#include <common.h>
#include <linux/usb/ch9.h>
+#include <usbdescriptors.h>
#include <asm/errno.h>
#include <linux/usb/gadget.h>
+#include <asm/unaligned.h>
#include "gadget_chips.h"
#define isdigit(c) ('0' <= (c) && (c) <= '9')
/* we must assign addresses for configurable endpoints (like net2280) */
static unsigned epnum;
-// #define MANY_ENDPOINTS
+/* #define MANY_ENDPOINTS */
#ifdef MANY_ENDPOINTS
/* more than 15 configurable endpoints */
static unsigned in_epnum;
* NOTE: each endpoint is unidirectional, as specified by its USB
* descriptor; and isn't specific to a configuration or altsetting.
*/
-static int
-ep_matches (
+static int ep_matches(
struct usb_gadget *gadget,
struct usb_ep *ep,
struct usb_endpoint_descriptor *desc
* direction-restriction: "in", "out".
*/
if ('-' != ep->name[2]) {
- tmp = strrchr (ep->name, '-');
+ tmp = strrchr(ep->name, '-');
if (tmp) {
switch (type) {
case USB_ENDPOINT_XFER_INT:
/* bulk endpoints handle interrupt transfers,
* except the toggle-quirky iso-synch kind
*/
- if ('s' == tmp[2]) // == "-iso"
+ if ('s' == tmp[2]) /* == "-iso" */
return 0;
/* for now, avoid PXA "interrupt-in";
* it's documented as never using DATA1.
*/
- if (gadget_is_pxa (gadget)
- && 'i' == tmp [1])
+ if (gadget_is_pxa(gadget)
+ && 'i' == tmp[1])
return 0;
break;
case USB_ENDPOINT_XFER_BULK:
- if ('b' != tmp[1]) // != "-bulk"
+ if ('b' != tmp[1]) /* != "-bulk" */
return 0;
break;
case USB_ENDPOINT_XFER_ISOC:
- if ('s' != tmp[2]) // != "-iso"
+ if ('s' != tmp[2]) /* != "-iso" */
return 0;
}
} else {
- tmp = ep->name + strlen (ep->name);
+ tmp = ep->name + strlen(ep->name);
}
/* direction-restriction: "..in-..", "out-.." */
tmp--;
- if (!isdigit (*tmp)) {
+ if (!isdigit(*tmp)) {
if (desc->bEndpointAddress & USB_DIR_IN) {
if ('n' != *tmp)
return 0;
* where it's an output parameter representing the full speed limit.
* the usb spec fixes high speed bulk maxpacket at 512 bytes.
*/
- max = 0x7ff & le16_to_cpu(desc->wMaxPacketSize);
+ max = 0x7ff & le16_to_cpu(get_unaligned(&desc->wMaxPacketSize));
switch (type) {
case USB_ENDPOINT_XFER_INT:
/* INT: limit 64 bytes full speed, 1024 high speed */
return 0;
/* BOTH: "high bandwidth" works only at high speed */
- if ((desc->wMaxPacketSize & __constant_cpu_to_le16(3<<11))) {
+ if ((get_unaligned(&desc->wMaxPacketSize) &
+ __constant_cpu_to_le16(3<<11))) {
if (!gadget->is_dualspeed)
return 0;
/* configure your hardware with enough buffering!! */
/* MATCH!! */
/* report address */
- if (isdigit (ep->name [2])) {
- u8 num = simple_strtoul (&ep->name [2], NULL, 10);
+ if (isdigit(ep->name[2])) {
+ u8 num = simple_strtoul(&ep->name[2], NULL, 10);
desc->bEndpointAddress |= num;
#ifdef MANY_ENDPOINTS
} else if (desc->bEndpointAddress & USB_DIR_IN) {
/* min() doesn't work on bitfields with gcc-3.5 */
if (size > 64)
size = 64;
- desc->wMaxPacketSize = cpu_to_le16(size);
+ put_unaligned(cpu_to_le16(size), &desc->wMaxPacketSize);
}
return 1;
}
static struct usb_ep *
-find_ep (struct usb_gadget *gadget, const char *name)
+find_ep(struct usb_gadget *gadget, const char *name)
{
struct usb_ep *ep;
- list_for_each_entry (ep, &gadget->ep_list, ep_list) {
- if (0 == strcmp (ep->name, name))
+ list_for_each_entry(ep, &gadget->ep_list, ep_list) {
+ if (0 == strcmp(ep->name, name))
return ep;
}
return NULL;
*
* On failure, this returns a null endpoint descriptor.
*/
-struct usb_ep * usb_ep_autoconfig (
+struct usb_ep *usb_ep_autoconfig(
struct usb_gadget *gadget,
struct usb_endpoint_descriptor *desc
)
/* First, apply chip-specific "best usage" knowledge.
* This might make a good usb_gadget_ops hook ...
*/
- if (gadget_is_net2280 (gadget) && type == USB_ENDPOINT_XFER_INT) {
+ if (gadget_is_net2280(gadget) && type == USB_ENDPOINT_XFER_INT) {
/* ep-e, ep-f are PIO with only 64 byte fifos */
- ep = find_ep (gadget, "ep-e");
- if (ep && ep_matches (gadget, ep, desc))
+ ep = find_ep(gadget, "ep-e");
+ if (ep && ep_matches(gadget, ep, desc))
return ep;
- ep = find_ep (gadget, "ep-f");
- if (ep && ep_matches (gadget, ep, desc))
+ ep = find_ep(gadget, "ep-f");
+ if (ep && ep_matches(gadget, ep, desc))
return ep;
- } else if (gadget_is_goku (gadget)) {
+ } else if (gadget_is_goku(gadget)) {
if (USB_ENDPOINT_XFER_INT == type) {
/* single buffering is enough */
- ep = find_ep (gadget, "ep3-bulk");
- if (ep && ep_matches (gadget, ep, desc))
+ ep = find_ep(gadget, "ep3-bulk");
+ if (ep && ep_matches(gadget, ep, desc))
return ep;
} else if (USB_ENDPOINT_XFER_BULK == type
&& (USB_DIR_IN & desc->bEndpointAddress)) {
/* DMA may be available */
- ep = find_ep (gadget, "ep2-bulk");
- if (ep && ep_matches (gadget, ep, desc))
+ ep = find_ep(gadget, "ep2-bulk");
+ if (ep && ep_matches(gadget, ep, desc))
return ep;
}
- } else if (gadget_is_sh (gadget) && USB_ENDPOINT_XFER_INT == type) {
+ } else if (gadget_is_sh(gadget) && USB_ENDPOINT_XFER_INT == type) {
/* single buffering is enough; maybe 8 byte fifo is too */
- ep = find_ep (gadget, "ep3in-bulk");
- if (ep && ep_matches (gadget, ep, desc))
+ ep = find_ep(gadget, "ep3in-bulk");
+ if (ep && ep_matches(gadget, ep, desc))
return ep;
- } else if (gadget_is_mq11xx (gadget) && USB_ENDPOINT_XFER_INT == type) {
- ep = find_ep (gadget, "ep1-bulk");
- if (ep && ep_matches (gadget, ep, desc))
+ } else if (gadget_is_mq11xx(gadget) && USB_ENDPOINT_XFER_INT == type) {
+ ep = find_ep(gadget, "ep1-bulk");
+ if (ep && ep_matches(gadget, ep, desc))
return ep;
}
/* Second, look at endpoints until an unclaimed one looks usable */
- list_for_each_entry (ep, &gadget->ep_list, ep_list) {
- if (ep_matches (gadget, ep, desc))
+ list_for_each_entry(ep, &gadget->ep_list, ep_list) {
+ if (ep_matches(gadget, ep, desc))
return ep;
}
* state such as ep->driver_data and the record of assigned endpoints
* used by usb_ep_autoconfig().
*/
-void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
+void usb_ep_autoconfig_reset(struct usb_gadget *gadget)
{
struct usb_ep *ep;
- list_for_each_entry (ep, &gadget->ep_list, ep_list) {
+ list_for_each_entry(ep, &gadget->ep_list, ep_list) {
ep->driver_data = NULL;
}
#ifdef MANY_ENDPOINTS
#endif
epnum = 0;
}
-