mpc83xx: make 8360 default environment fdt be 8360 (not 8349)

[u-boot] / drivers / tsec.c

diff --git a/drivers/tsec.c b/drivers/tsec.c
index 2524e4f6d2b6644a3ec69cb7324f16d37b202e4c..3f11eb03b41da825fee54a06daa9a5161b583be0 100644 (file)
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -381,6 +381,61 @@ uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
        return 0;
 }
 
+/*
+ * Parse the BCM54xx status register for speed and duplex information.
+ * The linux sungem_phy has this information, but in a table format.
+ */
+uint mii_parse_BCM54xx_sr(uint mii_reg, struct tsec_private *priv)
+{
+
+       switch((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >> MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT){
+
+               case 1:
+                       printf("Enet starting in 10BT/HD\n");
+                       priv->duplexity = 0;
+                       priv->speed = 10;
+                       break;
+
+               case 2:
+                       printf("Enet starting in 10BT/FD\n");
+                       priv->duplexity = 1;
+                       priv->speed = 10;
+                       break;
+
+               case 3:
+                       printf("Enet starting in 100BT/HD\n");
+                       priv->duplexity = 0;
+                       priv->speed = 100;
+                       break;
+
+               case 5:
+                       printf("Enet starting in 100BT/FD\n");
+                       priv->duplexity = 1;
+                       priv->speed = 100;
+                       break;
+
+               case 6:
+                       printf("Enet starting in 1000BT/HD\n");
+                       priv->duplexity = 0;
+                       priv->speed = 1000;
+                       break;
+
+               case 7:
+                       printf("Enet starting in 1000BT/FD\n");
+                       priv->duplexity = 1;
+                       priv->speed = 1000;
+                       break;
+
+               default:
+                       printf("Auto-neg error, defaulting to 10BT/HD\n");
+                       priv->duplexity = 0;
+                       priv->speed = 10;
+                       break;
+       }
+
+       return 0;
+
+}
 /* Parse the 88E1011's status register for speed and duplex
  * information
  */
@@ -770,6 +825,34 @@ static void tsec_halt(struct eth_device *dev)
                phy_run_commands(priv, priv->phyinfo->shutdown);
 }
 
+/* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
+struct phy_info phy_info_BCM5461S = {
+       0x02060c1,      /* 5461 ID */
+       "Broadcom BCM5461S",
+       0, /* not clear to me what minor revisions we can shift away */
+       (struct phy_cmd[]) { /* config */
+               /* Reset and configure the PHY */
+               {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+               {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+               {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+               {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+               {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+               {miim_end,}
+       },
+       (struct phy_cmd[]) { /* startup */
+               /* Status is read once to clear old link state */
+               {MIIM_STATUS, miim_read, NULL},
+               /* Auto-negotiate */
+               {MIIM_STATUS, miim_read, &mii_parse_sr},
+               /* Read the status */
+               {MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr},
+               {miim_end,}
+       },
+       (struct phy_cmd[]) { /* shutdown */
+               {miim_end,}
+       },
+};
+
 struct phy_info phy_info_M88E1011S = {
        0x01410c6,
        "Marvell 88E1011S",
@@ -1112,6 +1195,7 @@ struct phy_info phy_info_dp83865 = {
 struct phy_info *phy_info[] = {
        &phy_info_cis8204,
        &phy_info_cis8201,
+       &phy_info_BCM5461S,
        &phy_info_M88E1011S,
        &phy_info_M88E1111S,
        &phy_info_M88E1145,