]> git.sur5r.net Git - u-boot/blobdiff - drivers/usb/host/ehci-hcd.c
Merge branch 'next' of git://git.denx.de/u-boot-mpc83xx
[u-boot] / drivers / usb / host / ehci-hcd.c
index fdad739724eacb545817ebaf8128bdba96a82c91..3ae04c0253b694c32e310824627301b395e9ffe0 100644 (file)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 #endif
 
+/*
+ * EHCI spec page 20 says that the HC may take up to 16 uFrames (= 4ms) to halt.
+ * Let's time out after 8 to have a little safety margin on top of that.
+ */
+#define HCHALT_TIMEOUT (8 * 1000)
+
 static struct ehci_ctrl ehcic[CONFIG_USB_MAX_CONTROLLER_COUNT];
 
 #define ALIGN_END_ADDR(type, ptr, size)                        \
@@ -190,6 +196,36 @@ out:
        return ret;
 }
 
+static int ehci_shutdown(struct ehci_ctrl *ctrl)
+{
+       int i, ret = 0;
+       uint32_t cmd, reg;
+
+       cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
+       cmd &= ~(CMD_PSE | CMD_ASE);
+       ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
+       ret = handshake(&ctrl->hcor->or_usbsts, STS_ASS | STS_PSS, 0,
+               100 * 1000);
+
+       if (!ret) {
+               for (i = 0; i < CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS; i++) {
+                       reg = ehci_readl(&ctrl->hcor->or_portsc[i]);
+                       reg |= EHCI_PS_SUSP;
+                       ehci_writel(&ctrl->hcor->or_portsc[i], reg);
+               }
+
+               cmd &= ~CMD_RUN;
+               ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
+               ret = handshake(&ctrl->hcor->or_usbsts, STS_HALT, STS_HALT,
+                       HCHALT_TIMEOUT);
+       }
+
+       if (ret)
+               puts("EHCI failed to shut down host controller.\n");
+
+       return ret;
+}
+
 static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz)
 {
        uint32_t delta, next;
@@ -808,6 +844,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
                        }
                        break;
                case USB_PORT_FEAT_TEST:
+                       ehci_shutdown(ctrl);
                        reg &= ~(0xf << 16);
                        reg |= ((le16_to_cpu(req->index) >> 8) & 0xf) << 16;
                        ehci_writel(status_reg, reg);
@@ -878,6 +915,7 @@ unknown:
 
 int usb_lowlevel_stop(int index)
 {
+       ehci_shutdown(&ehcic[index]);
        return ehci_hcd_stop(index);
 }