]> git.sur5r.net Git - u-boot/blobdiff - drivers/usb/host/ohci.h
powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x
[u-boot] / drivers / usb / host / ohci.h
index 9a4a2c24759111adf185be7cebdbffa0bd1f29b8..23508319320b06a510183d8a581b7587aa144784 100644 (file)
 /*
  * e.g. PCI controllers need this
  */
+
+#include <asm/io.h>
+
 #ifdef CONFIG_SYS_OHCI_SWAP_REG_ACCESS
-# define ohci_readl(a) __swap_32(*((volatile u32 *)(a)))
-# define ohci_writel(a, b) (*((volatile u32 *)(b)) = __swap_32((volatile u32)a))
+# define ohci_readl(a) __swap_32(readl(a))
+# define ohci_writel(v, a) writel(__swap_32(v), a)
 #else
-# define ohci_readl(a) (*((volatile u32 *)(a)))
-# define ohci_writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
+# define ohci_readl(a) readl(a)
+# define ohci_writel(v, a) writel(v, a)
 #endif /* CONFIG_SYS_OHCI_SWAP_REG_ACCESS */
 
+#if ARCH_DMA_MINALIGN > 16
+#define ED_ALIGNMENT ARCH_DMA_MINALIGN
+#else
+#define ED_ALIGNMENT 16
+#endif
+
+#if defined CONFIG_DM_USB && ARCH_DMA_MINALIGN > 32
+#define TD_ALIGNMENT ARCH_DMA_MINALIGN
+#else
+#define TD_ALIGNMENT 32
+#endif
+
 /* functions for doing board or CPU specific setup/cleanup */
 int usb_board_stop(void);
 
@@ -25,64 +40,7 @@ int usb_cpu_init(void);
 int usb_cpu_stop(void);
 int usb_cpu_init_fail(void);
 
-static int cc_to_error[16] = {
-
-/* mapping of the OHCI CC status to error codes */
-       /* No  Error  */               0,
-       /* CRC Error  */               USB_ST_CRC_ERR,
-       /* Bit Stuff  */               USB_ST_BIT_ERR,
-       /* Data Togg  */               USB_ST_CRC_ERR,
-       /* Stall      */               USB_ST_STALLED,
-       /* DevNotResp */               -1,
-       /* PIDCheck   */               USB_ST_BIT_ERR,
-       /* UnExpPID   */               USB_ST_BIT_ERR,
-       /* DataOver   */               USB_ST_BUF_ERR,
-       /* DataUnder  */               USB_ST_BUF_ERR,
-       /* reservd    */               -1,
-       /* reservd    */               -1,
-       /* BufferOver */               USB_ST_BUF_ERR,
-       /* BuffUnder  */               USB_ST_BUF_ERR,
-       /* Not Access */               -1,
-       /* Not Access */               -1
-};
-
-static const char *cc_to_string[16] = {
-       "No Error",
-       "CRC: Last data packet from endpoint contained a CRC error.",
-       "BITSTUFFING: Last data packet from endpoint contained a bit " \
-                    "stuffing violation",
-       "DATATOGGLEMISMATCH: Last packet from endpoint had data toggle PID\n" \
-                    "that did not match the expected value.",
-       "STALL: TD was moved to the Done Queue because the endpoint returned" \
-                    " a STALL PID",
-       "DEVICENOTRESPONDING: Device did not respond to token (IN) or did\n" \
-                    "not provide a handshake (OUT)",
-       "PIDCHECKFAILURE: Check bits on PID from endpoint failed on data PID\n"\
-                    "(IN) or handshake (OUT)",
-       "UNEXPECTEDPID: Receive PID was not valid when encountered or PID\n" \
-                    "value is not defined.",
-       "DATAOVERRUN: The amount of data returned by the endpoint exceeded\n" \
-                    "either the size of the maximum data packet allowed\n" \
-                    "from the endpoint (found in MaximumPacketSize field\n" \
-                    "of ED) or the remaining buffer size.",
-       "DATAUNDERRUN: The endpoint returned less than MaximumPacketSize\n" \
-                    "and that amount was not sufficient to fill the\n" \
-                    "specified buffer",
-       "reserved1",
-       "reserved2",
-       "BUFFEROVERRUN: During an IN, HC received data from endpoint faster\n" \
-                    "than it could be written to system memory",
-       "BUFFERUNDERRUN: During an OUT, HC could not retrieve data from\n" \
-                    "system memory fast enough to keep up with data USB " \
-                    "data rate.",
-       "NOT ACCESSED: This code is set by software before the TD is placed" \
-                    "on a list to be processed by the HC.(1)",
-       "NOT ACCESSED: This code is set by software before the TD is placed" \
-                    "on a list to be processed by the HC.(2)",
-};
-
 /* ED States */
-
 #define ED_NEW         0x00
 #define ED_UNLINK      0x01
 #define ED_OPER                0x02
@@ -109,7 +67,7 @@ struct ed {
        struct usb_device *usb_dev;
        void *purb;
        __u32 unused[2];
-} __attribute__((aligned(16)));
+} __attribute__((aligned(ED_ALIGNMENT)));
 typedef struct ed ed_t;
 
 
@@ -157,9 +115,7 @@ struct td {
        __u32 hwNextTD;         /* Next TD Pointer */
        __u32 hwBE;             /* Memory Buffer End Pointer */
 
-/* #ifndef CONFIG_MPC5200 /\* this seems wrong *\/ */
        __u16 hwPSW[MAXPSW];
-/* #endif */
        __u8 unused;
        __u8 index;
        struct ed *ed;
@@ -169,7 +125,7 @@ struct td {
        __u32 data;
 
        __u32 unused2[2];
-} __attribute__((aligned(32)));
+} __attribute__((aligned(TD_ALIGNMENT)));
 typedef struct td td_t;
 
 #define OHCI_ED_SKIP   (1 << 14)
@@ -183,13 +139,8 @@ typedef struct td td_t;
 #define NUM_INTS 32    /* part of the OHCI standard */
 struct ohci_hcca {
        __u32   int_table[NUM_INTS];    /* Interrupt ED table */
-#if defined(CONFIG_MPC5200)
-       __u16   pad1;                   /* set to 0 on each frame_no change */
-       __u16   frame_no;               /* current frame number */
-#else
        __u16   frame_no;               /* current frame number */
        __u16   pad1;                   /* set to 0 on each frame_no change */
-#endif
        __u32   done_head;              /* info returned for an interrupt */
        u8              reserved_for_hc[116];
 } __attribute__((aligned(256)));
@@ -408,6 +359,19 @@ typedef struct
 } urb_priv_t;
 #define URB_DEL 1
 
+#define NUM_EDS 8              /* num of preallocated endpoint descriptors */
+
+#define NUM_TD 64              /* we need more TDs than EDs */
+
+#define NUM_INT_DEVS 8         /* num of ohci_dev structs for int endpoints */
+
+typedef struct ohci_device {
+       ed_t ed[NUM_EDS] __aligned(ED_ALIGNMENT);
+       td_t tds[NUM_TD] __aligned(TD_ALIGNMENT);
+       int ed_cnt;
+       int devnum;
+} ohci_dev_t;
+
 /*
  * This is the full ohci controller description
  *
@@ -417,6 +381,9 @@ typedef struct
 
 
 typedef struct ohci {
+       /* this allocates EDs for all possible endpoints */
+       struct ohci_device ohci_dev __aligned(TD_ALIGNMENT);
+       struct ohci_device int_dev[NUM_INT_DEVS] __aligned(TD_ALIGNMENT);
        struct ohci_hcca *hcca;         /* hcca */
        /*dma_addr_t hcca_dma;*/
 
@@ -439,53 +406,9 @@ typedef struct ohci {
        const char      *slot_name;
 } ohci_t;
 
-#define NUM_EDS 8              /* num of preallocated endpoint descriptors */
+#ifdef CONFIG_DM_USB
+extern struct dm_usb_ops ohci_usb_ops;
 
-struct ohci_device {
-       ed_t    ed[NUM_EDS];
-       int ed_cnt;
-};
-
-/* hcd */
-/* endpoint */
-static int ep_link(ohci_t * ohci, ed_t * ed);
-static int ep_unlink(ohci_t * ohci, ed_t * ed);
-static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe,
-               int interval, int load);
-
-/*-------------------------------------------------------------------------*/
-
-/* we need more TDs than EDs */
-#define NUM_TD 64
-
-/* +1 so we can align the storage */
-td_t gtd[NUM_TD+1];
-/* pointers to aligned storage */
-td_t *ptd;
-
-/* TDs ... */
-static inline struct td *
-td_alloc (struct usb_device *usb_dev)
-{
-       int i;
-       struct td       *td;
-
-       td = NULL;
-       for (i = 0; i < NUM_TD; i++)
-       {
-               if (ptd[i].usb_dev == NULL)
-               {
-                       td = &ptd[i];
-                       td->usb_dev = usb_dev;
-                       break;
-               }
-       }
-
-       return td;
-}
-
-static inline void
-ed_free (struct ed *ed)
-{
-       ed->usb_dev = NULL;
-}
+int ohci_register(struct udevice *dev, struct ohci_regs *regs);
+int ohci_deregister(struct udevice *dev);
+#endif