ARM: versatile: pass console setting to the kernel

[u-boot] / include / configs / BSC9131RDB.h

diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index b6a879058e4f0e67c593884946a72b7a5bbe1c38..584aba8d0e44bcc8ce5ba4016564cf7d50a7ac56 100644 (file)
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -29,7 +29,7 @@
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 
@@ -80,7 +80,7 @@
 #define CONFIG_SYS_MEMTEST_END         0x01ffffff
 
 /* DDR Setup */
-#define CONFIG_FSL_DDR3
+#define CONFIG_SYS_FSL_DDR3
 #undef CONFIG_SYS_DDR_RAW_TIMING
 #undef CONFIG_DDR_SPD
 #define CONFIG_SYS_SPD_BUS_NUM         0
@@ -181,18 +181,18 @@ extern unsigned long get_sdram_size(void);
                                | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 
 /* NAND Flash Timing Params */
-#define CONFIG_SYS_NAND_FTIM0          (FTIM0_NAND_TCCST(0x08)  \
-                                       | FTIM0_NAND_TWP(0x06)   \
-                                       | FTIM0_NAND_TWCHT(0x03) \
+#define CONFIG_SYS_NAND_FTIM0          (FTIM0_NAND_TCCST(0x03)  \
+                                       | FTIM0_NAND_TWP(0x05)   \
+                                       | FTIM0_NAND_TWCHT(0x02) \
                                        | FTIM0_NAND_TWH(0x04))
-#define CONFIG_SYS_NAND_FTIM1          (FTIM1_NAND_TADLE(0x18) \
-                                       | FTIM1_NAND_TWBE(0x23) \
-                                       | FTIM1_NAND_TRR(0x08)  \
+#define CONFIG_SYS_NAND_FTIM1          (FTIM1_NAND_TADLE(0x1C) \
+                                       | FTIM1_NAND_TWBE(0x1E) \
+                                       | FTIM1_NAND_TRR(0x07)  \
                                        | FTIM1_NAND_TRP(0x05))
 #define CONFIG_SYS_NAND_FTIM2          (FTIM2_NAND_TRAD(0x08)  \
                                        | FTIM2_NAND_TREH(0x04) \
-                                       | FTIM2_NAND_TWHRE(0x3f))
-#define CONFIG_SYS_NAND_FTIM3          FTIM3_NAND_TWW(0x22)
+                                       | FTIM2_NAND_TWHRE(0x11))
+#define CONFIG_SYS_NAND_FTIM3          FTIM3_NAND_TWW(0x04)
 
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
@@ -259,13 +259,11 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE     /* enable fit_format_{error,warning}() */
 
-#define CONFIG_FSL_I2C                 /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C                        /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C                 /* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED           400000 /* I2C speed and slave address*/
-#define CONFIG_SYS_I2C_OFFSET          0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       400000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
 
 /* I2C EEPROM */
 #define CONFIG_CMD_EEPROM
@@ -363,7 +361,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
@@ -374,7 +371,6 @@ extern unsigned long get_sdram_size(void);
                                                /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ          1000    /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -386,7 +382,6 @@ extern unsigned long get_sdram_size(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 #define CONFIG_USB_EHCI