Set maximum framebuffer size to be used for Freescale Display
Controller Unit (DCU4).
-config VIDEO_ROCKCHIP
- bool "Enable Rockchip video support"
- depends on DM_VIDEO
- help
- Rockchip SoCs provide video output capabilities for High-Definition
- Multimedia Interface (HDMI), Low-voltage Differential Signalling
- (LVDS), embedded DisplayPort (eDP) and Display Serial Interface
- (DSI). This driver supports the on-chip video output device, and
- targets the Rockchip RK3288.
+source "drivers/video/rockchip/Kconfig"
config VIDEO_SANDBOX_SDL
bool "Enable sandbox video console using SDL"
console jump but can help speed up operation when scrolling
is slow.
-config VIDEO_CT69000
- bool "Enable Chips & Technologies 69000 video driver"
- depends on VIDEO
- help
- This enables a frame buffer driver for the Chips & Technologies
- ct69000, a fairly old graphics device (circa 2000) which is used
- on some hardware. It operates over the ISA bus, and supports
- some acceleration features.
-
- For the CT69000 and SMI_LYNXEM drivers, videomode is
- selected via environment 'videomode'. Two different ways
- are possible:
- - "videomode=num" 'num' is a standard LiLo mode numbers.
- Following standard modes are supported (* is default):
-
- Colors 640x480 800x600 1024x768 1152x864 1280x1024
- -------------+---------------------------------------------
- 8 bits | 0x301* 0x303 0x305 0x161 0x307
- 15 bits | 0x310 0x313 0x316 0x162 0x319
- 16 bits | 0x311 0x314 0x317 0x163 0x31A
- 24 bits | 0x312 0x315 0x318 ? 0x31B
- -------------+---------------------------------------------
- (i.e. setenv videomode 317; saveenv; reset;)
-
- - "videomode=bootargs" all the video parameters are parsed
- from the bootargs. (See drivers/video/videomodes.c)
-
config SYS_CONSOLE_BG_COL
hex "Background colour"
- depends on CFB_CONSOLE || VIDEO_CT69000
+ depends on CFB_CONSOLE
default 0x00
help
Defines the background colour for the console. The value is from
config SYS_CONSOLE_FG_COL
hex "Foreground colour"
- depends on CFB_CONSOLE || VIDEO_CT69000
+ depends on CFB_CONSOLE
default 0xa0
help
Defines the foreground colour for the console. The value is from
CONFIG option. See the README for details. Drives which have been
converted to driver model will instead used CONFIG_DM_VIDEO.
+config VIDEO_DW_HDMI
+ bool
+ help
+ Enables the common driver code for the Designware HDMI TX
+ block found in SoCs from various vendors.
+ As this does not provide any functionality by itself (but
+ rather requires a SoC-specific glue driver to call it), it
+ can not be enabled from the configuration menu.
+
endmenu