#define USB_MSC_BBB_GET_MAX_LUN 0xFE
/* Endpoint configuration information */
-static struct musb_epinfo epinfo[3] = {
+static const struct musb_epinfo epinfo[3] = {
{MUSB_BULK_EP, 1, 512}, /* EP1 - Bluk Out - 512 Bytes */
{MUSB_BULK_EP, 0, 512}, /* EP1 - Bluk In - 512 Bytes */
{MUSB_INTR_EP, 0, 64} /* EP2 - Interrupt IN - 64 Bytes */
};
+/* --- Virtual Root Hub ---------------------------------------------------- */
+#ifdef MUSB_NO_MULTIPOINT
+static int rh_devnum;
+static u32 port_status;
+
+/* Device descriptor */
+static const u8 root_hub_dev_des[] = {
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x00, /* __u16 bcdUSB; v1.1 */
+ 0x02,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x00, /* __u8 iManufacturer; */
+ 0x01, /* __u8 iProduct; */
+ 0x00, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+/* Configuration descriptor */
+static const u8 root_hub_config_des[] = {
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes;
+ Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x00, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+ 0x02,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+static const unsigned char root_hub_str_index0[] = {
+ 0x04, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 0x09, /* __u8 lang ID */
+ 0x04, /* __u8 lang ID */
+};
+
+static const unsigned char root_hub_str_index1[] = {
+ 0x1c, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 'M', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'U', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'S', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'B', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'R', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 't', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'u', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'b', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+};
+#endif
+
/*
* This function writes the data toggle value.
*/
u16 csr;
if (dir_out) {
- if (!toggle)
- writew(MUSB_TXCSR_CLRDATATOG, &musbr->txcsr);
- else {
- csr = readw(&musbr->txcsr);
+ csr = readw(&musbr->txcsr);
+ if (!toggle) {
+ if (csr & MUSB_TXCSR_MODE)
+ csr = MUSB_TXCSR_CLRDATATOG;
+ else
+ csr = 0;
+ writew(csr, &musbr->txcsr);
+ } else {
csr |= MUSB_TXCSR_H_WR_DATATOGGLE;
writew(csr, &musbr->txcsr);
csr |= (toggle << MUSB_TXCSR_H_DATATOGGLE_SHIFT);
writew(csr, &musbr->txcsr);
}
} else {
- if (!toggle)
- writew(MUSB_RXCSR_CLRDATATOG, &musbr->rxcsr);
- else {
+ if (!toggle) {
+ csr = readw(&musbr->txcsr);
+ if (csr & MUSB_TXCSR_MODE)
+ csr = MUSB_RXCSR_CLRDATATOG;
+ else
+ csr = 0;
+ writew(csr, &musbr->rxcsr);
+ } else {
csr = readw(&musbr->rxcsr);
csr |= MUSB_RXCSR_H_WR_DATATOGGLE;
writew(csr, &musbr->rxcsr);
if (dev->parent->children[chid] == dev)
break;
+#ifndef MUSB_NO_MULTIPOINT
/* configure the hub address and the port address */
writeb(hub, &musbr->tar[ep].txhubaddr);
writeb((chid + 1), &musbr->tar[ep].txhubport);
writeb(hub, &musbr->tar[ep].rxhubaddr);
writeb((chid + 1), &musbr->tar[ep].rxhubport);
+#endif
+}
+
+#ifdef MUSB_NO_MULTIPOINT
+
+static void musb_port_reset(int do_reset)
+{
+ u8 power = readb(&musbr->power);
+
+ if (do_reset) {
+ power &= 0xf0;
+ writeb(power | MUSB_POWER_RESET, &musbr->power);
+ port_status |= USB_PORT_STAT_RESET;
+ port_status &= ~USB_PORT_STAT_ENABLE;
+ udelay(30000);
+ } else {
+ writeb(power & ~MUSB_POWER_RESET, &musbr->power);
+
+ power = readb(&musbr->power);
+ if (power & MUSB_POWER_HSMODE)
+ port_status |= USB_PORT_STAT_HIGH_SPEED;
+
+ port_status &= ~(USB_PORT_STAT_RESET | (USB_PORT_STAT_C_CONNECTION << 16));
+ port_status |= USB_PORT_STAT_ENABLE
+ | (USB_PORT_STAT_C_RESET << 16)
+ | (USB_PORT_STAT_C_ENABLE << 16);
+ }
+}
+
+/*
+ * root hub control
+ */
+static int musb_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len,
+ struct devrequest *cmd)
+{
+ int leni = transfer_len;
+ int len = 0;
+ int stat = 0;
+ u32 datab[4];
+ const u8 *data_buf = (u8 *) datab;
+ u16 bmRType_bReq;
+ u16 wValue;
+ u16 wIndex;
+ u16 wLength;
+ u16 int_usb;
+
+ if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+ debug("Root-Hub submit IRQ: NOT implemented\n");
+ return 0;
+ }
+
+ bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+ wValue = swap_16(cmd->value);
+ wIndex = swap_16(cmd->index);
+ wLength = swap_16(cmd->length);
+
+ debug("--- HUB ----------------------------------------\n");
+ debug("submit rh urb, req=%x val=%#x index=%#x len=%d\n",
+ bmRType_bReq, wValue, wIndex, wLength);
+ debug("------------------------------------------------\n");
+
+ switch (bmRType_bReq) {
+ case RH_GET_STATUS:
+ debug("RH_GET_STATUS\n");
+
+ *(__u16 *) data_buf = swap_16(1);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_INTERFACE:
+ debug("RH_GET_STATUS | RH_INTERFACE\n");
+
+ *(__u16 *) data_buf = swap_16(0);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_ENDPOINT:
+ debug("RH_GET_STATUS | RH_ENDPOINT\n");
+
+ *(__u16 *) data_buf = swap_16(0);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_CLASS:
+ debug("RH_GET_STATUS | RH_CLASS\n");
+
+ *(__u32 *) data_buf = swap_32(0);
+ len = 4;
+ break;
+
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+ debug("RH_GET_STATUS | RH_OTHER | RH_CLASS\n");
+
+ int_usb = readw(&musbr->intrusb);
+ if (int_usb & MUSB_INTR_CONNECT) {
+ port_status |= USB_PORT_STAT_CONNECTION
+ | (USB_PORT_STAT_C_CONNECTION << 16);
+ port_status |= USB_PORT_STAT_HIGH_SPEED
+ | USB_PORT_STAT_ENABLE;
+ }
+
+ if (port_status & USB_PORT_STAT_RESET)
+ musb_port_reset(0);
+
+ *(__u32 *) data_buf = swap_32(port_status);
+ len = 4;
+ break;
+
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ debug("RH_CLEAR_FEATURE | RH_ENDPOINT\n");
+
+ switch (wValue) {
+ case RH_ENDPOINT_STALL:
+ debug("C_HUB_ENDPOINT_STALL\n");
+ len = 0;
+ break;
+ }
+ port_status &= ~(1 << wValue);
+ break;
+
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ debug("RH_CLEAR_FEATURE | RH_CLASS\n");
+
+ switch (wValue) {
+ case RH_C_HUB_LOCAL_POWER:
+ debug("C_HUB_LOCAL_POWER\n");
+ len = 0;
+ break;
+
+ case RH_C_HUB_OVER_CURRENT:
+ debug("C_HUB_OVER_CURRENT\n");
+ len = 0;
+ break;
+ }
+ port_status &= ~(1 << wValue);
+ break;
+
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ debug("RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS\n");
+
+ switch (wValue) {
+ case RH_PORT_ENABLE:
+ len = 0;
+ break;
+
+ case RH_PORT_SUSPEND:
+ len = 0;
+ break;
+
+ case RH_PORT_POWER:
+ len = 0;
+ break;
+
+ case RH_C_PORT_CONNECTION:
+ len = 0;
+ break;
+
+ case RH_C_PORT_ENABLE:
+ len = 0;
+ break;
+
+ case RH_C_PORT_SUSPEND:
+ len = 0;
+ break;
+
+ case RH_C_PORT_OVER_CURRENT:
+ len = 0;
+ break;
+
+ case RH_C_PORT_RESET:
+ len = 0;
+ break;
+
+ default:
+ debug("invalid wValue\n");
+ stat = USB_ST_STALLED;
+ }
+
+ port_status &= ~(1 << wValue);
+ break;
+
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ debug("RH_SET_FEATURE | RH_OTHER | RH_CLASS\n");
+
+ switch (wValue) {
+ case RH_PORT_SUSPEND:
+ len = 0;
+ break;
+
+ case RH_PORT_RESET:
+ musb_port_reset(1);
+ len = 0;
+ break;
+
+ case RH_PORT_POWER:
+ len = 0;
+ break;
+
+ case RH_PORT_ENABLE:
+ len = 0;
+ break;
+
+ default:
+ debug("invalid wValue\n");
+ stat = USB_ST_STALLED;
+ }
+
+ port_status |= 1 << wValue;
+ break;
+
+ case RH_SET_ADDRESS:
+ debug("RH_SET_ADDRESS\n");
+
+ rh_devnum = wValue;
+ len = 0;
+ break;
+
+ case RH_GET_DESCRIPTOR:
+ debug("RH_GET_DESCRIPTOR: %x, %d\n", wValue, wLength);
+
+ switch (wValue) {
+ case (USB_DT_DEVICE << 8): /* device descriptor */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_dev_des),
+ wLength));
+ data_buf = root_hub_dev_des;
+ break;
+
+ case (USB_DT_CONFIG << 8): /* configuration descriptor */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_config_des),
+ wLength));
+ data_buf = root_hub_config_des;
+ break;
+
+ case ((USB_DT_STRING << 8) | 0x00): /* string 0 descriptors */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_str_index0),
+ wLength));
+ data_buf = root_hub_str_index0;
+ break;
+
+ case ((USB_DT_STRING << 8) | 0x01): /* string 1 descriptors */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_str_index1),
+ wLength));
+ data_buf = root_hub_str_index1;
+ break;
+
+ default:
+ debug("invalid wValue\n");
+ stat = USB_ST_STALLED;
+ }
+
+ break;
+
+ case RH_GET_DESCRIPTOR | RH_CLASS: {
+ u8 *_data_buf = (u8 *) datab;
+ debug("RH_GET_DESCRIPTOR | RH_CLASS\n");
+
+ _data_buf[0] = 0x09; /* min length; */
+ _data_buf[1] = 0x29;
+ _data_buf[2] = 0x1; /* 1 port */
+ _data_buf[3] = 0x01; /* per-port power switching */
+ _data_buf[3] |= 0x10; /* no overcurrent reporting */
+
+ /* Corresponds to data_buf[4-7] */
+ _data_buf[4] = 0;
+ _data_buf[5] = 5;
+ _data_buf[6] = 0;
+ _data_buf[7] = 0x02;
+ _data_buf[8] = 0xff;
+
+ len = min_t(unsigned int, leni,
+ min_t(unsigned int, data_buf[0], wLength));
+ break;
+ }
+
+ case RH_GET_CONFIGURATION:
+ debug("RH_GET_CONFIGURATION\n");
+
+ *(__u8 *) data_buf = 0x01;
+ len = 1;
+ break;
+
+ case RH_SET_CONFIGURATION:
+ debug("RH_SET_CONFIGURATION\n");
+
+ len = 0;
+ break;
+
+ default:
+ debug("*** *** *** unsupported root hub command *** *** ***\n");
+ stat = USB_ST_STALLED;
+ }
+
+ len = min_t(int, len, leni);
+ if (buffer != data_buf)
+ memcpy(buffer, data_buf, len);
+
+ dev->act_len = len;
+ dev->status = stat;
+ debug("dev act_len %d, status %lu\n", dev->act_len, dev->status);
+
+ return stat;
+}
+
+static void musb_rh_init(void)
+{
+ rh_devnum = 0;
+ port_status = 0;
}
+#else
+
+static void musb_rh_init(void) {}
+
+#endif
+
/*
* do a control transfer
*/
int len, struct devrequest *setup)
{
int devnum = usb_pipedevice(pipe);
- u16 csr;
u8 devspeed;
+#ifdef MUSB_NO_MULTIPOINT
+ /* Control message is for the HUB? */
+ if (devnum == rh_devnum) {
+ int stat = musb_submit_rh_msg(dev, pipe, buffer, len, setup);
+ if (stat)
+ return stat;
+ }
+#endif
+
/* select control endpoint */
writeb(MUSB_CONTROL_EP, &musbr->index);
- csr = readw(&musbr->txcsr);
+ readw(&musbr->txcsr);
+#ifndef MUSB_NO_MULTIPOINT
/* target addr and (for multipoint) hub addr/port */
writeb(devnum, &musbr->tar[MUSB_CONTROL_EP].txfuncaddr);
writeb(devnum, &musbr->tar[MUSB_CONTROL_EP].rxfuncaddr);
+#endif
/* configure the hub address and the port number as required */
devspeed = get_dev_speed(dev);
writeb(devspeed << 6, &musbr->txtype);
} else {
writeb(musb_cfg.musb_speed << 6, &musbr->txtype);
+#ifndef MUSB_NO_MULTIPOINT
writeb(0, &musbr->tar[MUSB_CONTROL_EP].txhubaddr);
writeb(0, &musbr->tar[MUSB_CONTROL_EP].txhubport);
writeb(0, &musbr->tar[MUSB_CONTROL_EP].rxhubaddr);
writeb(0, &musbr->tar[MUSB_CONTROL_EP].rxhubport);
+#endif
}
/* Control transfer setup phase */
dev->status = 0;
dev->act_len = len;
+
+#ifdef MUSB_NO_MULTIPOINT
+ /* Set device address to USB_FADDR register */
+ if (setup->request == USB_REQ_SET_ADDRESS)
+ writeb(dev->devnum, &musbr->faddr);
+#endif
+
return len;
}
{
int dir_out = usb_pipeout(pipe);
int ep = usb_pipeendpoint(pipe);
+#ifndef MUSB_NO_MULTIPOINT
int devnum = usb_pipedevice(pipe);
+#endif
u8 type;
u16 csr;
u32 txlen = 0;
/* select bulk endpoint */
writeb(MUSB_BULK_EP, &musbr->index);
+#ifndef MUSB_NO_MULTIPOINT
/* write the address of the device */
if (dir_out)
writeb(devnum, &musbr->tar[MUSB_BULK_EP].txfuncaddr);
else
writeb(devnum, &musbr->tar[MUSB_BULK_EP].rxfuncaddr);
+#endif
/* configure the hub address and the port number as required */
devspeed = get_dev_speed(dev);
*/
config_hub_port(dev, MUSB_BULK_EP);
} else {
+#ifndef MUSB_NO_MULTIPOINT
if (dir_out) {
writeb(0, &musbr->tar[MUSB_BULK_EP].txhubaddr);
writeb(0, &musbr->tar[MUSB_BULK_EP].txhubport);
writeb(0, &musbr->tar[MUSB_BULK_EP].rxhubaddr);
writeb(0, &musbr->tar[MUSB_BULK_EP].rxhubport);
}
+#endif
devspeed = musb_cfg.musb_speed;
}
nextlen = ((len-txlen) < dev->epmaxpacketout[ep]) ?
(len-txlen) : dev->epmaxpacketout[ep];
+#ifdef CONFIG_USB_BLACKFIN
+ /* Set the transfer data size */
+ writew(nextlen, &musbr->txcount);
+#endif
+
/* Write the data to the FIFO */
write_fifo(MUSB_BULK_EP, nextlen,
(void *)(((u8 *)buffer) + txlen));
(len-txlen) : dev->epmaxpacketin[ep];
/* Set the ReqPkt bit */
- writew(MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
+ csr = readw(&musbr->rxcsr);
+ writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
/* Wait until the RxPktRdy bit is set */
if (!wait_until_rxep_ready(dev, MUSB_BULK_EP)) {
/*
* This function initializes the usb controller module.
*/
-int usb_lowlevel_init(void)
+int usb_lowlevel_init(int index, void **controller)
{
u8 power;
u32 timeout;
+ musb_rh_init();
+
if (musb_platform_init() == -1)
return -1;
* should be a usb device connected.
*/
timeout = musb_cfg.timeout;
- while (timeout--)
+ while (--timeout)
if (readb(&musbr->devctl) & MUSB_DEVCTL_HM)
break;
/*
* This function stops the operation of the davinci usb module.
*/
-int usb_lowlevel_stop(void)
+int usb_lowlevel_stop(int index)
{
/* Reset the USB module */
musb_platform_deinit();
{
int dir_out = usb_pipeout(pipe);
int ep = usb_pipeendpoint(pipe);
+#ifndef MUSB_NO_MULTIPOINT
int devnum = usb_pipedevice(pipe);
+#endif
u8 type;
u16 csr;
u32 txlen = 0;
/* select interrupt endpoint */
writeb(MUSB_INTR_EP, &musbr->index);
+#ifndef MUSB_NO_MULTIPOINT
/* write the address of the device */
if (dir_out)
writeb(devnum, &musbr->tar[MUSB_INTR_EP].txfuncaddr);
else
writeb(devnum, &musbr->tar[MUSB_INTR_EP].rxfuncaddr);
+#endif
/* configure the hub address and the port number as required */
devspeed = get_dev_speed(dev);
*/
config_hub_port(dev, MUSB_INTR_EP);
} else {
+#ifndef MUSB_NO_MULTIPOINT
if (dir_out) {
writeb(0, &musbr->tar[MUSB_INTR_EP].txhubaddr);
writeb(0, &musbr->tar[MUSB_INTR_EP].txhubport);
writeb(0, &musbr->tar[MUSB_INTR_EP].rxhubaddr);
writeb(0, &musbr->tar[MUSB_INTR_EP].rxhubport);
}
+#endif
devspeed = musb_cfg.musb_speed;
}
(len-txlen) : dev->epmaxpacketin[ep];
/* Set the ReqPkt bit */
- writew(MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
+ csr = readw(&musbr->rxcsr);
+ writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
/* Wait until the RxPktRdy bit is set */
if (!wait_until_rxep_ready(dev, MUSB_INTR_EP)) {
dev->act_len = len;
return 0;
}
-
-
-#ifdef CONFIG_SYS_USB_EVENT_POLL
-/*
- * This function polls for USB keyboard data.
- */
-void usb_event_poll()
-{
- struct stdio_dev *dev;
- struct usb_device *usb_kbd_dev;
- struct usb_interface *iface;
- struct usb_endpoint_descriptor *ep;
- int pipe;
- int maxp;
-
- /* Get the pointer to USB Keyboard device pointer */
- dev = stdio_get_by_name("usbkbd");
- usb_kbd_dev = (struct usb_device *)dev->priv;
- iface = &usb_kbd_dev->config.if_desc[0];
- ep = &iface->ep_desc[0];
- pipe = usb_rcvintpipe(usb_kbd_dev, ep->bEndpointAddress);
-
- /* Submit a interrupt transfer request */
- maxp = usb_maxpacket(usb_kbd_dev, pipe);
- usb_submit_int_msg(usb_kbd_dev, pipe, &new[0],
- maxp > 8 ? 8 : maxp, ep->bInterval);
-}
-#endif /* CONFIG_SYS_USB_EVENT_POLL */