+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2011 The Chromium OS Authors.
- * Copyright (c) 2009-2013 NVIDIA Corporation
+ * Copyright (c) 2009-2015 NVIDIA Corporation
* Copyright (c) 2013 Lucas Stach
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
#include <asm/io.h>
#include <asm-generic/gpio.h>
#include <asm/arch/clock.h>
#include <asm/arch-tegra/clk_rst.h>
#include <usb.h>
#include <usb/ulpi.h>
-#include <libfdt.h>
-#include <fdtdec.h>
+#include <linux/libfdt.h>
#include "ehci.h"
-DECLARE_GLOBAL_DATA_PTR;
-
#define USB1_ADDR_MASK 0xFFFF0000
#define HOSTPC1_DEVLC 0x84
USB_CTLR_T20,
USB_CTLR_T30,
USB_CTLR_T114,
+ USB_CTLR_T210,
USB_CTRL_COUNT,
};
{ 0x3C0, 0x0D, 0x00, 0xC, 0, 0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 },
{ 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 },
{ 0x3C0, 0x0C, 0x00, 0xC, 0, 0x02, 0x2F, 0x04, 0x76, 0x7530, 5 },
- { 0x3C0, 0x1A, 0x00, 0xC, 0, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 }
+ { 0x3C0, 0x1A, 0x00, 0xC, 0, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 },
+ { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 },
+ { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }
};
static const unsigned T30_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
{ 0x3C0, 0x0D, 0x00, 0xC, 1, 0x02, 0x33, 0x09, 0x7F, 0x7EF4, 5 },
{ 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x0C, 0xBB, 0xBB80, 7 },
{ 0x3C0, 0x0C, 0x00, 0xC, 1, 0x02, 0x2F, 0x08, 0x76, 0x7530, 5 },
- { 0x3C0, 0x1A, 0x00, 0xC, 1, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 }
+ { 0x3C0, 0x1A, 0x00, 0xC, 1, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 },
+ { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 },
+ { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }
};
static const unsigned T114_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
{ 0x3C0, 0x0D, 0x00, 0xC, 2, 0x02, 0x33, 0x09, 0x7F, 0x7EF4, 6 },
{ 0x0C8, 0x04, 0x00, 0x3, 2, 0x03, 0x4B, 0x0C, 0xBB, 0xBB80, 8 },
{ 0x3C0, 0x0C, 0x00, 0xC, 2, 0x02, 0x2F, 0x08, 0x76, 0x7530, 5 },
- { 0x3C0, 0x1A, 0x00, 0xC, 2, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 0xB }
+ { 0x3C0, 0x1A, 0x00, 0xC, 2, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 11 },
+ { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 },
+ { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }
+};
+
+/* NOTE: 13/26MHz settings are N/A for T210, so dupe 12MHz settings for now */
+static const unsigned T210_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
+ /* DivN, DivM, DivP, KCP, KVCO, Delays Debounce, Bias */
+ { 0x028, 0x01, 0x01, 0x0, 0, 0x02, 0x2F, 0x08, 0x76, 32500, 5 },
+ { 0x019, 0x01, 0x01, 0x0, 0, 0x03, 0x4B, 0x0C, 0xBB, 48000, 8 },
+ { 0x028, 0x01, 0x01, 0x0, 0, 0x02, 0x2F, 0x08, 0x76, 30000, 5 },
+ { 0x028, 0x01, 0x01, 0x0, 0, 0x02, 0x2F, 0x08, 0x76, 65000, 5 },
+ { 0x019, 0x02, 0x01, 0x0, 0, 0x05, 0x96, 0x18, 0x177, 96000, 15 },
+ { 0x028, 0x04, 0x01, 0x0, 0, 0x04, 0x66, 0x09, 0xFE, 120000, 20 }
};
/* UTMIP Idle Wait Delay */
.has_hostpc = 1,
.pll_parameter = (const unsigned *)T114_usb_pll,
},
+ {
+ .has_hostpc = 1,
+ .pll_parameter = (const unsigned *)T210_usb_pll,
+ },
};
/*
UTMIP_DEBOUNCE_CFG0_MASK,
timing[PARAM_DEBOUNCE_A_TIME] << UTMIP_DEBOUNCE_CFG0_SHIFT);
+ if (timing[PARAM_DEBOUNCE_A_TIME] > 0xFFFF) {
+ clrsetbits_le32(&usbctlr->utmip_debounce_cfg0,
+ UTMIP_DEBOUNCE_CFG0_MASK,
+ (timing[PARAM_DEBOUNCE_A_TIME] >> 1)
+ << UTMIP_DEBOUNCE_CFG0_SHIFT);
+ clrsetbits_le32(&usbctlr->utmip_bias_cfg1,
+ UTMIP_BIAS_DEBOUNCE_TIMESCALE_MASK,
+ 1 << UTMIP_BIAS_DEBOUNCE_TIMESCALE_SHIFT);
+ }
+
setbits_le32(&usbctlr->utmip_tx_cfg0, UTMIP_FS_PREAMBLE_J);
/* Disable battery charge enabling bit */
/* reset ULPI phy */
if (dm_gpio_is_valid(&config->phy_reset_gpio)) {
- dm_gpio_set_value(&config->phy_reset_gpio, 0);
- mdelay(5);
+ /*
+ * This GPIO is typically active-low, and marked as such in
+ * device tree. dm_gpio_set_value() takes this into account
+ * and inverts the value we pass here if required. In other
+ * words, this first call logically asserts the reset signal,
+ * which typically results in driving the physical GPIO low,
+ * and the second call logically de-asserts the reset signal,
+ * which typically results in driver the GPIO high.
+ */
dm_gpio_set_value(&config->phy_reset_gpio, 1);
+ mdelay(5);
+ dm_gpio_set_value(&config->phy_reset_gpio, 0);
}
/* Reset the usb controller */
static void config_clock(const u32 timing[])
{
+ debug("%s: DIVM = %d, DIVN = %d, DIVP = %d, cpcon/lfcon = %d/%d\n",
+ __func__, timing[PARAM_DIVM], timing[PARAM_DIVN],
+ timing[PARAM_DIVP], timing[PARAM_CPCON], timing[PARAM_LFCON]);
+
clock_start_pll(CLOCK_ID_USB,
timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP],
timing[PARAM_CPCON], timing[PARAM_LFCON]);
}
-static int fdt_decode_usb(const void *blob, int node, struct fdt_usb *config)
+static int fdt_decode_usb(struct udevice *dev, struct fdt_usb *config)
{
const char *phy, *mode;
- config->reg = (struct usb_ctlr *)fdtdec_get_addr(blob, node, "reg");
- mode = fdt_getprop(blob, node, "dr_mode", NULL);
+ config->reg = (struct usb_ctlr *)dev_read_addr(dev);
+ debug("reg=%p\n", config->reg);
+ mode = dev_read_string(dev, "dr_mode");
if (mode) {
if (0 == strcmp(mode, "host"))
config->dr_mode = DR_MODE_HOST;
config->dr_mode = DR_MODE_HOST;
}
- phy = fdt_getprop(blob, node, "phy_type", NULL);
+ phy = dev_read_string(dev, "phy_type");
config->utmi = phy && 0 == strcmp("utmi", phy);
config->ulpi = phy && 0 == strcmp("ulpi", phy);
- config->enabled = fdtdec_get_is_enabled(blob, node);
- config->has_legacy_mode = fdtdec_get_bool(blob, node,
- "nvidia,has-legacy-mode");
- config->periph_id = clock_decode_periph_id(blob, node);
+ config->has_legacy_mode = dev_read_bool(dev, "nvidia,has-legacy-mode");
+ config->periph_id = clock_decode_periph_id(dev);
if (config->periph_id == PERIPH_ID_NONE) {
debug("%s: Missing/invalid peripheral ID\n", __func__);
return -EINVAL;
}
- gpio_request_by_name_nodev(blob, node, "nvidia,vbus-gpio", 0,
- &config->vbus_gpio, GPIOD_IS_OUT);
- gpio_request_by_name_nodev(blob, node, "nvidia,phy-reset-gpio", 0,
- &config->phy_reset_gpio, GPIOD_IS_OUT);
- debug("enabled=%d, legacy_mode=%d, utmi=%d, ulpi=%d, periph_id=%d, "
- "vbus=%d, phy_reset=%d, dr_mode=%d\n",
- config->enabled, config->has_legacy_mode, config->utmi,
- config->ulpi, config->periph_id,
- gpio_get_number(&config->vbus_gpio),
- gpio_get_number(&config->phy_reset_gpio), config->dr_mode);
+ gpio_request_by_name(dev, "nvidia,vbus-gpio", 0, &config->vbus_gpio,
+ GPIOD_IS_OUT);
+ gpio_request_by_name(dev, "nvidia,phy-reset-gpio", 0,
+ &config->phy_reset_gpio, GPIOD_IS_OUT);
+ debug("legacy_mode=%d, utmi=%d, ulpi=%d, periph_id=%d, vbus=%d, phy_reset=%d, dr_mode=%d, reg=%p\n",
+ config->has_legacy_mode, config->utmi, config->ulpi,
+ config->periph_id, gpio_get_number(&config->vbus_gpio),
+ gpio_get_number(&config->phy_reset_gpio), config->dr_mode,
+ config->reg);
return 0;
}
struct fdt_usb *priv = dev_get_priv(dev);
int ret;
- ret = fdt_decode_usb(gd->fdt_blob, dev->of_offset, priv);
+ ret = fdt_decode_usb(dev, priv);
if (ret)
return ret;
plat->init_type);
}
-static int ehci_usb_remove(struct udevice *dev)
-{
- int ret;
-
- ret = ehci_deregister(dev);
- if (ret)
- return ret;
-
- return 0;
-}
-
static const struct udevice_id ehci_usb_ids[] = {
{ .compatible = "nvidia,tegra20-ehci", .data = USB_CTLR_T20 },
{ .compatible = "nvidia,tegra30-ehci", .data = USB_CTLR_T30 },
{ .compatible = "nvidia,tegra114-ehci", .data = USB_CTLR_T114 },
+ { .compatible = "nvidia,tegra210-ehci", .data = USB_CTLR_T210 },
{ }
};
.of_match = ehci_usb_ids,
.ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
.probe = ehci_usb_probe,
- .remove = ehci_usb_remove,
+ .remove = ehci_deregister,
.ops = &ehci_usb_ops,
.platdata_auto_alloc_size = sizeof(struct usb_platdata),
.priv_auto_alloc_size = sizeof(struct fdt_usb),
projects / u-boot / blobdiff