SPDX: Convert all of our single license tags to Linux Kernel style

[u-boot] / include / configs / MPC8544DS.h

diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 3b62449ea5f61ffbe52a7f52f7abd7e2b4406bff..7973f3ceaefb18ffa44b16dbbce5ac6c581d9947 100644 (file)
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -11,10 +10,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE   0xfff80000
-#endif
-
 #define CONFIG_PCI1            1       /* PCI controller 1 */
 #define CONFIG_PCIE1           1       /* PCIE controller 1 (slot 1) */
 #define CONFIG_PCIE2           1       /* PCIE controller 2 (slot 2) */
@@ -24,7 +19,6 @@
 #define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
 
-#define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_INTERRUPTS              /* enable pci, srio, ddr interrupts */
 
@@ -46,7 +40,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x00400000
-#define CONFIG_PANIC_HANG      /* do not reset board on panic */
 
 #define CONFIG_SYS_CCSRBAR             0xe0000000
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
@@ -180,7 +173,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * open - index 2
  * shorted - index 1
  */
-#define CONFIG_CONS_INDEX      1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -282,10 +274,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
-#define CONFIG_SCSI_AHCI
 
 #ifdef CONFIG_SCSI_AHCI
-#define CONFIG_LIBATA
 #define CONFIG_SATA_ULI5288
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID    4
 #define CONFIG_SYS_SCSI_MAX_LUN        1
@@ -318,14 +308,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define TSEC3_PHYIDX           0
 
 #define CONFIG_ETHPRIME                "eTSEC1"
-
-#define CONFIG_PHY_GIGE                1       /* Include GbE speed/duplex detection */
 #endif /* CONFIG_TSEC_ENET */
 
 /*
  * Environment
  */
-#define CONFIG_ENV_IS_IN_FLASH 1
 #define CONFIG_ENV_SECT_SIZE   0x10000 /* 64K (one sector) */
 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
 #define CONFIG_ENV_ADDR                0xfff80000
@@ -341,26 +328,12 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-    #define CONFIG_SCSI
-#endif
 
 /*
  * USB
  */
 
 #ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_USB_EHCI_PCI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_PCI_EHCI_DEVICE                 0
 #endif
@@ -370,18 +343,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
-#define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data
@@ -407,7 +369,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_IPADDR  192.168.1.251
 
-#define CONFIG_HOSTNAME        8544ds_unknown
+#define CONFIG_HOSTNAME        "8544ds_unknown"
 #define CONFIG_ROOTPATH        "/nfs/mpc85xx"
 #define CONFIG_BOOTFILE        "8544ds/uImage.uboot"
 #define CONFIG_UBOOTPATH       8544ds/u-boot.bin       /* TFTP server */
@@ -418,8 +380,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_LOADADDR        1000000 /*default location for tftp and bootm*/
 
-#undef CONFIG_BOOTARGS         /* the boot command will set bootargs*/
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
 "netdev=eth0\0"                                                \
 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                    \