i2c, soft-i2c: switch to new multibus/multiadapter support

[u-boot] / include / configs / MHPC.h

diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h
index 19a288c582045e42ceaddf822371d0f4b27ac347..fdd811d77f829903151bfbf800163ed2f444f54d 100644 (file)
--- a/include/configs/MHPC.h
+++ b/include/configs/MHPC.h
@@ -43,6 +43,8 @@
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* do special hardware init.    */
 #define CONFIG_MISC_INIT_R     1
 
+#define        CONFIG_SYS_TEXT_BASE    0xfe000000
+
 #define CONFIG_8xx_GCLK_FREQ   MPC8XX_SPEED
 #undef CONFIG_8xx_CONS_SMC1
 #define CONFIG_8xx_CONS_SMC2   1       /* Console is on SMC2           */
@@ -71,8 +73,10 @@
 #undef CONFIG_UCODE_PATCH
 
 /* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C                 /* I2C with hardware support    */
-#define CONFIG_SOFT_I2C                1       /* I2C bit-banged               */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT            /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED      50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -89,8 +93,6 @@
                        else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY      udelay(5)       /* 1/4 I2C clock duration */
 
-#define CONFIG_SYS_I2C_SPEED                   50000
-#define CONFIG_SYS_I2C_SLAVE                   0xFE
 #define CONFIG_SYS_I2C_EEPROM_ADDR             0x50    /* EEPROM X24C04                */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1       /* bytes of address             */
 /* mask of address bits that overflow into the "EEPROM chip address"   */
@@ -160,8 +162,6 @@
 
 #define CONFIG_SYS_HZ                  1000            /* decrementer freq: 1 ms ticks */
 
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -177,9 +177,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END        0x2F00  /* End of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE       64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2F00  /* Size of used area in DPRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -386,12 +385,4 @@
  */
 #define CONFIG_SYS_DER 0
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */