CMD: Fix typo KGBD -> KGDB on debris board

[u-boot] / include / configs / MPC8313ERDB.h

diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 21771fd0116aef12c0a4ec3cb71731e6cd7c2b9f..863c9b9ec01bd27a6c1356befb4d5a0b56451892 100644 (file)
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -82,7 +82,8 @@
 
 #define CONFIG_SYS_CLK_FREQ    CONFIG_83XX_CLKIN
 
-#define CONFIG_BOARD_EARLY_INIT_F              /* call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_F              /* call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_R              /* call board_early_init_r */
 
 #define CONFIG_SYS_IMMR                0xE0000000
 
@@ -130,7 +131,7 @@
  * seem to have the SPD connected to I2C.
  */
 #define CONFIG_SYS_DDR_SIZE    128             /* MB */
-#define CONFIG_SYS_DDR_CONFIG  (CSCONFIG_EN \
+#define CONFIG_SYS_DDR_CS0_CONFIG      (CSCONFIG_EN \
                                | CSCONFIG_ODT_RD_NEVER \
                                | CSCONFIG_ODT_WR_ONLY_CURRENT \
                                | CSCONFIG_ROW_BIT_13 \
@@ -266,7 +267,7 @@
 #define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT                 "nand0=e2800000.flash"
 #define MTDPARTS_DEFAULT               \
-       "mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
+       "mtdparts=e2800000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
@@ -363,6 +364,9 @@
 #define CONFIG_OF_BOARD_SETUP  1
 #define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
+#define CONFIG_MPC83XX_GPIO 1
+#define CONFIG_CMD_GPIO 1
+
 /*
  * Serial Port
  */
@@ -581,7 +585,8 @@
 
 /* System IO Config */
 #define CONFIG_SYS_SICRH       (SICRH_TSOBI1 | SICRH_TSOBI2)   /* RGMII */
-#define CONFIG_SYS_SICRL       SICRL_USBDR_10  /* Enable Internal USB Phy  */
+                       /* Enable Internal USB Phy and GPIO on LCD Connector */
+#define CONFIG_SYS_SICRL       (SICRL_USBDR_10 | SICRL_LBC)
 
 #define CONFIG_SYS_HID0_INIT   0x000000000
 #define CONFIG_SYS_HID0_FINAL  (HID0_ENABLE_MACHINE_CHECK | \