+++ /dev/null
-# i3 config file (v4)
-#
-# Please see http://i3wm.org/docs/userguide.html for a complete reference!
-#
-# This config file uses keycodes (bindsym) and was written for the QWERTY
-# layout.
-#
-# To get a config file with the same key positions, but for your current
-# layout, use the i3-config-wizard
-#
-
-# Font for window titles. Will also be used by the bar unless a different font
-# is used in the bar {} block below.
-font pango:monospace 8
-
-# This font is widely installed, provides lots of unicode glyphs, right-to-left
-# text rendering and scalability on retina/hidpi displays (thanks to pango).
-#font pango:DejaVu Sans Mono 8
-
-# Before i3 v4.8, we used to recommend this one as the default:
-# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
-# The font above is very space-efficient, that is, it looks good, sharp and
-# clear in small sizes. However, its unicode glyph coverage is limited, the old
-# X core fonts rendering does not support right-to-left and this being a bitmap
-# font, it doesn’t scale on retina/hidpi displays.
-
-# use these keys for focus, movement, and resize directions when reaching for
-# the arrows is not convenient
-set $up l
-set $down k
-set $left j
-set $right semicolon
-
-# use Mouse+Mod1 to drag floating windows to their wanted position
-floating_modifier Mod1
-
-# start a terminal
-bindsym Mod1+Return exec i3-sensible-terminal
-
-# kill focused window
-bindsym Mod1+Shift+q kill
-
-# start dmenu (a program launcher)
-bindsym Mod1+d exec dmenu_run
-# There also is the (new) i3-dmenu-desktop which only displays applications
-# shipping a .desktop file. It is a wrapper around dmenu, so you need that
-# installed.
-# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop
-
-# change focus
-bindsym Mod1+$left focus left
-bindsym Mod1+$down focus down
-bindsym Mod1+$up focus up
-bindsym Mod1+$right focus right
-
-# alternatively, you can use the cursor keys:
-bindsym Mod1+Left focus left
-bindsym Mod1+Down focus down
-bindsym Mod1+Up focus up
-bindsym Mod1+Right focus right
-
-# move focused window
-bindsym Mod1+Shift+$left move left
-bindsym Mod1+Shift+$down move down
-bindsym Mod1+Shift+$up move up
-bindsym Mod1+Shift+$right move right
-
-# alternatively, you can use the cursor keys:
-bindsym Mod1+Shift+Left move left
-bindsym Mod1+Shift+Down move down
-bindsym Mod1+Shift+Up move up
-bindsym Mod1+Shift+Right move right
-
-# split in horizontal orientation
-bindsym Mod1+h split h
-
-# split in vertical orientation
-bindsym Mod1+v split v
-
-# enter fullscreen mode for the focused container
-bindsym Mod1+f fullscreen toggle
-
-# change container layout (stacked, tabbed, toggle split)
-bindsym Mod1+s layout stacking
-bindsym Mod1+w layout tabbed
-bindsym Mod1+e layout toggle split
-
-# toggle tiling / floating
-bindsym Mod1+Shift+space floating toggle
-
-# change focus between tiling / floating windows
-bindsym Mod1+space focus mode_toggle
-
-# focus the parent container
-bindsym Mod1+a focus parent
-
-# focus the child container
-#bindsym Mod1+d focus child
-
-# move the currently focused window to the scratchpad
-bindsym Mod1+Shift+minus move scratchpad
-
-# Show the next scratchpad window or hide the focused scratchpad window.
-# If there are multiple scratchpad windows, this command cycles through them.
-bindsym Mod1+minus scratchpad show
-
-# switch to workspace
-bindsym Mod1+1 workspace 1
-bindsym Mod1+2 workspace 2
-bindsym Mod1+3 workspace 3
-bindsym Mod1+4 workspace 4
-bindsym Mod1+5 workspace 5
-bindsym Mod1+6 workspace 6
-bindsym Mod1+7 workspace 7
-bindsym Mod1+8 workspace 8
-bindsym Mod1+9 workspace 9
-bindsym Mod1+0 workspace 10
-
-# move focused container to workspace
-bindsym Mod1+Shift+1 move container to workspace 1
-bindsym Mod1+Shift+2 move container to workspace 2
-bindsym Mod1+Shift+3 move container to workspace 3
-bindsym Mod1+Shift+4 move container to workspace 4
-bindsym Mod1+Shift+5 move container to workspace 5
-bindsym Mod1+Shift+6 move container to workspace 6
-bindsym Mod1+Shift+7 move container to workspace 7
-bindsym Mod1+Shift+8 move container to workspace 8
-bindsym Mod1+Shift+9 move container to workspace 9
-bindsym Mod1+Shift+0 move container to workspace 10
-
-# reload the configuration file
-bindsym Mod1+Shift+c reload
-# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
-bindsym Mod1+Shift+r restart
-# exit i3 (logs you out of your X session)
-bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
-
-# resize window (you can also use the mouse for that)
-mode "resize" {
- # These bindings trigger as soon as you enter the resize mode
-
- # Pressing left will shrink the window’s width.
- # Pressing right will grow the window’s width.
- # Pressing up will shrink the window’s height.
- # Pressing down will grow the window’s height.
- bindsym $left resize shrink width 10 px or 10 ppt
- bindsym $down resize grow height 10 px or 10 ppt
- bindsym $up resize shrink height 10 px or 10 ppt
- bindsym $right resize grow width 10 px or 10 ppt
-
- # same bindings, but for the arrow keys
- bindsym Left resize shrink width 10 px or 10 ppt
- bindsym Down resize grow height 10 px or 10 ppt
- bindsym Up resize shrink height 10 px or 10 ppt
- bindsym Right resize grow width 10 px or 10 ppt
-
- # back to normal: Enter or Escape
- bindsym Return mode "default"
- bindsym Escape mode "default"
-}
-
-bindsym Mod1+r mode "resize"
-
-# Start i3bar to display a workspace bar (plus the system information i3status
-# finds out, if available)
-bar {
- status_command i3status
-}
-
-#######################################################################
-# automatically start i3-config-wizard to offer the user to create a
-# keysym-based config which used their favorite modifier (alt or windows)
-#
-# i3-config-wizard will not launch if there already is a config file
-# in ~/.i3/config.
-#
-# Please remove the following exec line:
-#######################################################################
-exec i3-config-wizard
projects / i3 / i3 / blobdiff