT_SRC_ADDR1,srcAddr>>8);
+ writeByte(BLT_SRC_ADDR2,srcAddr>>16);
+
writeByte(BLT_DST_ADDR0,dstAddr);
- writeByte(BLT_DST_ADDR1,dstAddr>>8);
- writeByte(BLT_DST_ADDR2,dstAddr>>16);
-
+ writeByte(BLT_DST_ADDR1,dstAddr>>8);
+ writeByte(BLT_DST_ADDR2,dstAddr>>16);
+
/* Engage the blt engine */
/* rectangular region for src and dst */
writeByte(BLT_CTRL0,0x80);
Epson_wait_idle ();
}
/*-----------------------------------------------------------------------------
- * video_hw_rectfill --
+ * video_hw_rectfill --
*-----------------------------------------------------------------------------
*/
void video_hw_rectfill (
/* set up blit registers */
writeByte(BLT_DST_ADDR0,dstAddr);
- writeByte(BLT_DST_ADDR1,dstAddr>>8);
- writeByte(BLT_DST_ADDR2,dstAddr>>16);
+ writeByte(BLT_DST_ADDR1,dstAddr>>8);
+ writeByte(BLT_DST_ADDR2,dstAddr>>16);
writeWord(BLT_WIDTH0,(dim_x - 1));
writeWord(BLT_HEIGHT0,(dim_y - 1));
writeWord(BLT_MEM_OFF0,stride / 2);
if (pGD -> gdfIndex == GDF__8BIT_INDEX) {
- writeByte(BLT_CTRL1,0x00);
+ writeByte(BLT_CTRL1,0x00);
}
else {
- writeByte(BLT_CTRL1,0x01);
+ writeByte(BLT_CTRL1,0x01);
}
-
+
/* Engage the blt engine */
/* rectangular region for src and dst */
writeByte(BLT_CTRL0,0x80);
}
/*-----------------------------------------------------------------------------
- * video_set_lut --
+ * video_set_lut --
*-----------------------------------------------------------------------------
*/
void video_set_lut (
}
#ifdef CONFIG_VIDEO_HW_CURSOR
/*-----------------------------------------------------------------------------
- * video_set_hw_cursor --
+ * video_set_hw_cursor --
*-----------------------------------------------------------------------------
*/
void video_set_hw_cursor (int x, int y)
}
/*-----------------------------------------------------------------------------
- * video_init_hw_cursor --
+ * video_init_hw_cursor --
*-----------------------------------------------------------------------------
*/
void video_init_hw_cursor (int font_width, int font_height)
volatile unsigned char *ptr;
unsigned char pattern;
int i;
-
+
/* Init cursor content
Cursor size is 64x64 pixels
Start of the cursor memory depends on panel type (dual panel ...) */
if ((i = readByte (LCD_CURSOR_START)) == 0) {
- ptr = (unsigned char *)(sed13806.frameAdrs + DEFAULT_VIDEO_MEMORY_SIZE - HWCURSORSIZE);
+ ptr = (unsigned char *)(sed13806.frameAdrs + DEFAULT_VIDEO_MEMORY_SIZE - HWCURSORSIZE);
}
else {
- ptr = (unsigned char *)(sed13806.frameAdrs + DEFAULT_VIDEO_MEMORY_SIZE - (i * 8192));
+ ptr = (unsigned char *)(sed13806.frameAdrs + DEFAULT_VIDEO_MEMORY_SIZE - (i * 8192));
}
/* Fill the first line and the first empty line after cursor */
for (i = 0, pattern = 0; i < 64; i++) {
- if (i < font_width) {
- /* Invert background */
- pattern |= 0x3;
-
- }
- else {
- /* Background */
- pattern |= 0x2;
- }
- if ((i & 3) == 3) {
- *ptr = pattern;
- *(ptr + font_height * 16) = 0xaa;
- ptr ++;
- pattern = 0;
- }
- pattern <<= 2;
+ if (i < font_width) {
+ /* Invert background */
+ pattern |= 0x3;
+
+ }
+ else {
+ /* Background */
+ pattern |= 0x2;
+ }
+ if ((i & 3) == 3) {
+ *ptr = pattern;
+ *(ptr + font_height * 16) = 0xaa;
+ ptr ++;
+ pattern = 0;
+ }
+ pattern <<= 2;
}
/* Duplicate this line */
for (i = 1; i < font_height; i++) {
- memcpy ((void *)ptr, (void *)(ptr - 16), 16);
- ptr += 16;
+ memcpy ((void *)ptr, (void *)(ptr - 16), 16);
+ ptr += 16;
}
-
+
for (; i < 64; i++) {
- memcpy ((void *)(ptr + 16), (void *)ptr, 16);
- ptr += 16;
+ memcpy ((void *)(ptr + 16), (void *)ptr, 16);
+ ptr += 16;
}
/* Select cursor mode */
projects / u-boot / blobdiff