rockchip: video: Kconfig: Add Kconfig for rockchip video driver

[u-boot] / drivers / video / Kconfig

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 39992466495c23acaf3f5a519c2bfe842ec41e54..446cca90d4b63fcd093923efbec500c8b010ea39 100644 (file)
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -89,6 +89,15 @@ config CONSOLE_TRUETYPE_SIZE
          method to select the display's physical size, which would allow
          U-Boot to calculate the correct font size.
 
+config SYS_WHITE_ON_BLACK
+       bool "Display console as white on a black background"
+       default y if ARCH_AT91 || ARCH_EXYNOS || ARCH_ROCKCHIP || TEGRA || X86
+       help
+        Normally the display is black on a white background, Enable this
+        option to invert this, i.e. white on a black background. This can be
+        better in low-light situations or to reduce eye strain in some
+        cases.
+
 source "drivers/video/fonts/Kconfig"
 
 config VIDCONSOLE_AS_LCD
@@ -371,6 +380,12 @@ config DISPLAY
           The devices provide a simple interface to start up the display,
           read display information and enable it.
 
+config ATMEL_HLCD
+       bool "Enable ATMEL video support using HLCDC"
+       depends on DM_VIDEO
+       help
+          HLCDC supports video output to an attached LCD panel.
+
 config VIDEO_BROADWELL_IGD
        bool "Enable Intel Broadwell integrated graphics device"
        depends on X86
@@ -395,15 +410,22 @@ config VIDEO_IVYBRIDGE_IGD
          a special tool which configures the VGA ROM, but the graphics
          resolution can be selected in U-Boot.
 
-config VIDEO_ROCKCHIP
-       bool "Enable Rockchip video support"
-       depends on DM_VIDEO
+config VIDEO_FSL_DCU_FB
+       bool "Enable Freescale Display Control Unit"
+       depends on VIDEO
+       help
+        This enables support for Freescale Display Control Unit (DCU4)
+        module found on Freescale Vybrid and QorIQ family of SoCs.
+
+config VIDEO_FSL_DCU_MAX_FB_SIZE_MB
+       int "Freescale DCU framebuffer size"
+       depends on VIDEO_FSL_DCU_FB
+       default 4194304
        help
-          Rockchip SoCs provide video output capabilities for High-Definition
-          Multimedia Interface (HDMI), Low-voltage Differential Signalling
-          (LVDS), embedded DisplayPort (eDP) and Display Serial Interface
-          (DSI). This driver supports the on-chip video output device, and
-          targets the Rockchip RK3288.
+        Set maximum framebuffer size to be used for Freescale Display
+        Controller Unit (DCU4).
+
+source "drivers/video/rockchip/Kconfig"
 
 config VIDEO_SANDBOX_SDL
        bool "Enable sandbox video console using SDL"
@@ -443,6 +465,13 @@ config VIDEO
          model. Video drivers typically provide a colour text console and
          cursor.
 
+config VIDEO_IPUV3
+       bool "i.MX IPUv3 Core video support"
+       depends on VIDEO && MX6
+       help
+         This enables framebuffer driver for i.MX processors working
+         on the IPUv3(Image Processing Unit) internal graphic processor.
+
 config CFB_CONSOLE
        bool "Enable colour frame buffer console"
        depends on VIDEO
@@ -493,6 +522,46 @@ config CFB_CONSOLE_ANSI
          erase functions and limited graphics rendition control). Normal
          output from U-Boot will pass through this filter.
 
+config VGA_AS_SINGLE_DEVICE
+       bool "Set the video as an output-only device"
+       depends on CFB_CONSOLE
+       default y
+       help
+         If enable the framebuffer device will be initialized as an
+         output-only device. The Keyboard driver will not be set up. This
+         may be used if you have no keyboard device, or more than one
+         (USB Keyboard, AT Keyboard).
+
+config VIDEO_SW_CURSOR
+       bool "Enable a software cursor"
+       depends on CFB_CONSOLE
+       default y if CFB_CONSOLE
+       help
+         This draws a cursor after the last character. No blinking is
+         provided. This makes it possible to see the current cursor
+         position when entering text on the console. It is recommended to
+         enable this.
+
+config CONSOLE_EXTRA_INFO
+       bool "Display additional board information"
+       depends on CFB_CONSOLE
+       help
+         Display additional board information strings that normally go to
+         the serial port. When this option is enabled, a board-specific
+         function video_get_info_str() is called to get the string for
+         each line of the display. The function should return the string,
+         which can be empty if there is nothing to display for that line.
+
+config CONSOLE_SCROLL_LINES
+       int "Number of lines to scroll the console by"
+       depends on CFB_CONSOLE || DM_VIDEO || LCD
+       default 1
+       help
+         When the console need to be scrolled, this is the number of
+         lines to scroll by. It defaults to 1. Increasing this makes the
+         console jump but can help speed up operation when scrolling
+         is slow.
+
 config VIDEO_CT69000
        bool "Enable Chips & Technologies 69000 video driver"
        depends on VIDEO