am335x-fb: cosmetic: update-copyright

[u-boot] / drivers / spi / Kconfig

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 0f51b3a21b87ae08a2a96b622a3e92c5afc04c41..494639fb0196faf0552a529b593c5b253f059bc5 100644 (file)
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -37,8 +37,8 @@ config ATMEL_SPI
        depends on ARCH_AT91
        help
          This enables driver for the Atmel SPI Controller, present on
-         many AT32 (AVR32) and AT91 (ARM) chips. This driver can be
-         used to access the SPI Flash, such as AT25DF321.
+         many AT91 (ARM) chips. This driver can be used to access
+         the SPI Flash, such as AT25DF321.
 
 config CADENCE_QSPI
        bool "Cadence QSPI driver"
@@ -124,6 +124,14 @@ config SANDBOX_SPI
                };
          };
 
+config STM32_QSPI
+       bool "STM32F7 QSPI driver"
+       depends on STM32F7
+       help
+         Enable the STM32F7 Quad-SPI (QSPI) driver. This driver can be
+         used to access the SPI NOR flash chips on platforms embedding
+         this ST IP core.
+
 config TEGRA114_SPI
        bool "nVidia Tegra114 SPI driver"
        help
@@ -180,15 +188,14 @@ config ZYNQ_QSPI
          Zynq QSPI IP core. This IP is used to connect the flash in
          4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel.
 
-config OMAP3_SPI
-       bool "McSPI driver for OMAP"
-       help
-         SPI master controller for OMAP24XX and later Multichannel SPI
-         (McSPI). This driver be used to access SPI chips on platforms
-         embedding this OMAP3 McSPI IP core.
-
 endif # if DM_SPI
 
+config SOFT_SPI
+       bool "Soft SPI driver"
+       help
+        Enable Soft SPI driver. This driver is to use GPIO simulate
+        the SPI protocol.
+
 config FSL_ESPI
        bool "Freescale eSPI driver"
        help
@@ -203,10 +210,30 @@ config FSL_QSPI
          used to access the SPI NOR flash on platforms embedding this
          Freescale IP core.
 
+config ATCSPI200_SPI
+       bool "Andestech ATCSPI200 SPI driver"
+       help
+         Enable the Andestech ATCSPI200 SPI driver. This driver can be
+         used to access the SPI flash on AE3XX and AE250 platforms embedding
+         this Andestech IP core.
+
 config TI_QSPI
        bool "TI QSPI driver"
        help
          Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
          This driver support spi flash single, quad and memory reads.
 
+config MPC8XX_SPI
+       bool "MPC8XX SPI Driver"
+       depends on 8xx
+       help
+         Enable support for SPI on MPC8XX
+
+config OMAP3_SPI
+       bool "McSPI driver for OMAP"
+       help
+         SPI master controller for OMAP24XX and later Multichannel SPI
+         (McSPI). This driver be used to access SPI chips on platforms
+         embedding this OMAP3 McSPI IP core.
+
 endmenu # menu "SPI Support"