+// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2000
* Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
* (C) Copyright 2004
* ARM Ltd.
* Philippe Robin, <philippe.robin@arm.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
/* Simple U-Boot driver for the PrimeCell PL010/PL011 UARTs */
#include <dm/platform_data/serial_pl01x.h>
#include <linux/compiler.h>
#include "serial_pl01x_internal.h"
-#include <fdtdec.h>
DECLARE_GLOBAL_DATA_PTR;
writel(0, ®s->pl010_cr);
break;
case TYPE_PL011:
-#ifdef CONFIG_PL011_SERIAL_FLUSH_ON_INIT
- /* Empty RX fifo if necessary */
- if (readl(®s->pl011_cr) & UART_PL011_CR_UARTEN) {
- while (!(readl(®s->fr) & UART_PL01x_FR_RXFE))
- readl(®s->dr);
- }
-#endif
/* disable everything */
writel(0, ®s->pl011_cr);
break;
* control register write
*/
lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN;
-#ifdef CONFIG_PL011_SERIAL_RLCR
- {
- int i;
-
- /*
- * Program receive line control register after waiting
- * 10 bus cycles. Delay be writing to readonly register
- * 10 times
- */
- for (i = 0; i < 10; i++)
- writel(lcr, ®s->fr);
-
- writel(lcr, ®s->pl011_rlcr);
- }
-#endif
writel(lcr, ®s->pl011_lcrh);
return 0;
}
divisor = UART_PL010_BAUD_9600;
break;
case 19200:
- divisor = UART_PL010_BAUD_9600;
+ divisor = UART_PL010_BAUD_19200;
break;
case 38400:
divisor = UART_PL010_BAUD_38400;
#ifdef CONFIG_DM_SERIAL
-struct pl01x_priv {
- struct pl01x_regs *regs;
- enum pl01x_type type;
-};
-
-static int pl01x_serial_setbrg(struct udevice *dev, int baudrate)
+int pl01x_serial_setbrg(struct udevice *dev, int baudrate)
{
struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
struct pl01x_priv *priv = dev_get_priv(dev);
- pl01x_generic_setbrg(priv->regs, priv->type, plat->clock, baudrate);
+ if (!plat->skip_init) {
+ pl01x_generic_setbrg(priv->regs, priv->type, plat->clock,
+ baudrate);
+ }
return 0;
}
-static int pl01x_serial_probe(struct udevice *dev)
+int pl01x_serial_probe(struct udevice *dev)
{
struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
struct pl01x_priv *priv = dev_get_priv(dev);
priv->regs = (struct pl01x_regs *)plat->base;
priv->type = plat->type;
- return pl01x_generic_serial_init(priv->regs, priv->type);
+ if (!plat->skip_init)
+ return pl01x_generic_serial_init(priv->regs, priv->type);
+ else
+ return 0;
}
-static int pl01x_serial_getc(struct udevice *dev)
+int pl01x_serial_getc(struct udevice *dev)
{
struct pl01x_priv *priv = dev_get_priv(dev);
return pl01x_getc(priv->regs);
}
-static int pl01x_serial_putc(struct udevice *dev, const char ch)
+int pl01x_serial_putc(struct udevice *dev, const char ch)
{
struct pl01x_priv *priv = dev_get_priv(dev);
return pl01x_putc(priv->regs, ch);
}
-static int pl01x_serial_pending(struct udevice *dev, bool input)
+int pl01x_serial_pending(struct udevice *dev, bool input)
{
struct pl01x_priv *priv = dev_get_priv(dev);
unsigned int fr = readl(&priv->regs->fr);
{}
};
-static int pl01x_serial_ofdata_to_platdata(struct udevice *dev)
+int pl01x_serial_ofdata_to_platdata(struct udevice *dev)
{
struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
fdt_addr_t addr;
- addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
plat->base = addr;
- plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "clock", 1);
+ plat->clock = dev_read_u32_default(dev, "clock", 1);
plat->type = dev_get_driver_data(dev);
+ plat->skip_init = dev_read_bool(dev, "skip-init");
+
return 0;
}
#endif
};
#endif
+
+#if defined(CONFIG_DEBUG_UART_PL010) || defined(CONFIG_DEBUG_UART_PL011)
+
+#include <debug_uart.h>
+
+static void _debug_uart_init(void)
+{
+#ifndef CONFIG_DEBUG_UART_SKIP_INIT
+ struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_DEBUG_UART_BASE;
+ enum pl01x_type type = CONFIG_IS_ENABLED(DEBUG_UART_PL011) ?
+ TYPE_PL011 : TYPE_PL010;
+
+ pl01x_generic_serial_init(regs, type);
+ pl01x_generic_setbrg(regs, type,
+ CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
+#endif
+}
+
+static inline void _debug_uart_putc(int ch)
+{
+ struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_DEBUG_UART_BASE;
+
+ pl01x_putc(regs, ch);
+}
+
+DEBUG_UART_FUNCS
+
+#endif