* (C) Copyright 2001-2002
* Wolfgang Denk, DENX Software Engineering -- wd@denx.de
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
/************************************************************************/
#include <common.h>
#include <command.h>
#include <watchdog.h>
-#include <version.h>
#include <stdarg.h>
#include <lcdvideo.h>
#include <linux/types.h>
#define CONFIG_LCD_INFO /* Display Logo, (C) and system info */
#endif
-#if defined(CONFIG_V37) || defined(CONFIG_EDT32F10)
-#undef CONFIG_LCD_LOGO
-#undef CONFIG_LCD_INFO
-#endif
-
/*----------------------------------------------------------------------*/
#ifdef CONFIG_KYOCERA_KCS057QV1AJ
/*
};
#endif /* CONFIG_OPTREX_BW */
-/*-----------------------------------------------------------------*/
-#ifdef CONFIG_EDT32F10
-/*
- * Emerging Display Technologies 320x240. Passive, monochrome, single scan.
- */
-#define LCD_BPP LCD_MONOCHROME
-#define LCD_DF 10
-
-vidinfo_t panel_info = {
- 320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW,
- LCD_BPP, 0, 0, 0, 0, 33, 0, 0, 0
-};
-#endif
-/*----------------------------------------------------------------------*/
-
-
-int lcd_line_length;
-
-/*
- * Frame buffer memory information
- */
-void *lcd_base; /* Start of framebuffer memory */
-void *lcd_console_address; /* Start of console buffer */
-
-short console_col;
-short console_row;
-
-/************************************************************************/
-
-void lcd_ctrl_init (void *lcdbase);
-void lcd_enable (void);
-#if LCD_BPP == LCD_COLOR8
-void lcd_setcolreg (ushort regno,
- ushort red, ushort green, ushort blue);
-#endif
-#if LCD_BPP == LCD_MONOCHROME
-void lcd_initcolregs (void);
-#endif
-
-#if defined(CONFIG_RBC823)
-void lcd_disable (void);
-#endif
-
-/************************************************************************/
-
/************************************************************************/
/* ----------------- chipset specific functions ----------------------- */
/************************************************************************/
* the controller.
*/
-#ifdef CONFIG_RPXLITE
- /* This is special for RPXlite_DW Software Development Platform **[Sam]** */
- panel_info.vl_dp = CONFIG_SYS_LOW;
-#endif
-
lccrtmp = LCDBIT (LCCR_BNUM_BIT,
(((panel_info.vl_row * panel_info.vl_col) * (1 << LCD_BPP)) / 128));
/* Initialize LCD controller bus priorities.
*/
-#ifdef CONFIG_RBC823
- immr->im_siu_conf.sc_sdcr = (immr->im_siu_conf.sc_sdcr & ~0x0f) | 1; /* RAID = 01, LAID = 00 */
-#else
immr->im_siu_conf.sc_sdcr &= ~0x0f; /* RAID = LAID = 0 */
/* set SHFT/CLOCK division factor 4
immr->im_clkrst.car_sccr &= ~0x1F;
immr->im_clkrst.car_sccr |= LCD_DF; /* was 8 */
-#endif /* CONFIG_RBC823 */
-
-#if defined(CONFIG_RBC823)
- /* Enable LCD on port D.
- */
- immr->im_ioport.iop_pddat &= 0x0300;
- immr->im_ioport.iop_pdpar |= 0x1CFF;
- immr->im_ioport.iop_pddir |= 0x1CFF;
-
- /* Configure LCD_ON, VEE_ON, CCFL_ON on port B.
- */
- immr->im_cpm.cp_pbdat &= ~0x00005001;
- immr->im_cpm.cp_pbpar &= ~0x00005001;
- immr->im_cpm.cp_pbdir |= 0x00005001;
-#elif !defined(CONFIG_EDT32F10)
/* Enable LCD on port D.
*/
immr->im_ioport.iop_pdpar |= 0x1FFF;
*/
immr->im_cpm.cp_pbpar |= 0x00005001;
immr->im_cpm.cp_pbdir |= 0x00005001;
-#else
- /* Enable LCD on port D.
- */
- immr->im_ioport.iop_pdpar |= 0x1DFF;
- immr->im_ioport.iop_pdpar &= ~0x0200;
- immr->im_ioport.iop_pddir |= 0x1FFF;
- immr->im_ioport.iop_pddat |= 0x0200;
-#endif
/* Load the physical address of the linear frame buffer
* into the LCD controller.
* BIG NOTE: This has to be modified to load A and B depending
* upon the split mode of the LCD.
*/
- lcdp->lcd_lcfaa = (ulong)lcd_base;
- lcdp->lcd_lcfba = (ulong)lcd_base;
+ lcdp->lcd_lcfaa = (ulong)lcdbase;
+ lcdp->lcd_lcfba = (ulong)lcdbase;
/* MORE HACKS...This must be updated according to 823 manual
* for different panels.
/*----------------------------------------------------------------------*/
-#ifdef NOT_USED_SO_FAR
-static void
-lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(immr->im_cpm);
- unsigned short colreg, *cmap_ptr;
-
- cmap_ptr = (unsigned short *)&cp->lcd_cmap[regno * 2];
-
- colreg = *cmap_ptr;
-#ifdef CONFIG_SYS_INVERT_COLORS
- colreg ^= 0x0FFF;
-#endif
-
- *red = (colreg >> 8) & 0x0F;
- *green = (colreg >> 4) & 0x0F;
- *blue = colreg & 0x0F;
-}
-#endif /* NOT_USED_SO_FAR */
-
-/*----------------------------------------------------------------------*/
-
#if LCD_BPP == LCD_COLOR8
void
lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
colreg = ((red & 0x0F) << 8) |
((green & 0x0F) << 4) |
(blue & 0x0F) ;
-#ifdef CONFIG_SYS_INVERT_COLORS
- colreg ^= 0x0FFF;
-#endif
+
*cmap_ptr = colreg;
debug ("setcolreg: reg %2d @ %p: R=%02X G=%02X B=%02X => %02X%02X\n",
/*----------------------------------------------------------------------*/
-#if LCD_BPP == LCD_MONOCHROME
-static
-void lcd_initcolregs (void)
+ushort *configuration_get_cmap(void)
{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(immr->im_cpm);
- ushort regno;
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ cpm8xx_t *cp = &(immr->im_cpm);
+ return (ushort *)&(cp->lcd_cmap[255 * sizeof(ushort)]);
+}
- for (regno = 0; regno < 16; regno++) {
- cp->lcd_cmap[regno * 2] = 0;
- cp->lcd_cmap[(regno * 2) + 1] = regno & 0x0f;
- }
+#if defined(CONFIG_MPC823)
+void fb_put_byte(uchar **fb, uchar **from)
+{
+ *(*fb)++ = (255 - *(*from)++);
}
#endif
-/*----------------------------------------------------------------------*/
+#ifdef CONFIG_LCD_LOGO
+#include <bmp_logo.h>
+void lcd_logo_set_cmap(void)
+{
+ int i;
+ ushort *cmap;
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ cpm8xx_t *cp = &(immr->im_cpm);
+ cmap = (ushort *)&(cp->lcd_cmap[BMP_LOGO_OFFSET * sizeof(ushort)]);
+
+ for (i = 0; i < BMP_LOGO_COLORS; ++i)
+ *cmap++ = bmp_logo_palette[i];
+}
+#endif
void lcd_enable (void)
{
volatile lcd823_t *lcdp = &immr->im_lcd;
/* Enable the LCD panel */
-#ifndef CONFIG_RBC823
immr->im_siu_conf.sc_sdcr |= (1 << (31 - 25)); /* LAM = 1 */
-#endif
lcdp->lcd_lccr |= LCCR_PON;
-
-#ifdef CONFIG_V37
- /* Turn on display backlight */
- immr->im_cpm.cp_pbpar |= 0x00008000;
- immr->im_cpm.cp_pbdir |= 0x00008000;
-#elif defined(CONFIG_RBC823)
- /* Turn on display backlight */
- immr->im_cpm.cp_pbdat |= 0x00004000;
-#endif
-
-#if defined(CONFIG_LWMON)
- { uchar c = pic_read (0x60);
-#if defined(CONFIG_LCD) && defined(CONFIG_LWMON) && (CONFIG_POST & CONFIG_SYS_POST_SYSMON)
- /* Enable LCD later in sysmon test, only if temperature is OK */
-#else
- c |= 0x07; /* Power on CCFL, Enable CCFL, Chip Enable LCD */
-#endif
- pic_write (0x60, c);
- }
-#endif /* CONFIG_LWMON */
-
-#if defined(CONFIG_R360MPI)
- {
- extern void r360_i2c_lcd_write (uchar data0, uchar data1);
- unsigned long bgi, ctr;
- char *p;
-
- if ((p = getenv("lcdbgi")) != NULL) {
- bgi = simple_strtoul (p, 0, 10) & 0xFFF;
- } else {
- bgi = 0xFFF;
- }
-
- if ((p = getenv("lcdctr")) != NULL) {
- ctr = simple_strtoul (p, 0, 10) & 0xFFF;
- } else {
- ctr=0x7FF;
- }
-
- r360_i2c_lcd_write(0x10, 0x01);
- r360_i2c_lcd_write(0x20, 0x01);
- r360_i2c_lcd_write(0x30 | ((bgi>>8) & 0xF), bgi & 0xFF);
- r360_i2c_lcd_write(0x40 | ((ctr>>8) & 0xF), ctr & 0xFF);
- }
-#endif /* CONFIG_R360MPI */
-#ifdef CONFIG_RBC823
- udelay(200000); /* wait 200ms */
- /* Turn VEE_ON first */
- immr->im_cpm.cp_pbdat |= 0x00000001;
- udelay(200000); /* wait 200ms */
- /* Now turn on LCD_ON */
- immr->im_cpm.cp_pbdat |= 0x00001000;
-#endif
-#ifdef CONFIG_RRVISION
- debug ("PC4->Output(1): enable LVDS\n");
- debug ("PC5->Output(0): disable PAL clock\n");
- immr->im_ioport.iop_pddir |= 0x1000;
- immr->im_ioport.iop_pcpar &= ~(0x0C00);
- immr->im_ioport.iop_pcdir |= 0x0C00 ;
- immr->im_ioport.iop_pcdat |= 0x0800 ;
- immr->im_ioport.iop_pcdat &= ~(0x0400);
- debug ("PDPAR=0x%04X PDDIR=0x%04X PDDAT=0x%04X\n",
- immr->im_ioport.iop_pdpar,
- immr->im_ioport.iop_pddir,
- immr->im_ioport.iop_pddat);
- debug ("PCPAR=0x%04X PCDIR=0x%04X PCDAT=0x%04X\n",
- immr->im_ioport.iop_pcpar,
- immr->im_ioport.iop_pcdir,
- immr->im_ioport.iop_pcdat);
-#endif
-}
-
-/*----------------------------------------------------------------------*/
-
-#if defined (CONFIG_RBC823)
-void lcd_disable (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile lcd823_t *lcdp = &immr->im_lcd;
-
-#if defined(CONFIG_LWMON)
- { uchar c = pic_read (0x60);
- c &= ~0x07; /* Power off CCFL, Disable CCFL, Chip Disable LCD */
- pic_write (0x60, c);
- }
-#elif defined(CONFIG_R360MPI)
- {
- extern void r360_i2c_lcd_write (uchar data0, uchar data1);
-
- r360_i2c_lcd_write(0x10, 0x00);
- r360_i2c_lcd_write(0x20, 0x00);
- r360_i2c_lcd_write(0x30, 0x00);
- r360_i2c_lcd_write(0x40, 0x00);
- }
-#endif /* CONFIG_LWMON */
- /* Disable the LCD panel */
- lcdp->lcd_lccr &= ~LCCR_PON;
-#ifdef CONFIG_RBC823
- /* Turn off display backlight, VEE and LCD_ON */
- immr->im_cpm.cp_pbdat &= ~0x00005001;
-#else
- immr->im_siu_conf.sc_sdcr &= ~(1 << (31 - 25)); /* LAM = 0 */
-#endif /* CONFIG_RBC823 */
}
-#endif /* NOT_USED_SO_FAR || CONFIG_RBC823 */
-
/************************************************************************/
projects / u-boot / blobdiff