/*
- * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at>
- * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
+ * Copyright (C) 2013-2018 Hannes Schmelzer <oe5hpm@oevsv.at>
+ * B&R Industrial Automation GmbH - http://www.br-automation.com
*
* minimal framebuffer driver for TI's AM335x SoC to be compatible with
* Wolfgang Denk's LCD-Framework (CONFIG_LCD, common/lcd.c)
*
- * - supporting only 24bit RGB/TFT raster Mode (not using palette)
+ * - supporting 16/24/32bit RGB/TFT raster Mode (not using palette)
* - sets up LCD controller as in 'am335x_lcdpanel' struct given
* - starts output DMA from gd->fb_base buffer
*
/* LCD Raster Ctrl Register */
#define LCD_TFT_24BPP_MODE (1 << 25)
#define LCD_TFT_24BPP_UNPACK (1 << 26)
-#define LCD_PALMODE_RAWDATA (0x10 << 20)
+#define LCD_PALMODE_RAWDATA (0x02 << 20)
#define LCD_TFT_MODE (0x01 << 7)
#define LCD_RASTER_ENABLE (0x01 << 0)
int am335xfb_init(struct am335x_lcdpanel *panel)
{
- if (0 == gd->fb_base) {
+ u32 raster_ctrl = 0;
+
+ if (gd->fb_base == 0) {
printf("ERROR: no valid fb_base stored in GLOBAL_DATA_PTR!\n");
return -1;
}
- if (0 == panel) {
+ if (panel == NULL) {
printf("ERROR: missing ptr to am335x_lcdpanel!\n");
return -1;
}
+ /* We can already set the bits for the raster_ctrl in this check */
+ switch (panel->bpp) {
+ case 16:
+ break;
+ case 32:
+ raster_ctrl |= LCD_TFT_24BPP_UNPACK;
+ /* fallthrough */
+ case 24:
+ raster_ctrl |= LCD_TFT_24BPP_MODE;
+ break;
+ default:
+ pr_err("am335x-fb: invalid bpp value: %d\n", panel->bpp);
+ return -1;
+ }
+
debug("setting up LCD-Controller for %dx%dx%d (hfp=%d,hbp=%d,hsw=%d / ",
panel->hactive, panel->vactive, panel->bpp,
panel->hfp, panel->hbp, panel->hsw);
/* palette default entry */
memset((void *)gd->fb_base, 0, 0x20);
*(unsigned int *)gd->fb_base = 0x4000;
+ /* point fb behind palette */
+ gd->fb_base += 0x20;
/* turn ON display through powercontrol function if accessible */
- if (0 != panel->panel_power_ctrl)
+ if (panel->panel_power_ctrl != NULL)
panel->panel_power_ctrl(1);
debug("am335x-fb: wait for stable power ...\n");
lcdhw->raster_ctrl = 0;
lcdhw->ctrl = LCD_CLK_DIVISOR(panel->pxl_clk_div) | LCD_RASTER_MODE;
lcdhw->lcddma_fb0_base = gd->fb_base;
- lcdhw->lcddma_fb0_ceiling = gd->fb_base + FBSIZE(panel) + 0x20;
+ lcdhw->lcddma_fb0_ceiling = gd->fb_base + FBSIZE(panel);
lcdhw->lcddma_fb1_base = gd->fb_base;
- lcdhw->lcddma_fb1_ceiling = gd->fb_base + FBSIZE(panel) + 0x20;
+ lcdhw->lcddma_fb1_ceiling = gd->fb_base + FBSIZE(panel);
lcdhw->lcddma_ctrl = LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16);
lcdhw->raster_timing0 = LCD_HORLSB(panel->hactive) |
LCD_HBPMSB(panel->hbp) |
LCD_HFPMSB(panel->hfp) |
0x0000FF00; /* clk cycles for ac-bias */
- lcdhw->raster_ctrl = LCD_TFT_24BPP_MODE |
- LCD_TFT_24BPP_UNPACK |
+ lcdhw->raster_ctrl = raster_ctrl |
LCD_PALMODE_RAWDATA |
LCD_TFT_MODE |
LCD_RASTER_ENABLE;
- gd->fb_base += 0x20; /* point fb behind palette */
-
debug("am335x-fb: waiting picture to be stable.\n.");
mdelay(panel->pon_delay);