* logo can be placed in the upper left corner and additional board
* information strings (that normally goes to serial port) can be drawn.
*
- * The console driver can use the standard PC keyboard interface (i8042)
- * for character input. Character output goes to a memory mapped video
+ * The console driver can use a keyboard interface for character input
+ * but this is deprecated. Only rk51 uses it.
+ *
+ * Character output goes to a memory-mapped video
* framebuffer with little or big-endian organisation.
* With environment setting 'console=serial' the console i/o can be
* forced to serial port.
* VIDEO_DATA_FORMAT - graphical data format GDF
* VIDEO_FB_ADRS - start of video memory
*
- * CONFIG_I8042_KBD - AT Keyboard driver for i8042
* VIDEO_KBD_INIT_FCT - init function for keyboard
* VIDEO_TSTC_FCT - keyboard_tstc function
* VIDEO_GETC_FCT - keyboard_getc function
*
- * CONFIG_CONSOLE_CURSOR - on/off drawing cursor is done with
- * delay loop in VIDEO_TSTC_FCT (i8042)
- *
- * CONFIG_SYS_CONSOLE_BLINK_COUNT - value for delay loop - blink rate
- * CONFIG_CONSOLE_TIME - display time/date in upper right
- * corner, needs CONFIG_CMD_DATE and
- * CONFIG_CONSOLE_CURSOR
* CONFIG_VIDEO_LOGO - display Linux Logo in upper left corner.
* Use CONFIG_SPLASH_SCREEN_ALIGN with
* environment variable "splashpos" to place
#define VIDEO_HW_BITBLT
#endif
-#ifdef CONFIG_VIDEO_MXS
+#if defined(CONFIG_VIDEO_MXS) || defined(CONFIG_VIDEO_S3C)
#define VIDEO_FB_16BPP_WORD_SWAP
#endif
#define VIDEO_DATA_FORMAT (pGD->gdfIndex)
#define VIDEO_FB_ADRS (pGD->frameAdrs)
-/*
- * Console device defines with i8042 keyboard controller
- * Any other keyboard controller must change this section
- */
-
-#ifdef CONFIG_I8042_KBD
-#include <i8042.h>
-
-#define VIDEO_KBD_INIT_FCT i8042_kbd_init()
-#define VIDEO_TSTC_FCT i8042_tstc
-#define VIDEO_GETC_FCT i8042_getc
-#endif
-
/*
* Console device
*/
/*
* Cursor definition:
- * CONFIG_CONSOLE_CURSOR: Uses a timer function (see drivers/input/i8042.c)
- * to let the cursor blink. Uses the macros
- * CURSOR_OFF and CURSOR_ON.
* CONFIG_VIDEO_SW_CURSOR: Draws a cursor after the last character. No
* blinking is provided. Uses the macros CURSOR_SET
* and CURSOR_OFF.
* must disable the hardware register of the graphic
* chip. Otherwise a blinking field is displayed
*/
-#if !defined(CONFIG_CONSOLE_CURSOR) && \
- !defined(CONFIG_VIDEO_SW_CURSOR) && \
- !defined(CONFIG_VIDEO_HW_CURSOR)
+#if !defined(CONFIG_VIDEO_SW_CURSOR) && !defined(CONFIG_VIDEO_HW_CURSOR)
/* no Cursor defined */
#define CURSOR_ON
#define CURSOR_OFF
#define CURSOR_SET
#endif
-#if defined(CONFIG_CONSOLE_CURSOR) || defined(CONFIG_VIDEO_SW_CURSOR)
-#if defined(CURSOR_ON) || \
- (defined(CONFIG_CONSOLE_CURSOR) && defined(CONFIG_VIDEO_SW_CURSOR))
-#error only one of CONFIG_CONSOLE_CURSOR, CONFIG_VIDEO_SW_CURSOR, \
- or CONFIG_VIDEO_HW_CURSOR can be defined
+#if defined(CONFIG_VIDEO_SW_CURSOR)
+#if defined(CONFIG_VIDEO_HW_CURSOR)
+#error only one of CONFIG_VIDEO_SW_CURSOR or CONFIG_VIDEO_HW_CURSOR can be \
+ defined
#endif
void console_cursor(int state);
#define CURSOR_ON console_cursor(1)
#define CURSOR_OFF console_cursor(0)
#define CURSOR_SET video_set_cursor()
-#endif /* CONFIG_CONSOLE_CURSOR || CONFIG_VIDEO_SW_CURSOR */
-
-#ifdef CONFIG_CONSOLE_CURSOR
-#ifndef CONFIG_CONSOLE_TIME
-#error CONFIG_CONSOLE_CURSOR must be defined for CONFIG_CONSOLE_TIME
-#endif
-#ifndef CONFIG_I8042_KBD
-#warning Cursor drawing on/off needs timer function s.a. drivers/input/i8042.c
-#endif
-#endif /* CONFIG_CONSOLE_CURSOR */
-
+#endif /* CONFIG_VIDEO_SW_CURSOR */
#ifdef CONFIG_VIDEO_HW_CURSOR
#ifdef CURSOR_ON
-#error only one of CONFIG_CONSOLE_CURSOR, CONFIG_VIDEO_SW_CURSOR, \
- or CONFIG_VIDEO_HW_CURSOR can be defined
+#error only one of CONFIG_VIDEO_SW_CURSOR or CONFIG_VIDEO_HW_CURSOR can be \
+ defined
#endif
#define CURSOR_ON
#define CURSOR_OFF
video_drawchars(xx, yy + video_logo_height, &c, 1);
}
-#if defined(CONFIG_CONSOLE_CURSOR) || defined(CONFIG_VIDEO_SW_CURSOR)
+#if defined(CONFIG_VIDEO_SW_CURSOR)
static void video_set_cursor(void)
{
if (cursor_state)
void console_cursor(int state)
{
-#ifdef CONFIG_CONSOLE_TIME
- struct rtc_time tm;
- char info[16];
-
- /* time update only if cursor is on (faster scroll) */
- if (state) {
- rtc_get(&tm);
-
- sprintf(info, " %02d:%02d:%02d ", tm.tm_hour, tm.tm_min,
- tm.tm_sec);
- video_drawstring(VIDEO_VISIBLE_COLS - 10 * VIDEO_FONT_WIDTH,
- VIDEO_INFO_Y, (uchar *) info);
-
- sprintf(info, "%02d.%02d.%04d", tm.tm_mday, tm.tm_mon,
- tm.tm_year);
- video_drawstring(VIDEO_VISIBLE_COLS - 10 * VIDEO_FONT_WIDTH,
- VIDEO_INFO_Y + 1 * VIDEO_FONT_HEIGHT,
- (uchar *) info);
- }
-#endif
-
if (cursor_state != state) {
if (cursor_state) {
/* turn off the cursor */
/* Init vga device */
memset(&console_dev, 0, sizeof(console_dev));
strcpy(console_dev.name, "vga");
- console_dev.ext = DEV_EXT_VIDEO; /* Video extensions */
console_dev.flags = DEV_FLAGS_OUTPUT;
console_dev.putc = video_putc; /* 'putc' function */
console_dev.puts = video_puts; /* 'puts' function */
projects / u-boot / blobdiff