#include <asm/io.h>
#include <usb/ehci-fsl.h>
#include <hwconfig.h>
-#include <asm/fsl_errata.h>
+#include <fsl_usb.h>
+#include <fdt_support.h>
#include "ehci.h"
+#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#endif
+
static void set_txfifothresh(struct usb_ehci *, u32);
/* Check USB PHY clock valid */
break;
default:
printf("ERROR: wrong controller index!!\n");
- break;
+ return -EINVAL;
};
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
in_le32(&ehci->usbmode);
- if (SVR_SOC_VER(get_svr()) == SVR_T4240 &&
- IS_SVR_REV(get_svr(), 2, 0))
+ if (has_erratum_a007798())
set_txfifothresh(ehci, TXFIFOTHRESH);
+ if (has_erratum_a004477()) {
+ /*
+ * When reset is issued while any ULPI transaction is ongoing
+ * then it may result to corruption of ULPI Function Control
+ * Register which eventually causes phy clock to enter low
+ * power mode which stops the clock. Thus delay is required
+ * before reset to let ongoing ULPI transaction complete.
+ */
+ udelay(1);
+ }
return 0;
}
cmd |= TXFIFO_THRESH(txfifo_thresh);
ehci_writel(&ehci->txfilltuning, cmd);
}
+
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
+static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
+ const char *phy_type, int start_offset)
+{
+ const char *compat_dr = "fsl-usb2-dr";
+ const char *compat_mph = "fsl-usb2-mph";
+ const char *prop_mode = "dr_mode";
+ const char *prop_type = "phy_type";
+ const char *node_type = NULL;
+ int node_offset;
+ int err;
+
+ node_offset = fdt_node_offset_by_compatible(blob,
+ start_offset, compat_mph);
+ if (node_offset < 0) {
+ node_offset = fdt_node_offset_by_compatible(blob,
+ start_offset,
+ compat_dr);
+ if (node_offset < 0) {
+ printf("WARNING: could not find compatible node: %s",
+ fdt_strerror(node_offset));
+ return -1;
+ }
+ node_type = compat_dr;
+ } else {
+ node_type = compat_mph;
+ }
+
+ if (mode) {
+ err = fdt_setprop(blob, node_offset, prop_mode, mode,
+ strlen(mode) + 1);
+ if (err < 0)
+ printf("WARNING: could not set %s for %s: %s.\n",
+ prop_mode, node_type, fdt_strerror(err));
+ }
+
+ if (phy_type) {
+ err = fdt_setprop(blob, node_offset, prop_type, phy_type,
+ strlen(phy_type) + 1);
+ if (err < 0)
+ printf("WARNING: could not set %s for %s: %s.\n",
+ prop_type, node_type, fdt_strerror(err));
+ }
+
+ return node_offset;
+}
+
+static const char *fdt_usb_get_node_type(void *blob, int start_offset,
+ int *node_offset)
+{
+ const char *compat_dr = "fsl-usb2-dr";
+ const char *compat_mph = "fsl-usb2-mph";
+ const char *node_type = NULL;
+
+ *node_offset = fdt_node_offset_by_compatible(blob, start_offset,
+ compat_mph);
+ if (*node_offset < 0) {
+ *node_offset = fdt_node_offset_by_compatible(blob,
+ start_offset,
+ compat_dr);
+ if (*node_offset < 0) {
+ printf("ERROR: could not find compatible node: %s\n",
+ fdt_strerror(*node_offset));
+ } else {
+ node_type = compat_dr;
+ }
+ } else {
+ node_type = compat_mph;
+ }
+
+ return node_type;
+}
+
+static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
+ int start_offset)
+{
+ int node_offset, err;
+ const char *node_type = NULL;
+
+ node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
+ if (!node_type)
+ return -1;
+
+ err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0);
+ if (err < 0) {
+ printf("ERROR: could not set %s for %s: %s.\n",
+ prop_erratum, node_type, fdt_strerror(err));
+ }
+
+ return node_offset;
+}
+
+void fdt_fixup_dr_usb(void *blob, bd_t *bd)
+{
+ static const char * const modes[] = { "host", "peripheral", "otg" };
+ static const char * const phys[] = { "ulpi", "utmi", "utmi_dual" };
+ int usb_erratum_a006261_off = -1;
+ int usb_erratum_a007075_off = -1;
+ int usb_erratum_a007792_off = -1;
+ int usb_erratum_a005697_off = -1;
+ int usb_mode_off = -1;
+ int usb_phy_off = -1;
+ char str[5];
+ int i, j;
+
+ for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
+ const char *dr_mode_type = NULL;
+ const char *dr_phy_type = NULL;
+ int mode_idx = -1, phy_idx = -1;
+
+ snprintf(str, 5, "%s%d", "usb", i);
+ if (hwconfig(str)) {
+ for (j = 0; j < ARRAY_SIZE(modes); j++) {
+ if (hwconfig_subarg_cmp(str, "dr_mode",
+ modes[j])) {
+ mode_idx = j;
+ break;
+ }
+ }
+
+ for (j = 0; j < ARRAY_SIZE(phys); j++) {
+ if (hwconfig_subarg_cmp(str, "phy_type",
+ phys[j])) {
+ phy_idx = j;
+ break;
+ }
+ }
+
+ if (mode_idx < 0 && phy_idx < 0) {
+ printf("WARNING: invalid phy or mode\n");
+ return;
+ }
+
+ if (mode_idx > -1)
+ dr_mode_type = modes[mode_idx];
+
+ if (phy_idx > -1)
+ dr_phy_type = phys[phy_idx];
+ }
+
+ if (has_dual_phy())
+ dr_phy_type = phys[2];
+
+ usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
+ dr_mode_type, NULL,
+ usb_mode_off);
+
+ if (usb_mode_off < 0)
+ return;
+
+ usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
+ NULL, dr_phy_type,
+ usb_phy_off);
+
+ if (usb_phy_off < 0)
+ return;
+
+ if (has_erratum_a006261()) {
+ usb_erratum_a006261_off = fdt_fixup_usb_erratum
+ (blob,
+ "fsl,usb-erratum-a006261",
+ usb_erratum_a006261_off);
+ if (usb_erratum_a006261_off < 0)
+ return;
+ }
+
+ if (has_erratum_a007075()) {
+ usb_erratum_a007075_off = fdt_fixup_usb_erratum
+ (blob,
+ "fsl,usb-erratum-a007075",
+ usb_erratum_a007075_off);
+ if (usb_erratum_a007075_off < 0)
+ return;
+ }
+
+ if (has_erratum_a007792()) {
+ usb_erratum_a007792_off = fdt_fixup_usb_erratum
+ (blob,
+ "fsl,usb-erratum-a007792",
+ usb_erratum_a007792_off);
+ if (usb_erratum_a007792_off < 0)
+ return;
+ }
+ if (has_erratum_a005697()) {
+ usb_erratum_a005697_off = fdt_fixup_usb_erratum
+ (blob,
+ "fsl,usb-erratum-a005697",
+ usb_erratum_a005697_off);
+ if (usb_erratum_a005697_off < 0)
+ return;
+ }
+ }
+}
+#endif
projects / u-boot / blobdiff