stv0991: enable default and misc command configs

[u-boot] / include / configs / B4860QDS.h

diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index 43c9df01bdeb9896b74234c49228937b77326777..9e8e319cf703a6b476f6c99021d49adbe2ba1529 100644 (file)
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -23,7 +23,6 @@
 #define CONFIG_RAMBOOT_TEXT_BASE       CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS    0xfffffffc
 #else
-#define CONFIG_SPL
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -83,6 +82,7 @@
 #define CONFIG_SYS_FSL_CPC             /* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC             CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC                 /* Enable IFC Support */
+#define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
 #define CONFIG_PCI                     /* Enable PCI/PCIE */
 #define CONFIG_PCIE1                   /* PCIE controler 1 */
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
@@ -228,6 +228,7 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /* EEPROM */
+#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM      0
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
@@ -712,8 +713,8 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_FMAN_ENET
-#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10
-#define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11
+#define CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR 0x10
+#define CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR 0x11
 
 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */
 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7      /*SLOT 1*/
@@ -730,6 +731,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
 #endif
 
+#define CONFIG_SYS_FSL_B4860QDS_XFI_ERR
+
 /*
  * Environment
  */
@@ -759,6 +762,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_NET
 #endif
 
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
 /*
 * USB
 */
@@ -820,9 +829,16 @@ unsigned long get_board_ddr_clk(void);
 
 #define __USB_PHY_TYPE ulpi
 
+#ifdef CONFIG_PPC_B4860
+#define HWCONFIG       "hwconfig=fsl_ddr:ctlr_intlv=null,"     \
+                       "bank_intlv=cs0_cs1;"   \
+                       "en_cpc:cpc2;"
+#else
+#define        HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;"
+#endif
+
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
-       "hwconfig=fsl_ddr:ctlr_intlv=null,"             \
-       "bank_intlv=cs0_cs1;"                                   \
+       HWCONFIG                                                \
        "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
        "netdev=eth0\0"                                         \
        "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
@@ -906,4 +922,8 @@ unsigned long get_board_ddr_clk(void);
 
 #include <asm/fsl_secure_boot.h>
 
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_CMD_BLOB
+#endif
+
 #endif /* __CONFIG_H */