DaVinci DM6467: Enhance board Support

[u-boot] / include / configs / MPC8536DS.h

diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 5c5be0ce919e72f51811d3ef10de7c1efaac3ea6..11ee6504186ebab9998b88bc7f6ae005a0312ea0 100644 (file)
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007-2009,2010 Freescale Semiconductor, Inc.
+ * Copyright 2007-2009,2010-2011 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -47,17 +47,23 @@
 #ifdef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_SDCARD          1
 #define CONFIG_SYS_TEXT_BASE   0xf8f80000
+#define CONFIG_RESET_VECTOR_ADDRESS    0xf8fffffc
 #endif
 
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH                1
 #define CONFIG_SYS_TEXT_BASE   0xf8f80000
+#define CONFIG_RESET_VECTOR_ADDRESS    0xf8fffffc
 #endif
 
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE   0xeff80000
 #endif
 
+#ifndef        CONFIG_RESET_VECTOR_ADDRESS
+#define CONFIG_RESET_VECTOR_ADDRESS    0xeffffffc
+#endif
+
 #ifndef CONFIG_SYS_MONITOR_BASE
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 #endif
@@ -78,7 +84,6 @@
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
-#define CONFIG_SYS_HAS_SERDES          /* has SERDES */
 
 #define CONFIG_FSL_LAW         1       /* Use common FSL init code */
 #define CONFIG_E1000           1       /* Defind e1000 pci Ethernet card*/
@@ -145,7 +150,6 @@
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
-#undef CONFIG_DDR_DLL
 
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER      /* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE  0xDeadBeef
@@ -486,6 +490,7 @@
 #define CONFIG_SYS_PCI1_IO_SIZE                0x00010000      /* 64k */
 
 /* controller 1, Slot 1, tgtid 1, Base address a000 */
+#define CONFIG_SYS_PCIE1_NAME          "Slot 1"
 #define CONFIG_SYS_PCIE1_MEM_VIRT      0x90000000
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_PCIE1_MEM_BUS       0xf8000000
@@ -505,6 +510,7 @@
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
 
 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
+#define CONFIG_SYS_PCIE2_NAME          "Slot 2"
 #define CONFIG_SYS_PCIE2_MEM_VIRT      0x98000000
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_PCIE2_MEM_BUS       0xf8000000
@@ -524,6 +530,7 @@
 #define CONFIG_SYS_PCIE2_IO_SIZE       0x00010000      /* 64k */
 
 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
+#define CONFIG_SYS_PCIE3_NAME          "Slot 3"
 #define CONFIG_SYS_PCIE3_MEM_VIRT      0xa0000000
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_PCIE3_MEM_BUS       0xe0000000
@@ -717,6 +724,7 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTM_LEN   (16 << 20)      /* Increase max gunzip size */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */