# This Makefile builds the internal U-Boot fdt if CONFIG_OF_CONTROL is
# enabled. See doc/README.fdt-control for more details.
+DEVICE_TREE ?= $(CONFIG_DEFAULT_DEVICE_TREE:"%"=%)
ifeq ($(DEVICE_TREE),)
-$(if $(CONFIG_DEFAULT_DEVICE_TREE),,\
-$(error Please define CONFIG_DEFAULT_DEVICE_TREE in your board header file))
-DEVICE_TREE = $(CONFIG_DEFAULT_DEVICE_TREE:"%"=%)
+DEVICE_TREE := unset
endif
-DTS_INCDIRS = $(SRCTREE)/board/$(VENDOR)/$(BOARD)/dts
-DTS_INCDIRS += $(SRCTREE)/board/$(VENDOR)/dts
-DTS_INCDIRS += $(SRCTREE)/arch/$(ARCH)/dts
-
-DTS_CPPFLAGS := -x assembler-with-cpp -undef -D__DTS__ \
- -nostdinc $(addprefix -I,$(DTS_INCDIRS))
-
-DTC_FLAGS := -R 4 -p 0x1000 \
- $(addprefix -i ,$(DTS_INCDIRS))
-
-# Use a constant name for this so we can access it from C code.
-# objcopy doesn't seem to allow us to set the symbol name independently of
-# the filename.
-DT_BIN := $(obj)/dt.dtb
-
-$(DT_BIN): $(TOPDIR)/board/$(VENDOR)/dts/$(DEVICE_TREE).dts
- $(CPP) $(DTS_CPPFLAGS) $< -o $(DT_BIN).dts.tmp
- $(DTC) $(DTC_FLAGS) -O dtb -o ${DT_BIN} $(DT_BIN).dts.tmp
-
-process_lds = \
- $(1) | sed -r -n 's/^OUTPUT_$(2)[ ("]*([^")]*).*/\1/p'
-
-# Run the compiler and get the link script from the linker
-GET_LDS = $(CC) $(c_flags) $(ld_flags) -Wl,--verbose 2>&1
-
-$(obj)/dt.o: $(DT_BIN)
- # We want the output format and arch.
- # We also hope to win a prize for ugliest Makefile / shell interaction
- # We look in the LDSCRIPT first.
- # Then try the linker which should give us the answer.
- # Then check it worked.
- [ -n "$(LDSCRIPT)" ] && \
- oformat=`$(call process_lds,cat $(LDSCRIPT),FORMAT)` && \
- oarch=`$(call process_lds,cat $(LDSCRIPT),ARCH)` ;\
- \
- [ -z $${oformat} ] && \
- oformat=`$(call process_lds,$(GET_LDS),FORMAT)` ;\
- [ -z $${oarch} ] && \
- oarch=`$(call process_lds,$(GET_LDS),ARCH)` ;\
- \
- [ -z $${oformat} ] && \
- echo "Cannot read OUTPUT_FORMAT from lds file $(LDSCRIPT)" && \
- exit 1 || true ;\
- [ -z $${oarch} ] && \
- echo "Cannot read OUTPUT_ARCH from lds file $(LDSCRIPT)" && \
- exit 1 || true ;\
- \
- cd $(dir ${DT_BIN}) && \
- $(OBJCOPY) -I binary -O $${oformat} -B $${oarch} \
- $(notdir ${DT_BIN}) $(notdir $@)
- rm $(DT_BIN)
-
-obj-$(CONFIG_OF_EMBED) := dt.o
-
-binary: $(DT_BIN)
+ARCH_PATH := arch/$(ARCH)/dts
+dtb_depends := arch-dtbs
+
+ifneq ($(EXT_DTB),)
+DTB := $(EXT_DTB)
+else
+DTB := $(ARCH_PATH)/$(DEVICE_TREE).dtb
+dtb_depends += $(DTB:.dtb=.dts)
+endif
+
+# Pass the original device tree file through fdtgrep twice. The first pass
+# removes any unwanted nodes (i.e. those which don't have the
+# 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second
+# pass removes various unused properties from the remaining nodes.
+# The output is typically a much smaller device tree file.
+ifeq ($(CONFIG_TPL_BUILD),y)
+fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-tpl
+else
+fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-spl
+endif
+quiet_cmd_fdtgrep = FDTGREP $@
+ cmd_fdtgrep = $(objtree)/tools/fdtgrep $(fdtgrep_props) -RT $< \
+ -n /chosen -n /config -O dtb | \
+ $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
+ $(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS)))
+
+$(obj)/dt-spl.dtb: $(DTB) $(objtree)/tools/fdtgrep FORCE
+ $(call if_changed,fdtgrep)
+
+$(obj)/dt.dtb: $(DTB) FORCE
+ $(call if_changed,shipped)
+
+targets += dt.dtb dt-spl.dtb
+
+$(DTB): $(dtb_depends)
+ifeq ($(EXT_DTB),)
+ $(Q)$(MAKE) $(build)=$(ARCH_PATH) $@
+endif
+ $(Q)test -e $@ || ( \
+ echo >&2; \
+ echo >&2 "Device Tree Source is not correctly specified."; \
+ echo >&2 "Please define 'CONFIG_DEFAULT_DEVICE_TREE'"; \
+ echo >&2 "or build with 'DEVICE_TREE=<device_tree>' argument"; \
+ echo >&2; \
+ /bin/false)
+
+arch-dtbs:
+ $(Q)$(MAKE) $(build)=$(ARCH_PATH) dtbs
+
+.SECONDARY: $(obj)/dt.dtb.S $(obj)/dt-spl.dtb.S
+
+
+ifeq ($(CONFIG_SPL_BUILD),y)
+obj-$(CONFIG_OF_EMBED) := dt-spl.dtb.o
+# support "out-of-tree" build for dtb-spl
+$(obj)/dt-spl.dtb.o: $(obj)/dt-spl.dtb.S FORCE
+ $(call if_changed_dep,as_o_S)
+else
+obj-$(CONFIG_OF_EMBED) := dt.dtb.o
+endif
+
+dtbs: $(obj)/dt.dtb $(obj)/dt-spl.dtb
+ @:
+
+clean-files := dt.dtb.S dt-spl.dtb.S
+
+# Let clean descend into dts directories
+subdir- += ../arch/arm/dts ../arch/microblaze/dts ../arch/mips/dts ../arch/sandbox/dts ../arch/x86/dts