[PATCH] Add support for the AMCC Katmai (440SPe) eval board

[u-boot] / include / configs / DB64360.h

diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h
index d6ce8a873b1bb93600d0351a025cc4600de59d6f..bd7aff12cc189aff61116c3d2c6523397a61355f 100644 (file)
--- a/include/configs/DB64360.h
+++ b/include/configs/DB64360.h
@@ -88,8 +88,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/processor.h>
-
 /* This define must be before the core.h include */
 #define CONFIG_DB64360         1       /* this is an DB64360 board     */
 
@@ -176,8 +174,8 @@ if we use PCI it has its own MAC addr */
 /* ronen - autoboot using tftp */
 #if (CONFIG_BOOTDELAY >= 0)
 #define CONFIG_BOOTCOMMAND     "tftpboot 0x400000 uImage;\
- setenv bootargs $(bootargs) $(bootargs_root) nfsroot=$(serverip):$(rootpath) \
- ip=$(ipaddr):$(serverip)$(bootargs_end);  bootm 0x400000; "
+ setenv bootargs ${bootargs} ${bootargs_root} nfsroot=${serverip}:${rootpath} \
+ ip=${ipaddr}:${serverip}${bootargs_end};  bootm 0x400000; "
 
 #define CONFIG_BOOTARGS "console=ttyS0,115200"
 
@@ -192,8 +190,8 @@ cp.b 100000 FFF00000 0x40000;protect on 1:0-7;\0" \
       "bootargs_root=root=/dev/nfs rw\0" \
       "bootargs_end=:::DB64360:eth0:none \0"\
       "ethprime=mv_enet0\0"\
-      "standalone=fsload 0x400000 uImage;setenv bootargs $(bootargs) root=/dev/mtdblock/0 rw \
-ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000;\0"
+      "standalone=fsload 0x400000 uImage;setenv bootargs ${bootargs} root=/dev/mtdblock/0 rw \
+ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 
 /* --------------------------------------------------------------------------------------------------------------- */
 /* New bootcommands for Marvell DB64360 c 2002 Ingo Assmus */
@@ -219,10 +217,27 @@ ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000;\0"
 
 #define CONFIG_BOOTP_MASK      (CONFIG_BOOTP_DEFAULT | \
                                 CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV               "nor1"
+#define CONFIG_JFFS2_PART_SIZE         0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET       0x00000000
+
+/* mtdparts command line support */
 
-/* Flash banks JFFS2 should use */
-#define CFG_JFFS2_FIRST_BANK   1
-#define CFG_JFFS2_NUM_BANKS    1
+/* Use first bank for JFFS2, second bank contains U-Boot.
+ *
+ * Note: fake mtd_id's used, no linux mtd map file.
+ */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT         "nor1=db64360-1"
+#define MTDPARTS_DEFAULT       "mtdparts=db64360-1:-(jffs2)"
+*/
 
 #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
                         | CFG_CMD_ASKENV \