net: emaclite: Use dynamic allocation

[u-boot] / drivers / spi / mxc_spi.c

diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index f909e076ea5eac35bd9a0baaee9856a4a9bafaa1..2fa748608f2bfe25046dd5f6c75e6fb860799850 100644 (file)
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -23,7 +23,7 @@
 #include <spi.h>
 #include <asm/errno.h>
 #include <asm/io.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/clock.h>
 
@@ -31,7 +31,7 @@
 /* i.MX27 has a completely wrong register layout and register definitions in the
  * datasheet, the correct one is in the Freescale's Linux driver */
 
-#error "i.MX27 CSPI not supported due to drastic differences in register definisions" \
+#error "i.MX27 CSPI not supported due to drastic differences in register definitions" \
 "See linux mxc_spi driver from Freescale for details."
 
 #elif defined(CONFIG_MX31)
@@ -60,8 +60,6 @@ static unsigned long spi_bases[] = {
        0x53f84000,
 };
 
-#define mxc_get_clock(x)       mx31_get_ipg_clk()
-
 #elif defined(CONFIG_MX51)
 
 #define MXC_CSPICTRL_EN                (1 << 0)
@@ -147,14 +145,14 @@ void spi_cs_activate(struct spi_slave *slave)
 {
        struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
        if (mxcs->gpio > 0)
-               mxc_gpio_set(mxcs->gpio, mxcs->ss_pol);
+               gpio_set_value(mxcs->gpio, mxcs->ss_pol);
 }
 
 void spi_cs_deactivate(struct spi_slave *slave)
 {
        struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
        if (mxcs->gpio > 0)
-               mxc_gpio_set(mxcs->gpio,
+               gpio_set_value(mxcs->gpio,
                              !(mxcs->ss_pol));
 }
 
@@ -470,7 +468,7 @@ static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs)
        if (cs > 3) {
                mxcs->gpio = cs >> 8;
                cs &= 3;
-               ret = mxc_gpio_direction(mxcs->gpio, OUT);
+               ret = gpio_direction_output(mxcs->gpio, 0);
                if (ret) {
                        printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio);
                        return -EINVAL;