DaVinci DM6467: Enhance board Support

[u-boot] / include / configs / MPC8360ERDK.h

diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index e78cf60a109ffb9d08aa71831e2c1f9839288240..b0cdc02c1dea4f344dd4f081cdc0c75ad6541af0 100644 (file)
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -26,18 +26,20 @@
 #define CONFIG_MPC8360         1 /* MPC8360 CPU specific */
 #define CONFIG_MPC8360ERDK     1 /* MPC8360ERDK board specific */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFF800000
+
 /*
  * System Clock Setup
  */
 #ifdef CONFIG_CLKIN_33MHZ
 #define CONFIG_83XX_CLKIN              33333333
 #define CONFIG_SYS_CLK_FREQ            33333333
-#define PCI_33M                                1
+#define CONFIG_PCI_33M                         1
 #define HRCWL_CSB_TO_CLKIN_MPC8360ERDK HRCWL_CSB_TO_CLKIN_10X1
 #else
 #define CONFIG_83XX_CLKIN              66000000
 #define CONFIG_SYS_CLK_FREQ            66000000
-#define PCI_66M                                1
+#define CONFIG_PCI_66M                         1
 #define HRCWL_CSB_TO_CLKIN_MPC8360ERDK HRCWL_CSB_TO_CLKIN_5X1
 #endif /* CONFIG_CLKIN_33MHZ */
 
@@ -153,7 +155,7 @@
 /*
  * The reserved memory
  */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE /* start of monitor */
 #define CONFIG_SYS_FLASH_BASE          0xFF800000 /* FLASH base address */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
@@ -170,9 +172,8 @@
  */
 #define CONFIG_SYS_INIT_RAM_LOCK       1
 #define CONFIG_SYS_INIT_RAM_ADDR       0xE6000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END        0x1000 /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE       0x100 /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000 /* Size of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 /*
  * Local Bus Configuration & Clock Setup
@@ -237,7 +238,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -309,7 +309,7 @@
  * QE UEC ethernet configuration
  */
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME                "FSL UEC0"
+#define CONFIG_ETHPRIME                "UEC0"
 
 #define CONFIG_UEC_ETH1                /* GETH1 */
 
@@ -404,10 +404,10 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ           (256 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
@@ -485,14 +485,6 @@
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 #endif /* CONFIG_PCI */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */