/*
* (C) Copyright 2013 Inc.
+ * (C) Copyright 2015 Jagan Teki <jteki@openedev.com>
*
* Xilinx Zynq PS SPI controller driver (master mode only)
*
#include <config.h>
#include <common.h>
+#include <dm.h>
+#include <errno.h>
#include <malloc.h>
#include <spi.h>
+#include <fdtdec.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* zynq spi register bit masks ZYNQ_SPI_<REG>_<BIT>_MASK */
#define ZYNQ_SPI_CR_MSA_MASK (1 << 15) /* Manual start enb */
#define ZYNQ_SPI_CR_MCS_MASK (1 << 14) /* Manual chip select */
u32 rxdr; /* 0x20 */
};
-/* zynq spi slave */
-struct zynq_spi_slave {
- struct spi_slave slave;
- struct zynq_spi_regs *base;
+
+/* zynq spi platform data */
+struct zynq_spi_platdata {
+ struct zynq_spi_regs *regs;
+ u32 frequency; /* input frequency */
+ u32 speed_hz;
+};
+
+/* zynq spi priv */
+struct zynq_spi_priv {
+ struct zynq_spi_regs *regs;
u8 mode;
u8 fifo_depth;
- u32 speed_hz;
- u32 input_hz;
- u32 req_hz;
+ u32 freq; /* required frequency */
};
-static inline struct zynq_spi_slave *to_zynq_spi_slave(struct spi_slave *slave)
+static int zynq_spi_ofdata_to_platdata(struct udevice *bus)
{
- return container_of(slave, struct zynq_spi_slave, slave);
-}
+ struct zynq_spi_platdata *plat = bus->platdata;
+ const void *blob = gd->fdt_blob;
+ int node = bus->of_offset;
-static inline struct zynq_spi_regs *get_zynq_spi_base(int dev)
-{
- if (dev)
- return (struct zynq_spi_regs *)ZYNQ_SPI_BASEADDR1;
- else
- return (struct zynq_spi_regs *)ZYNQ_SPI_BASEADDR0;
+ plat->regs = (struct zynq_spi_regs *)fdtdec_get_addr(blob, node, "reg");
+
+ /* FIXME: Use 250MHz as a suitable default */
+ plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
+ 250000000);
+ plat->speed_hz = plat->frequency / 2;
+
+ debug("%s: regs=%p max-frequency=%d\n", __func__,
+ plat->regs, plat->frequency);
+
+ return 0;
}
-static void zynq_spi_init_hw(struct zynq_spi_slave *zslave)
+static void zynq_spi_init_hw(struct zynq_spi_priv *priv)
{
+ struct zynq_spi_regs *regs = priv->regs;
u32 confr;
/* Disable SPI */
- writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr);
+ writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, ®s->enr);
/* Disable Interrupts */
- writel(ZYNQ_SPI_IXR_ALL_MASK, &zslave->base->idr);
+ writel(ZYNQ_SPI_IXR_ALL_MASK, ®s->idr);
/* Clear RX FIFO */
- while (readl(&zslave->base->isr) &
+ while (readl(®s->isr) &
ZYNQ_SPI_IXR_RXNEMPTY_MASK)
- readl(&zslave->base->rxdr);
+ readl(®s->rxdr);
/* Clear Interrupts */
- writel(ZYNQ_SPI_IXR_ALL_MASK, &zslave->base->isr);
+ writel(ZYNQ_SPI_IXR_ALL_MASK, ®s->isr);
/* Manual slave select and Auto start */
confr = ZYNQ_SPI_CR_MCS_MASK | ZYNQ_SPI_CR_CS_MASK |
ZYNQ_SPI_CR_MSTREN_MASK;
confr &= ~ZYNQ_SPI_CR_MSA_MASK;
- writel(confr, &zslave->base->cr);
+ writel(confr, ®s->cr);
/* Enable SPI */
- writel(ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr);
+ writel(ZYNQ_SPI_ENR_SPI_EN_MASK, ®s->enr);
}
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+static int zynq_spi_probe(struct udevice *bus)
{
- /* 2 bus with 3 chipselect */
- return bus < 2 && cs < 3;
+ struct zynq_spi_platdata *plat = dev_get_platdata(bus);
+ struct zynq_spi_priv *priv = dev_get_priv(bus);
+
+ priv->regs = plat->regs;
+ priv->fifo_depth = ZYNQ_SPI_FIFO_DEPTH;
+
+ /* init the zynq spi hw */
+ zynq_spi_init_hw(priv);
+
+ return 0;
}
-void spi_cs_activate(struct spi_slave *slave)
+static void spi_cs_activate(struct udevice *dev, uint cs)
{
- struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave);
+ struct udevice *bus = dev->parent;
+ struct zynq_spi_priv *priv = dev_get_priv(bus);
+ struct zynq_spi_regs *regs = priv->regs;
u32 cr;
- debug("spi_cs_activate: 0x%08x\n", (u32)slave);
-
- clrbits_le32(&zslave->base->cr, ZYNQ_SPI_CR_CS_MASK);
- cr = readl(&zslave->base->cr);
+ clrbits_le32(®s->cr, ZYNQ_SPI_CR_CS_MASK);
+ cr = readl(®s->cr);
/*
* CS cal logic: CS[13:10]
* xxx0 - cs0
* xx01 - cs1
* x011 - cs2
*/
- cr |= (~(0x1 << slave->cs) << 10) & ZYNQ_SPI_CR_CS_MASK;
- writel(cr, &zslave->base->cr);
+ cr |= (~(0x1 << cs) << 10) & ZYNQ_SPI_CR_CS_MASK;
+ writel(cr, ®s->cr);
}
-void spi_cs_deactivate(struct spi_slave *slave)
+static void spi_cs_deactivate(struct udevice *dev)
{
- struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave);
+ struct udevice *bus = dev->parent;
+ struct zynq_spi_priv *priv = dev_get_priv(bus);
+ struct zynq_spi_regs *regs = priv->regs;
- debug("spi_cs_deactivate: 0x%08x\n", (u32)slave);
-
- setbits_le32(&zslave->base->cr, ZYNQ_SPI_CR_CS_MASK);
+ setbits_le32(®s->cr, ZYNQ_SPI_CR_CS_MASK);
}
-void spi_init()
+static int zynq_spi_claim_bus(struct udevice *dev)
{
- /* nothing to do */
-}
+ struct udevice *bus = dev->parent;
+ struct zynq_spi_priv *priv = dev_get_priv(bus);
+ struct zynq_spi_regs *regs = priv->regs;
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct zynq_spi_slave *zslave;
+ writel(ZYNQ_SPI_ENR_SPI_EN_MASK, ®s->enr);
- if (!spi_cs_is_valid(bus, cs))
- return NULL;
-
- zslave = spi_alloc_slave(struct zynq_spi_slave, bus, cs);
- if (!zslave) {
- printf("SPI_error: Fail to allocate zynq_spi_slave\n");
- return NULL;
- }
-
- zslave->base = get_zynq_spi_base(bus);
- zslave->mode = mode;
- zslave->fifo_depth = ZYNQ_SPI_FIFO_DEPTH;
- zslave->input_hz = 166666700;
- zslave->speed_hz = zslave->input_hz / 2;
- zslave->req_hz = max_hz;
-
- /* init the zynq spi hw */
- zynq_spi_init_hw(zslave);
-
- return &zslave->slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
- struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave);
-
- debug("spi_free_slave: 0x%08x\n", (u32)slave);
- free(zslave);
+ return 0;
}
-int spi_claim_bus(struct spi_slave *slave)
+static int zynq_spi_release_bus(struct udevice *dev)
{
- struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave);
- u32 confr = 0;
- u8 baud_rate_val = 0;
-
- writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr);
+ struct udevice *bus = dev->parent;
+ struct zynq_spi_priv *priv = dev_get_priv(bus);
+ struct zynq_spi_regs *regs = priv->regs;
- /* Set the SPI Clock phase and polarities */
- confr = readl(&zslave->base->cr);
- confr &= ~(ZYNQ_SPI_CR_CPHA_MASK | ZYNQ_SPI_CR_CPOL_MASK);
- if (zslave->mode & SPI_CPHA)
- confr |= ZYNQ_SPI_CR_CPHA_MASK;
- if (zslave->mode & SPI_CPOL)
- confr |= ZYNQ_SPI_CR_CPOL_MASK;
-
- /* Set the clock frequency */
- if (zslave->req_hz == 0) {
- /* Set baudrate x8, if the req_hz is 0 */
- baud_rate_val = 0x2;
- } else if (zslave->speed_hz != zslave->req_hz) {
- while ((baud_rate_val < 8) &&
- ((zslave->input_hz /
- (2 << baud_rate_val)) > zslave->req_hz))
- baud_rate_val++;
- zslave->speed_hz = zslave->req_hz / (2 << baud_rate_val);
- }
- confr &= ~ZYNQ_SPI_CR_BRD_MASK;
- confr |= (baud_rate_val << 3);
- writel(confr, &zslave->base->cr);
-
- writel(ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr);
+ writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, ®s->enr);
return 0;
}
-void spi_release_bus(struct spi_slave *slave)
-{
- struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave);
-
- debug("spi_release_bus: 0x%08x\n", (u32)slave);
- writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr);
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
- void *din, unsigned long flags)
+static int zynq_spi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
{
- struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave);
+ struct udevice *bus = dev->parent;
+ struct zynq_spi_priv *priv = dev_get_priv(bus);
+ struct zynq_spi_regs *regs = priv->regs;
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
u32 len = bitlen / 8;
u32 tx_len = len, rx_len = len, tx_tvl;
const u8 *tx_buf = dout;
u32 ts, status;
debug("spi_xfer: bus:%i cs:%i bitlen:%i len:%i flags:%lx\n",
- slave->bus, slave->cs, bitlen, len, flags);
-
- if (bitlen == 0)
- return -1;
+ bus->seq, slave_plat->cs, bitlen, len, flags);
if (bitlen % 8) {
debug("spi_xfer: Non byte aligned SPI transfer\n");
}
if (flags & SPI_XFER_BEGIN)
- spi_cs_activate(slave);
+ spi_cs_activate(dev, slave_plat->cs);
while (rx_len > 0) {
/* Write the data into TX FIFO - tx threshold is fifo_depth */
tx_tvl = 0;
- while ((tx_tvl < zslave->fifo_depth) && tx_len) {
+ while ((tx_tvl < priv->fifo_depth) && tx_len) {
if (tx_buf)
buf = *tx_buf++;
else
buf = 0;
- writel(buf, &zslave->base->txdr);
+ writel(buf, ®s->txdr);
tx_len--;
tx_tvl++;
}
/* Check TX FIFO completion */
ts = get_timer(0);
- status = readl(&zslave->base->isr);
+ status = readl(®s->isr);
while (!(status & ZYNQ_SPI_IXR_TXOW_MASK)) {
if (get_timer(ts) > CONFIG_SYS_ZYNQ_SPI_WAIT) {
printf("spi_xfer: Timeout! TX FIFO not full\n");
return -1;
}
- status = readl(&zslave->base->isr);
+ status = readl(®s->isr);
}
/* Read the data from RX FIFO */
- status = readl(&zslave->base->isr);
+ status = readl(®s->isr);
while (status & ZYNQ_SPI_IXR_RXNEMPTY_MASK) {
- buf = readl(&zslave->base->rxdr);
+ buf = readl(®s->rxdr);
if (rx_buf)
*rx_buf++ = buf;
- status = readl(&zslave->base->isr);
+ status = readl(®s->isr);
rx_len--;
}
}
if (flags & SPI_XFER_END)
- spi_cs_deactivate(slave);
+ spi_cs_deactivate(dev);
+
+ return 0;
+}
+
+static int zynq_spi_set_speed(struct udevice *bus, uint speed)
+{
+ struct zynq_spi_platdata *plat = bus->platdata;
+ struct zynq_spi_priv *priv = dev_get_priv(bus);
+ struct zynq_spi_regs *regs = priv->regs;
+ uint32_t confr;
+ u8 baud_rate_val = 0;
+
+ if (speed > plat->frequency)
+ speed = plat->frequency;
+
+ /* Set the clock frequency */
+ confr = readl(®s->cr);
+ if (speed == 0) {
+ /* Set baudrate x8, if the freq is 0 */
+ baud_rate_val = 0x2;
+ } else if (plat->speed_hz != speed) {
+ while ((baud_rate_val < 8) &&
+ ((plat->frequency /
+ (2 << baud_rate_val)) > speed))
+ baud_rate_val++;
+ plat->speed_hz = speed / (2 << baud_rate_val);
+ }
+ confr &= ~ZYNQ_SPI_CR_BRD_MASK;
+ confr |= (baud_rate_val << 3);
+
+ writel(confr, ®s->cr);
+ priv->freq = speed;
+
+ debug("zynq_spi_set_speed: regs=%p, mode=%d\n", priv->regs, priv->freq);
+
+ return 0;
+}
+
+static int zynq_spi_set_mode(struct udevice *bus, uint mode)
+{
+ struct zynq_spi_priv *priv = dev_get_priv(bus);
+ struct zynq_spi_regs *regs = priv->regs;
+ uint32_t confr;
+
+ /* Set the SPI Clock phase and polarities */
+ confr = readl(®s->cr);
+ confr &= ~(ZYNQ_SPI_CR_CPHA_MASK | ZYNQ_SPI_CR_CPOL_MASK);
+
+ if (priv->mode & SPI_CPHA)
+ confr |= ZYNQ_SPI_CR_CPHA_MASK;
+ if (priv->mode & SPI_CPOL)
+ confr |= ZYNQ_SPI_CR_CPOL_MASK;
+
+ writel(confr, ®s->cr);
+ priv->mode = mode;
+
+ debug("zynq_spi_set_mode: regs=%p, mode=%d\n", priv->regs, priv->mode);
return 0;
}
+
+static const struct dm_spi_ops zynq_spi_ops = {
+ .claim_bus = zynq_spi_claim_bus,
+ .release_bus = zynq_spi_release_bus,
+ .xfer = zynq_spi_xfer,
+ .set_speed = zynq_spi_set_speed,
+ .set_mode = zynq_spi_set_mode,
+};
+
+static const struct udevice_id zynq_spi_ids[] = {
+ { .compatible = "xlnx,zynq-spi-r1p6" },
+ { }
+};
+
+U_BOOT_DRIVER(zynq_spi) = {
+ .name = "zynq_spi",
+ .id = UCLASS_SPI,
+ .of_match = zynq_spi_ids,
+ .ops = &zynq_spi_ops,
+ .ofdata_to_platdata = zynq_spi_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct zynq_spi_platdata),
+ .priv_auto_alloc_size = sizeof(struct zynq_spi_priv),
+ .probe = zynq_spi_probe,
+};