+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2004-2006 Atmel Corporation
*
* Modified to support C structur SoC access by
* Andreas Bießmann <biessmann@corscience.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <errno.h>
#include <watchdog.h>
#include <serial.h>
+#include <debug_uart.h>
#include <linux/compiler.h>
#include <asm/io.h>
+#ifdef CONFIG_DM_SERIAL
+#include <asm/arch/atmel_serial.h>
+#endif
#include <asm/arch/clk.h>
#include <asm/arch/hardware.h>
DECLARE_GLOBAL_DATA_PTR;
-static void atmel_serial_setbrg(void)
+#ifndef CONFIG_DM_SERIAL
+static void atmel_serial_setbrg_internal(atmel_usart3_t *usart, int id,
+ int baudrate)
{
- atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
unsigned long divisor;
unsigned long usart_hz;
* Baud Rate = --------------
* 16 * CD
*/
- usart_hz = get_usart_clk_rate(CONFIG_USART_ID);
- divisor = (usart_hz / 16 + gd->baudrate / 2) / gd->baudrate;
+ usart_hz = get_usart_clk_rate(id);
+ divisor = (usart_hz / 16 + baudrate / 2) / baudrate;
writel(USART3_BF(CD, divisor), &usart->brgr);
}
-static int atmel_serial_init(void)
+static void atmel_serial_init_internal(atmel_usart3_t *usart)
{
- atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
-
/*
* Just in case: drain transmitter register
* 1000us is enough for baudrate >= 9600
__udelay(1000);
writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr);
+}
- serial_setbrg();
-
+static void atmel_serial_activate(atmel_usart3_t *usart)
+{
writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
| USART3_BF(USCLKS, USART3_USCLKS_MCK)
| USART3_BF(CHRL, USART3_CHRL_8)
writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr);
/* 100us is enough for the new settings to be settled */
__udelay(100);
+}
+
+static void atmel_serial_setbrg(void)
+{
+ atmel_serial_setbrg_internal((atmel_usart3_t *)CONFIG_USART_BASE,
+ CONFIG_USART_ID, gd->baudrate);
+}
+
+static int atmel_serial_init(void)
+{
+ atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
+
+ atmel_serial_init_internal(usart);
+ serial_setbrg();
+ atmel_serial_activate(usart);
return 0;
}
{
return &atmel_serial_drv;
}
+#endif
+
+#ifdef CONFIG_DM_SERIAL
+enum serial_clk_type {
+ CLK_TYPE_NORMAL = 0,
+ CLK_TYPE_DBGU,
+};
+
+struct atmel_serial_priv {
+ atmel_usart3_t *usart;
+ ulong usart_clk_rate;
+};
+
+static void _atmel_serial_set_brg(atmel_usart3_t *usart,
+ ulong usart_clk_rate, int baudrate)
+{
+ unsigned long divisor;
+
+ divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate;
+ writel(USART3_BF(CD, divisor), &usart->brgr);
+}
+
+void _atmel_serial_init(atmel_usart3_t *usart,
+ ulong usart_clk_rate, int baudrate)
+{
+ writel(USART3_BIT(RXDIS) | USART3_BIT(TXDIS), &usart->cr);
+
+ writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL) |
+ USART3_BF(USCLKS, USART3_USCLKS_MCK) |
+ USART3_BF(CHRL, USART3_CHRL_8) |
+ USART3_BF(PAR, USART3_PAR_NONE) |
+ USART3_BF(NBSTOP, USART3_NBSTOP_1)), &usart->mr);
+
+ _atmel_serial_set_brg(usart, usart_clk_rate, baudrate);
+
+ writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr);
+ writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr);
+}
+
+int atmel_serial_setbrg(struct udevice *dev, int baudrate)
+{
+ struct atmel_serial_priv *priv = dev_get_priv(dev);
+
+ _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate);
+
+ return 0;
+}
+
+static int atmel_serial_getc(struct udevice *dev)
+{
+ struct atmel_serial_priv *priv = dev_get_priv(dev);
+
+ if (!(readl(&priv->usart->csr) & USART3_BIT(RXRDY)))
+ return -EAGAIN;
+
+ return readl(&priv->usart->rhr);
+}
+
+static int atmel_serial_putc(struct udevice *dev, const char ch)
+{
+ struct atmel_serial_priv *priv = dev_get_priv(dev);
+
+ if (!(readl(&priv->usart->csr) & USART3_BIT(TXRDY)))
+ return -EAGAIN;
+
+ writel(ch, &priv->usart->thr);
+
+ return 0;
+}
+
+static int atmel_serial_pending(struct udevice *dev, bool input)
+{
+ struct atmel_serial_priv *priv = dev_get_priv(dev);
+ uint32_t csr = readl(&priv->usart->csr);
+
+ if (input)
+ return csr & USART3_BIT(RXRDY) ? 1 : 0;
+ else
+ return csr & USART3_BIT(TXEMPTY) ? 0 : 1;
+}
+
+static const struct dm_serial_ops atmel_serial_ops = {
+ .putc = atmel_serial_putc,
+ .pending = atmel_serial_pending,
+ .getc = atmel_serial_getc,
+ .setbrg = atmel_serial_setbrg,
+};
+
+static int atmel_serial_enable_clk(struct udevice *dev)
+{
+ struct atmel_serial_priv *priv = dev_get_priv(dev);
+ struct clk clk;
+ ulong clk_rate;
+ int ret;
+
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret)
+ return -EINVAL;
+
+ if (dev_get_driver_data(dev) == CLK_TYPE_NORMAL) {
+ ret = clk_enable(&clk);
+ if (ret)
+ return ret;
+ }
+
+ clk_rate = clk_get_rate(&clk);
+ if (!clk_rate)
+ return -EINVAL;
+
+ priv->usart_clk_rate = clk_rate;
+
+ clk_free(&clk);
+
+ return 0;
+}
+
+static int atmel_serial_probe(struct udevice *dev)
+{
+ struct atmel_serial_platdata *plat = dev->platdata;
+ struct atmel_serial_priv *priv = dev_get_priv(dev);
+ int ret;
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+ fdt_addr_t addr_base;
+
+ addr_base = devfdt_get_addr(dev);
+ if (addr_base == FDT_ADDR_T_NONE)
+ return -ENODEV;
+
+ plat->base_addr = (uint32_t)addr_base;
+#endif
+ priv->usart = (atmel_usart3_t *)plat->base_addr;
+
+ ret = atmel_serial_enable_clk(dev);
+ if (ret)
+ return ret;
+
+ _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate);
+
+ return 0;
+}
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+static const struct udevice_id atmel_serial_ids[] = {
+ {
+ .compatible = "atmel,at91sam9260-dbgu",
+ .data = CLK_TYPE_DBGU,
+ },
+ {
+ .compatible = "atmel,at91sam9260-usart",
+ .data = CLK_TYPE_NORMAL,
+ },
+ { }
+};
+#endif
+
+U_BOOT_DRIVER(serial_atmel) = {
+ .name = "serial_atmel",
+ .id = UCLASS_SERIAL,
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+ .of_match = atmel_serial_ids,
+ .platdata_auto_alloc_size = sizeof(struct atmel_serial_platdata),
+#endif
+ .probe = atmel_serial_probe,
+ .ops = &atmel_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+ .priv_auto_alloc_size = sizeof(struct atmel_serial_priv),
+};
+#endif
+
+#ifdef CONFIG_DEBUG_UART_ATMEL
+static inline void _debug_uart_init(void)
+{
+ atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_DEBUG_UART_BASE;
+
+ _atmel_serial_init(usart, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
+}
+
+static inline void _debug_uart_putc(int ch)
+{
+ atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_DEBUG_UART_BASE;
+
+ while (!(readl(&usart->csr) & USART3_BIT(TXRDY)))
+ ;
+
+ writel(ch, &usart->thr);
+}
+
+DEBUG_UART_FUNCS
+#endif