Merge branch 'master' of git://git.denx.de/u-boot-net

[u-boot] / include / configs / Alaska8220.h

diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index c08b2c39f8854a08f8b6b5260499b77c8afdca45..38b962f8232c8c6d61aa5175a84af8e5572103c1 100644 (file)
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -31,6 +31,8 @@
 #define CONFIG_MPC8220         1
 #define CONFIG_ALASKA8220      1       /* ... on Alaska board  */
 
+#define CONFIG_HIGH_BATS       1       /* High BATs supported */
+
 /* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
    determine the CPU speed. */
 #define CFG_MPC8220_CLKIN      30000000/* ... running at 30MHz */
@@ -39,12 +41,6 @@
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM          0x02    /* Software reboot      */
 
-#define CFG_CACHELINE_SIZE     32      /* For MPC8220 CPUs */
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT  5   /* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -70,31 +66,40 @@
 
 #define CONFIG_TIMESTAMP                       /* Print image info with timestamp */
 
+
 /*
- * Supported commands
+ * BOOTP options
  */
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                               CFG_CMD_BOOTD   | \
-                               CFG_CMD_CACHE   | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_DIAG    | \
-                               CFG_CMD_EEPROM  | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_NET     | \
-                               CFG_CMD_NFS     | \
-                               CFG_CMD_PCI     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_REGINFO | \
-                               CFG_CMD_SDRAM   | \
-                               CFG_CMD_SNTP    )
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
 
 #define CONFIG_NET_MULTI
 #define CONFIG_MII
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 /*
  * Autobooting
  */
@@ -282,7 +287,7 @@
  */
 #define CFG_LONGHELP                       /* undef to save memory     */
 #define CFG_PROMPT             "=> "       /* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024        /* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE             256         /* Console I/O Buffer Size  */
@@ -298,6 +303,11 @@
 
 #define CFG_HZ                 1000        /* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE     32      /* For MPC8220 CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT  5   /* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */