configs: Migrate CONFIG_USB_STORAGE

[u-boot] / include / configs / MPC8536DS.h

diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index f22ba9b052e34d2119394a236a7a856e2752fc3f..39181609fabba3f77ba2a6e9742da42ab651933a 100644 (file)
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -14,10 +14,6 @@
 #define CONFIG_DISPLAY_BOARDINFO
 #include "../board/freescale/common/ics307_clk.h"
 
-#ifdef CONFIG_36BIT
-#define CONFIG_PHYS_64BIT      1
-#endif
-
 #ifdef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_SDCARD          1
 #define CONFIG_SYS_TEXT_BASE   0xf8f40000
@@ -51,9 +47,9 @@
 #define CONFIG_FSL_ELBC                1       /* Has Enhanced localbus controller */
 #define CONFIG_PCI             1       /* Enable PCI/PCIE */
 #define CONFIG_PCI1            1       /* Enable PCI controller 1 */
-#define CONFIG_PCIE1           1       /* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2           1       /* PCIE controler 2 (slot 2) */
-#define CONFIG_PCIE3           1       /* PCIE controler 3 (ULI bridge) */
+#define CONFIG_PCIE1           1       /* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2           1       /* PCIE controller 2 (slot 2) */
+#define CONFIG_PCIE3           1       /* PCIE controller 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
@@ -549,7 +545,6 @@
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 #if defined(CONFIG_TSEC_ENET)
@@ -617,7 +612,6 @@
  * Command line configuration.
  */
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_REGINFO
 
@@ -632,7 +626,6 @@
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
 #endif
 
@@ -646,13 +639,10 @@
 #ifdef CONFIG_USB_EHCI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
-#define CONFIG_USB_STORAGE
 #endif
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -711,7 +701,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                1000000
 
-#define CONFIG_BOOTDELAY 10    /* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
 
 #define CONFIG_BAUDRATE        115200
@@ -733,7 +722,7 @@
 "consoledev=ttyS0\0"                           \
 "ramdiskaddr=2000000\0"                        \
 "ramdiskfile=8536ds/ramdisk.uboot\0"           \
-"fdtaddr=c00000\0"                             \
+"fdtaddr=1e00000\0"                            \
 "fdtfile=8536ds/mpc8536ds.dtb\0"               \
 "bdev=sda3\0"                                  \
 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"