dm: panel: Add a panel uclass

[u-boot] / drivers / video / exynos_dp.c

diff --git a/drivers/video/exynos_dp.c b/drivers/video/exynos_dp.c
index 5b6fc140e0ef78bd6856dc0ea319496721c5bfdd..0d5d090d0ee79db5c3e5d26bc79d760a3f071eff 100644 (file)
--- a/drivers/video/exynos_dp.c
+++ b/drivers/video/exynos_dp.c
@@ -207,7 +207,7 @@ static unsigned int exynos_dp_handle_edid(struct edp_device_info *edp_info)
                return -EINVAL;
        }
 
-       /*Refer VESA Display Port Stnadard Ver1.1a Page 120 */
+       /* Refer VESA Display Port Standard Ver1.1a Page 120 */
        if (edp_info->dpcd_rev == DP_DPCD_REV_11) {
                temp = buf[DPCD_MAX_LANE_COUNT] & 0x1f;
                if (buf[DPCD_MAX_LANE_COUNT] & 0x80)
@@ -270,7 +270,7 @@ static unsigned int exynos_dp_link_start(struct edp_device_info *edp_info)
                return ret;
        }
 
-       /* Set link rate and count as you want to establish*/
+       /* Set link rate and count as you want to establish */
        exynos_dp_set_link_bandwidth(edp_info->lane_bw);
        exynos_dp_set_lane_count(edp_info->lane_cnt);
 
@@ -322,7 +322,7 @@ static unsigned int exynos_dp_training_pattern_dis(void)
        ret = exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET,
                        DPCD_TRAINING_PATTERN_DISABLED);
        if (ret != EXYNOS_DP_SUCCESS) {
-               printf("DP requst_link_traninig_req failed\n");
+               printf("DP request_link_training_req failed\n");
                return -EAGAIN;
        }
 
@@ -412,7 +412,7 @@ static unsigned int exynos_dp_read_dpcd_adj_req(unsigned char lane_num,
        unsigned int dpcd_addr;
        unsigned char shift_val[DP_LANE_CNT_4] = {0, 4, 0, 4};
 
-       /*lane_num value is used as arry index, so this range 0 ~ 3 */
+       /* lane_num value is used as array index, so this range 0 ~ 3 */
        dpcd_addr = DPCD_ADJUST_REQUEST_LANE0_1 + (lane_num / 2);
 
        ret = exynos_dp_read_byte_from_dpcd(dpcd_addr, &buf);
@@ -433,7 +433,7 @@ static int exynos_dp_equalizer_err_link(struct edp_device_info *edp_info)
 
        ret = exynos_dp_training_pattern_dis();
        if (ret != EXYNOS_DP_SUCCESS) {
-               printf("DP training_patter_disable() failed\n");
+               printf("DP training_pattern_disable() failed\n");
                edp_info->lt_info.lt_status = DP_LT_FAIL;
        }
 
@@ -523,7 +523,7 @@ static unsigned int exynos_dp_process_clock_recovery(struct edp_device_info
                ret = exynos_dp_write_bytes_to_dpcd(
                                DPCD_TRAINING_PATTERN_SET, 5, buf);
                if (ret != EXYNOS_DP_SUCCESS) {
-                       printf("DP write traning pattern1 failed\n");
+                       printf("DP write training pattern1 failed\n");
                        edp_info->lt_info.lt_status = DP_LT_FAIL;
                        return ret;
                } else
@@ -567,7 +567,7 @@ static unsigned int exynos_dp_process_clock_recovery(struct edp_device_info
                ret = exynos_dp_write_bytes_to_dpcd(
                                DPCD_TRAINING_LANE0_SET, 4, lt_ctl_val);
                if (ret != EXYNOS_DP_SUCCESS) {
-                       printf("DP write traning pattern2 failed\n");
+                       printf("DP write training pattern2 failed\n");
                        edp_info->lt_info.lt_status = DP_LT_FAIL;
                        return ret;
                }
@@ -738,7 +738,7 @@ static unsigned int exynos_dp_set_link_train(struct edp_device_info *edp_info)
 
        ret = exynos_dp_sw_link_training(edp_info);
        if (ret != EXYNOS_DP_SUCCESS)
-               printf("DP dp_sw_link_traning() failed\n");
+               printf("DP dp_sw_link_training() failed\n");
 
        return ret;
 }