]> git.sur5r.net Git - u-boot/blobdiff - include/configs/KUP4K.h
Merge branch 'mpc86xx'
[u-boot] / include / configs / KUP4K.h
index fc225c918e7934fa9995b189fee6ea9a334ac125..9b950fc5d169ca3083636ac7c8c83e42a9785a99 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
  *
@@ -48,8 +48,6 @@
 #define CONFIG_BOOTDELAY       1       /* autoboot after 1 second      */
 #endif
 
-#define CONFIG_CLOCKS_IN_MHZ   1       /* clocks passsed to Linux in MHz */
-
 #define CONFIG_BOARD_TYPES     1       /* support board types          */
 
 
  "run addhw; diskboot 200000 2:1; bootm 200000\0"                              \
 "nfs_boot=dhcp; run nfsargs addip addhw; bootm 200000\0"                       \
 "panic_boot=echo No Bootdevice !!! reset\0"                                    \
-"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath)\0"   \
+"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0"   \
 "ramargs=setenv bootargs root=/dev/ram rw\0"                                   \
-"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip)"      \
- ":$(netmask):$(hostname):$(netdev):off\0"                                     \
-"addhw=setenv bootargs $(bootargs) hw=$(hw) key1=$(key1) panic=1\0"            \
+"addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}"      \
+ ":${netmask}:${hostname}:${netdev}:off\0"                                     \
+"addhw=setenv bootargs ${bootargs} hw=${hw} key1=${key1} panic=1\0"            \
 "netdev=eth0\0"                                                                        \
 "contrast=55\0"                                                                        \
 "silent=1\0"                                                                   \
 "load=tftp 200000 bootloader-4k.bitmap;tftp 100000 bootloader-4k.bin\0"                \
-"update=protect off 1:0-7;era 1:0-7;cp.b 100000 40000000 $(filesize);"         \
+"update=protect off 1:0-7;era 1:0-7;cp.b 100000 40000000 ${filesize};"         \
  "cp.b 200000 40050000 14000\0"
 
 #define CONFIG_BOOTCOMMAND  \
 #define CONFIG_RTC_PCF8563             /* use Philips PCF8563 RTC      */
 
 #define CFG_DISCOVER_PHY
+#define CONFIG_MII
 
 #if 0
 #define CONFIG_ETHADDR                  00:0B:64:00:00:00 /* our OUI from IEEE */
 #endif
 
 #define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
+                               CFG_CMD_DATE    | \
                                CFG_CMD_DHCP    | \
                                CFG_CMD_I2C     | \
-                               CFG_CMD_DATE    | \
+                               CFG_CMD_IDE     | \
+                               CFG_CMD_NFS     | \
                                CFG_CMD_POST_DIAG       | \
-                               CFG_CMD_IDE     )
+                               CFG_CMD_SNTP    )
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>