/*
* Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <malloc.h>
#include <spi.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
#include <asm/io.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/imx-common/spi.h>
#ifdef CONFIG_MX27
/* i.MX27 has a completely wrong register layout and register definitions in the
* datasheet, the correct one is in the Freescale's Linux driver */
-#error "i.MX27 CSPI not supported due to drastic differences in register definisions" \
+#error "i.MX27 CSPI not supported due to drastic differences in register definitions" \
"See linux mxc_spi driver from Freescale for details."
-
-#elif defined(CONFIG_MX31)
-
-#include <asm/arch/mx31.h>
-
-#define MXC_CSPIRXDATA 0x00
-#define MXC_CSPITXDATA 0x04
-#define MXC_CSPICTRL 0x08
-#define MXC_CSPIINT 0x0C
-#define MXC_CSPIDMA 0x10
-#define MXC_CSPISTAT 0x14
-#define MXC_CSPIPERIOD 0x18
-#define MXC_CSPITEST 0x1C
-#define MXC_CSPIRESET 0x00
-
-#define MXC_CSPICTRL_EN (1 << 0)
-#define MXC_CSPICTRL_MODE (1 << 1)
-#define MXC_CSPICTRL_XCH (1 << 2)
-#define MXC_CSPICTRL_SMC (1 << 3)
-#define MXC_CSPICTRL_POL (1 << 4)
-#define MXC_CSPICTRL_PHA (1 << 5)
-#define MXC_CSPICTRL_SSCTL (1 << 6)
-#define MXC_CSPICTRL_SSPOL (1 << 7)
-#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 24)
-#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0x1f) << 8)
-#define MXC_CSPICTRL_DATARATE(x) (((x) & 0x7) << 16)
-#define MXC_CSPICTRL_TC (1 << 8)
-#define MXC_CSPICTRL_RXOVF (1 << 6)
-#define MXC_CSPICTRL_MAXBITS 0x1f
-
-#define MXC_CSPIPERIOD_32KHZ (1 << 15)
-#define MAX_SPI_BYTES 4
-
-static unsigned long spi_bases[] = {
- 0x43fa4000,
- 0x50010000,
- 0x53f84000,
-};
-
-#define mxc_get_clock(x) mx31_get_ipg_clk()
-
-#elif defined(CONFIG_MX51)
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/clock.h>
-
-#define MXC_CSPIRXDATA 0x00
-#define MXC_CSPITXDATA 0x04
-#define MXC_CSPICTRL 0x08
-#define MXC_CSPICON 0x0C
-#define MXC_CSPIINT 0x10
-#define MXC_CSPIDMA 0x14
-#define MXC_CSPISTAT 0x18
-#define MXC_CSPIPERIOD 0x1C
-#define MXC_CSPIRESET 0x00
-#define MXC_CSPICTRL_EN (1 << 0)
-#define MXC_CSPICTRL_MODE (1 << 1)
-#define MXC_CSPICTRL_XCH (1 << 2)
-#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 12)
-#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0xfff) << 20)
-#define MXC_CSPICTRL_PREDIV(x) (((x) & 0xF) << 12)
-#define MXC_CSPICTRL_POSTDIV(x) (((x) & 0xF) << 8)
-#define MXC_CSPICTRL_SELCHAN(x) (((x) & 0x3) << 18)
-#define MXC_CSPICTRL_MAXBITS 0xfff
-#define MXC_CSPICTRL_TC (1 << 7)
-#define MXC_CSPICTRL_RXOVF (1 << 6)
-
-#define MXC_CSPIPERIOD_32KHZ (1 << 15)
-#define MAX_SPI_BYTES 32
-
-/* Bit position inside CTRL register to be associated with SS */
-#define MXC_CSPICTRL_CHAN 18
-
-/* Bit position inside CON register to be associated with SS */
-#define MXC_CSPICON_POL 4
-#define MXC_CSPICON_PHA 0
-#define MXC_CSPICON_SSPOL 12
+#endif
static unsigned long spi_bases[] = {
- CSPI1_BASE_ADDR,
- CSPI2_BASE_ADDR,
- CSPI3_BASE_ADDR,
+ MXC_SPI_BASE_ADDRESSES
};
-#elif defined(CONFIG_MX35)
+__weak int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+ return -1;
+}
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/clock.h>
+#define OUT MXC_GPIO_DIRECTION_OUT
-#define MXC_CSPIRXDATA 0x00
-#define MXC_CSPITXDATA 0x04
-#define MXC_CSPICTRL 0x08
-#define MXC_CSPIINT 0x0C
-#define MXC_CSPIDMA 0x10
-#define MXC_CSPISTAT 0x14
-#define MXC_CSPIPERIOD 0x18
-#define MXC_CSPITEST 0x1C
-#define MXC_CSPIRESET 0x00
-
-#define MXC_CSPICTRL_EN (1 << 0)
-#define MXC_CSPICTRL_MODE (1 << 1)
-#define MXC_CSPICTRL_XCH (1 << 2)
-#define MXC_CSPICTRL_SMC (1 << 3)
-#define MXC_CSPICTRL_POL (1 << 4)
-#define MXC_CSPICTRL_PHA (1 << 5)
-#define MXC_CSPICTRL_SSCTL (1 << 6)
-#define MXC_CSPICTRL_SSPOL (1 << 7)
-#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 12)
-#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0xfff) << 20)
-#define MXC_CSPICTRL_DATARATE(x) (((x) & 0x7) << 16)
-#define MXC_CSPICTRL_TC (1 << 7)
-#define MXC_CSPICTRL_RXOVF (1 << 6)
-#define MXC_CSPICTRL_MAXBITS 0xfff
-
-#define MXC_CSPIPERIOD_32KHZ (1 << 15)
-#define MAX_SPI_BYTES 4
+#define reg_read readl
+#define reg_write(a, v) writel(v, a)
-static unsigned long spi_bases[] = {
- 0x43fa4000,
- 0x50010000,
-};
-
-#else
-#error "Unsupported architecture"
+#if !defined(CONFIG_SYS_SPI_MXC_WAIT)
+#define CONFIG_SYS_SPI_MXC_WAIT (CONFIG_SYS_HZ/100) /* 10 ms */
#endif
-#define OUT MXC_GPIO_DIRECTION_OUT
-
struct mxc_spi_slave {
struct spi_slave slave;
unsigned long base;
u32 ctrl_reg;
-#if defined(CONFIG_MX51)
+#if defined(MXC_ECSPI)
u32 cfg_reg;
#endif
int gpio;
int ss_pol;
+ unsigned int max_hz;
+ unsigned int mode;
};
static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave)
return container_of(slave, struct mxc_spi_slave, slave);
}
-static inline u32 reg_read(unsigned long addr)
-{
- return *(volatile unsigned long*)addr;
-}
-
-static inline void reg_write(unsigned long addr, u32 val)
-{
- *(volatile unsigned long*)addr = val;
-}
-
void spi_cs_activate(struct spi_slave *slave)
{
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
if (mxcs->gpio > 0)
- mxc_gpio_set(mxcs->gpio, mxcs->ss_pol);
+ gpio_set_value(mxcs->gpio, mxcs->ss_pol);
}
void spi_cs_deactivate(struct spi_slave *slave)
{
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
if (mxcs->gpio > 0)
- mxc_gpio_set(mxcs->gpio,
+ gpio_set_value(mxcs->gpio,
!(mxcs->ss_pol));
}
-#if defined(CONFIG_MX31) || defined(CONFIG_MX35)
-static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
+u32 get_cspi_div(u32 div)
+{
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ if (div <= (4 << i))
+ return i;
+ }
+ return i;
+}
+
+#ifdef MXC_CSPI
+static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs)
{
unsigned int ctrl_reg;
+ u32 clk_src;
+ u32 div;
+ unsigned int max_hz = mxcs->max_hz;
+ unsigned int mode = mxcs->mode;
+
+ clk_src = mxc_get_clock(MXC_CSPI_CLK);
+
+ div = DIV_ROUND_UP(clk_src, max_hz);
+ div = get_cspi_div(div);
+
+ debug("clk %d Hz, div %d, real clk %d Hz\n",
+ max_hz, div, clk_src / (4 << div));
ctrl_reg = MXC_CSPICTRL_CHIPSELECT(cs) |
MXC_CSPICTRL_BITCOUNT(MXC_CSPICTRL_MAXBITS) |
- MXC_CSPICTRL_DATARATE(7) | /* FIXME: calculate data rate */
+ MXC_CSPICTRL_DATARATE(div) |
MXC_CSPICTRL_EN |
#ifdef CONFIG_MX35
MXC_CSPICTRL_SSCTL |
}
#endif
-#if defined(CONFIG_MX51)
-static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
+#ifdef MXC_ECSPI
+static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs)
{
u32 clk_src = mxc_get_clock(MXC_CSPI_CLK);
- s32 pre_div = 0, post_div = 0, i, reg_ctrl, reg_config;
- u32 ss_pol = 0, sclkpol = 0, sclkpha = 0;
-
- if (max_hz == 0) {
- printf("Error: desired clock is 0\n");
- return -1;
- }
-
- reg_ctrl = reg_read(mxcs->base + MXC_CSPICTRL);
-
- /* Reset spi */
- reg_write(mxcs->base + MXC_CSPICTRL, 0);
- reg_write(mxcs->base + MXC_CSPICTRL, (reg_ctrl | 0x1));
+ s32 reg_ctrl, reg_config;
+ u32 ss_pol = 0, sclkpol = 0, sclkpha = 0, sclkctl = 0;
+ u32 pre_div = 0, post_div = 0;
+ struct cspi_regs *regs = (struct cspi_regs *)mxcs->base;
+ unsigned int max_hz = mxcs->max_hz;
+ unsigned int mode = mxcs->mode;
/*
- * The following computation is taken directly from Freescale's code.
+ * Reset SPI and set all CSs to master mode, if toggling
+ * between slave and master mode we might see a glitch
+ * on the clock line
*/
+ reg_ctrl = MXC_CSPICTRL_MODE_MASK;
+ reg_write(®s->ctrl, reg_ctrl);
+ reg_ctrl |= MXC_CSPICTRL_EN;
+ reg_write(®s->ctrl, reg_ctrl);
+
if (clk_src > max_hz) {
- pre_div = clk_src / max_hz;
- if (pre_div > 16) {
- post_div = pre_div / 16;
- pre_div = 15;
- }
- if (post_div != 0) {
- for (i = 0; i < 16; i++) {
- if ((1 << i) >= post_div)
- break;
- }
- if (i == 16) {
+ pre_div = (clk_src - 1) / max_hz;
+ /* fls(1) = 1, fls(0x80000000) = 32, fls(16) = 5 */
+ post_div = fls(pre_div);
+ if (post_div > 4) {
+ post_div -= 4;
+ if (post_div >= 16) {
printf("Error: no divider for the freq: %d\n",
max_hz);
return -1;
}
- post_div = i;
+ pre_div >>= post_div;
+ } else {
+ post_div = 0;
}
}
reg_ctrl = (reg_ctrl & ~MXC_CSPICTRL_POSTDIV(0x0F)) |
MXC_CSPICTRL_POSTDIV(post_div);
- /* always set to master mode */
- reg_ctrl |= 1 << (cs + 4);
-
- /* We need to disable SPI before changing registers */
- reg_ctrl &= ~MXC_CSPICTRL_EN;
-
if (mode & SPI_CS_HIGH)
ss_pol = 1;
- if (mode & SPI_CPOL)
+ if (mode & SPI_CPOL) {
sclkpol = 1;
+ sclkctl = 1;
+ }
if (mode & SPI_CPHA)
sclkpha = 1;
- reg_config = reg_read(mxcs->base + MXC_CSPICON);
+ reg_config = reg_read(®s->cfg);
/*
* Configuration register setup
(ss_pol << (cs + MXC_CSPICON_SSPOL));
reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_POL))) |
(sclkpol << (cs + MXC_CSPICON_POL));
+ reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_CTL))) |
+ (sclkctl << (cs + MXC_CSPICON_CTL));
reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_PHA))) |
(sclkpha << (cs + MXC_CSPICON_PHA));
debug("reg_ctrl = 0x%x\n", reg_ctrl);
- reg_write(mxcs->base + MXC_CSPICTRL, reg_ctrl);
+ reg_write(®s->ctrl, reg_ctrl);
debug("reg_config = 0x%x\n", reg_config);
- reg_write(mxcs->base + MXC_CSPICON, reg_config);
+ reg_write(®s->cfg, reg_config);
/* save config register and control register */
mxcs->ctrl_reg = reg_ctrl;
mxcs->cfg_reg = reg_config;
/* clear interrupt reg */
- reg_write(mxcs->base + MXC_CSPIINT, 0);
- reg_write(mxcs->base + MXC_CSPISTAT,
- MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
+ reg_write(®s->intr, 0);
+ reg_write(®s->stat, MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
return 0;
}
const u8 *dout, u8 *din, unsigned long flags)
{
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
- int nbytes = (bitlen + 7) / 8;
+ int nbytes = DIV_ROUND_UP(bitlen, 8);
u32 data, cnt, i;
+ struct cspi_regs *regs = (struct cspi_regs *)mxcs->base;
+ u32 ts;
+ int status;
debug("%s: bitlen %d dout 0x%x din 0x%x\n",
__func__, bitlen, (u32)dout, (u32)din);
~MXC_CSPICTRL_BITCOUNT(MXC_CSPICTRL_MAXBITS)) |
MXC_CSPICTRL_BITCOUNT(bitlen - 1);
- reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg | MXC_CSPICTRL_EN);
-#ifdef CONFIG_MX51
- reg_write(mxcs->base + MXC_CSPICON, mxcs->cfg_reg);
+ reg_write(®s->ctrl, mxcs->ctrl_reg | MXC_CSPICTRL_EN);
+#ifdef MXC_ECSPI
+ reg_write(®s->cfg, mxcs->cfg_reg);
#endif
/* Clear interrupt register */
- reg_write(mxcs->base + MXC_CSPISTAT,
- MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
+ reg_write(®s->stat, MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
/*
* The SPI controller works only with words,
}
debug("Sending SPI 0x%x\n", data);
- reg_write(mxcs->base + MXC_CSPITXDATA, data);
+ reg_write(®s->txdata, data);
nbytes -= cnt;
}
} else {
data = *(u32 *)dout;
data = cpu_to_be32(data);
+ dout += 4;
}
- dout += 4;
}
debug("Sending SPI 0x%x\n", data);
- reg_write(mxcs->base + MXC_CSPITXDATA, data);
+ reg_write(®s->txdata, data);
nbytes -= 4;
}
/* FIFO is written, now starts the transfer setting the XCH bit */
- reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg |
+ reg_write(®s->ctrl, mxcs->ctrl_reg |
MXC_CSPICTRL_EN | MXC_CSPICTRL_XCH);
+ ts = get_timer(0);
+ status = reg_read(®s->stat);
/* Wait until the TC (Transfer completed) bit is set */
- while ((reg_read(mxcs->base + MXC_CSPISTAT) & MXC_CSPICTRL_TC) == 0)
- ;
+ while ((status & MXC_CSPICTRL_TC) == 0) {
+ if (get_timer(ts) > CONFIG_SYS_SPI_MXC_WAIT) {
+ printf("spi_xchg_single: Timeout!\n");
+ return -1;
+ }
+ status = reg_read(®s->stat);
+ }
/* Transfer completed, clear any pending request */
- reg_write(mxcs->base + MXC_CSPISTAT,
- MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
+ reg_write(®s->stat, MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
- nbytes = (bitlen + 7) / 8;
+ nbytes = DIV_ROUND_UP(bitlen, 8);
cnt = nbytes % 32;
if (bitlen % 32) {
- data = reg_read(mxcs->base + MXC_CSPIRXDATA);
+ data = reg_read(®s->rxdata);
cnt = (bitlen % 32) / 8;
data = cpu_to_be32(data) >> ((sizeof(data) - cnt) * 8);
debug("SPI Rx unaligned: 0x%x\n", data);
while (nbytes > 0) {
u32 tmp;
- tmp = reg_read(mxcs->base + MXC_CSPIRXDATA);
+ tmp = reg_read(®s->rxdata);
data = cpu_to_be32(tmp);
debug("SPI Rx: 0x%x 0x%x\n", tmp, data);
- cnt = min(nbytes, sizeof(data));
+ cnt = min_t(u32, nbytes, sizeof(data));
if (din) {
memcpy(din, &data, cnt);
din += cnt;
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
void *din, unsigned long flags)
{
- int n_bytes = (bitlen + 7) / 8;
+ int n_bytes = DIV_ROUND_UP(bitlen, 8);
int n_bits;
int ret;
u32 blk_size;
spi_cs_activate(slave);
while (n_bytes > 0) {
-
if (n_bytes < MAX_SPI_BYTES)
blk_size = n_bytes;
else
{
}
-static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs)
+/*
+ * Some SPI devices require active chip-select over multiple
+ * transactions, we achieve this using a GPIO. Still, the SPI
+ * controller has to be configured to use one of its own chipselects.
+ * To use this feature you have to implement board_spi_cs_gpio() to assign
+ * a gpio value for each cs (-1 if cs doesn't need to use gpio).
+ * You must use some unused on this SPI controller cs between 0 and 3.
+ */
+static int setup_cs_gpio(struct mxc_spi_slave *mxcs,
+ unsigned int bus, unsigned int cs)
{
int ret;
- /*
- * Some SPI devices require active chip-select over multiple
- * transactions, we achieve this using a GPIO. Still, the SPI
- * controller has to be configured to use one of its own chipselects.
- * To use this feature you have to call spi_setup_slave() with
- * cs = internal_cs | (gpio << 8), and you have to use some unused
- * on this SPI controller cs between 0 and 3.
- */
- if (cs > 3) {
- mxcs->gpio = cs >> 8;
- cs &= 3;
- ret = mxc_gpio_direction(mxcs->gpio, OUT);
- if (ret) {
- printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio);
- return -EINVAL;
- }
- } else {
- mxcs->gpio = -1;
+ mxcs->gpio = board_spi_cs_gpio(bus, cs);
+ if (mxcs->gpio == -1)
+ return 0;
+
+ ret = gpio_direction_output(mxcs->gpio, !(mxcs->ss_pol));
+ if (ret) {
+ printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio);
+ return -EINVAL;
}
- return cs;
+ return 0;
}
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
if (bus >= ARRAY_SIZE(spi_bases))
return NULL;
- mxcs = malloc(sizeof(struct mxc_spi_slave));
+ if (max_hz == 0) {
+ printf("Error: desired clock is 0\n");
+ return NULL;
+ }
+
+ mxcs = spi_alloc_slave(struct mxc_spi_slave, bus, cs);
if (!mxcs) {
puts("mxc_spi: SPI Slave not allocated !\n");
return NULL;
}
- ret = decode_cs(mxcs, cs);
+ mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0;
+
+ ret = setup_cs_gpio(mxcs, bus, cs);
if (ret < 0) {
free(mxcs);
return NULL;
}
- cs = ret;
-
- mxcs->slave.bus = bus;
- mxcs->slave.cs = cs;
mxcs->base = spi_bases[bus];
- mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0;
+ mxcs->max_hz = max_hz;
+ mxcs->mode = mode;
- ret = spi_cfg_mxc(mxcs, cs, max_hz, mode);
- if (ret) {
- printf("mxc_spi: cannot setup SPI controller\n");
- free(mxcs);
- return NULL;
- }
return &mxcs->slave;
}
int spi_claim_bus(struct spi_slave *slave)
{
+ int ret;
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
+ struct cspi_regs *regs = (struct cspi_regs *)mxcs->base;
- reg_write(mxcs->base + MXC_CSPIRESET, 1);
+ reg_write(®s->rxdata, 1);
udelay(1);
- reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg);
- reg_write(mxcs->base + MXC_CSPIPERIOD,
- MXC_CSPIPERIOD_32KHZ);
- reg_write(mxcs->base + MXC_CSPIINT, 0);
+ ret = spi_cfg_mxc(mxcs, slave->cs);
+ if (ret) {
+ printf("mxc_spi: cannot setup SPI controller\n");
+ return ret;
+ }
+ reg_write(®s->period, MXC_CSPIPERIOD_32KHZ);
+ reg_write(®s->intr, 0);
return 0;
}