include/configs: Use new CONFIG_CMD_* in various E* named board config files.

[u-boot] / include / configs / CRAYL1.h

diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index 1bd6899bff9f6bb2ecc6e726061b005bac2dcf5d..627c0c820149a69ae760fce7efb5d1d5b6ab7527 100644 (file)
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000, 2001
+ * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  * David Updegraff, Cray, Inc.  dave@cray.com: our 405 is walnut-lite..
  *
@@ -41,12 +41,12 @@
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
 #define CONFIG_MII                 1   /* MII PHY management */
 #define        CONFIG_PHY_ADDR         1       /* PHY address; handling of ENET */
-#define CONFIG_BOARD_PRE_INIT 1 /* early setup for 405gp */
+#define CONFIG_BOARD_EARLY_INIT_F 1    /* early setup for 405gp */
 #define CONFIG_MISC_INIT_R     1       /* so that a misc_init_r() is called */
 
 /* set PRAM to keep U-Boot out, mem= to keep linux out, and initrd_hi to
  * keep possible initrd ramdisk decompression out.  This is in k (1024 bytes)
- #define CONFIG_PRAM                   16 
+ #define CONFIG_PRAM                   16
  */
 #define        CONFIG_LOADADDR         0x100000        /* where TFTP images go */
 #undef CONFIG_BOOTARGS
@@ -56,10 +56,10 @@
 #define        CFG_AUTOLOAD            "no"
 #define CONFIG_BOOTCOMMAND     "dhcp"
 
-/* 
+/*
  * ..during experiments..
  #define CONFIG_SERVERIP         10.0.0.1
- #define CONFIG_ETHADDR          00:40:a6:80:14:5 
+ #define CONFIG_ETHADDR          00:40:a6:80:14:5
  */
 #define CONFIG_HARD_I2C         1              /* hardware support for i2c */
 #define CONFIG_SDRAM_BANK0             1
@@ -75,26 +75,30 @@
 #define CONFIG_AUTOSCRIPT              1
 
 
-#define CONFIG_COMMANDS         (\
-       CFG_CMD_BDI|\
-       CFG_CMD_IMI|\
-       CFG_CMD_FLASH|\
-       CFG_CMD_MEMORY|\
-       CFG_CMD_NET|\
-       CFG_CMD_ENV|\
-       CFG_CMD_CONSOLE|\
-       CFG_CMD_ASKENV|\
-       CFG_CMD_ECHO|\
-       CFG_CMD_IMMAP|\
-       CFG_CMD_REGINFO|\
-       CFG_CMD_DHCP|\
-       CFG_CMD_DATE|\
-       CFG_CMD_RUN|\
-       CFG_CMD_I2C|\
-       CFG_CMD_EEPROM|\
-       CFG_CMD_DIAG|\
-       CFG_CMD_AUTOSCRIPT|\
-       CFG_CMD_SETGETDCR)
+/*
+ * Command line configuration.
+ */
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_SETGETDCR
+
 
 /*
  * optional BOOTP / DHCP fields
@@ -108,13 +112,13 @@
        CONFIG_BOOTP_BOOTFILESIZE|\
        CONFIG_BOOTP_BOOTPATH)
 
-/* 
+/*
  * how many time to fail & restart a net-TFTP before giving up & resetting
  * the board hoping that a reset of net interface might help..
  */
 #define CONFIG_NET_RESET 5
 
-/* 
+/*
  * bauds.  Just to make it compile; in our case, I read the base_baud
  * from the DCR anyway, so its kinda-tied to the above ref. clock which in turn
  * drives the system clock.
@@ -123,9 +127,6 @@
 #define CFG_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 /*
  * Miscellaneous configurable options
  */
@@ -168,7 +169,7 @@
 #define CFG_FLASH_WRITE_TOUT 500       /* Timeout for Flash Write (in ms)      */
 
 /* BEG ENVIRONNEMENT FLASH: needs to be a whole FlashSector  */
-#define CFG_ENV_OFFSET         0x3c8000 
+#define CFG_ENV_OFFSET         0x3c8000
 #define CFG_ENV_IS_IN_FLASH    1       /* use FLASH for environment vars */
 #define        CFG_ENV_SIZE            0x1000   /* Total Size of Environment area      */
 #define CFG_ENV_SECT_SIZE      0x10000  /* see README - env sector total size  */
@@ -184,15 +185,15 @@
 #define CFG_STACK_USAGE                0x10000 /* Reserve 64k for the stack usage */
 #define CFG_MALLOC_LEN         (128 << 10)     /* 128k for malloc space */
 #define CFG_MEM_END_USAGE      ( CFG_MONITOR_LEN \
-                                + CFG_MALLOC_LEN \
-                                + CFG_ENV_SECT_SIZE \
-                                + CFG_STACK_USAGE )
+                               + CFG_MALLOC_LEN \
+                               + CFG_ENV_SECT_SIZE \
+                               + CFG_STACK_USAGE )
 
 #define CFG_MEMTEST_END                (CFG_SDRAM_SIZE * 1024 * 1024 - CFG_MEM_END_USAGE)
 /* END ENVIRONNEMENT FLASH */
 
 /*-----------------------------------------------------------------------
- * Cache Configuration.  Only used to ..?? clear it, I guess.. 
+ * Cache Configuration.  Only used to ..?? clear it, I guess..
  */
 #define CFG_DCACHE_SIZE                16384
 #define CFG_CACHELINE_SIZE     32