Merge git://git.denx.de/u-boot-nand-flash

[u-boot] / include / configs / MPC8548CDS.h

diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 8deb241c39167537f91a6efb0c2a58dad0f8f38b..e73be48d5189402127be4e2b618d1963a0db4657 100644 (file)
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -13,6 +13,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_DISPLAY_BOARDINFO
+
 #ifdef CONFIG_36BIT
 #define CONFIG_PHYS_64BIT
 #endif
@@ -20,7 +22,6 @@
 /* High Level Configuration Options */
 #define CONFIG_BOOKE           1       /* BOOKE */
 #define CONFIG_E500            1       /* BOOKE e500 family */
-#define CONFIG_MPC85xx         1       /* MPC8540/60/55/41/48 */
 #define CONFIG_MPC8548         1       /* MPC8548 specific */
 #define CONFIG_MPC8548CDS      1       /* MPC8548CDS board specific */
 
@@ -33,7 +34,7 @@
 
 #define CONFIG_PCI             /* enable any pci type devices */
 #define CONFIG_PCI1            /* PCI controller 1 */
-#define CONFIG_PCIE1           /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE1           /* PCIE controller 1 (slot 1) */
 #undef CONFIG_PCI2
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
@@ -75,7 +76,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
-#define CONFIG_FSL_DDR2
+#define CONFIG_SYS_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
@@ -131,7 +132,6 @@ extern unsigned long get_clock_freq(void);
  *
  */
 
-
 /*
  * Local Bus Definitions
  */
@@ -320,7 +320,6 @@ extern unsigned long get_clock_freq(void);
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX      2
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -331,14 +330,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT               1
-#define CONFIG_OF_BOARD_SETUP          1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
-
 /*
  * I2C
  */
@@ -424,13 +415,11 @@ extern unsigned long get_clock_freq(void);
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
-#define CONFIG_E1000                   /* Define e1000 pci Ethernet card */
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 
 #endif /* CONFIG_PCI */
 
-
 #if defined(CONFIG_TSEC_ENET)
 
 #define CONFIG_MII             1       /* MII PHY management */
@@ -488,25 +477,16 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
 #endif
 
-
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
 /*
@@ -516,7 +496,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
 #else
@@ -525,7 +504,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -537,23 +515,16 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*
  * Environment Configuration
  */
-
-/* The mac addresses for all ethernet interface */
 #if defined(CONFIG_TSEC_ENET)
 #define CONFIG_HAS_ETH0
-#define CONFIG_ETHADDR  00:E0:0C:00:00:FD
 #define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR         00:E0:0C:00:01:FD
 #define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR         00:E0:0C:00:02:FD
 #define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR         00:E0:0C:00:03:FD
 #endif
 
 #define CONFIG_IPADDR   192.168.1.253
@@ -569,7 +540,6 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_LOADADDR        1000000 /*default location for tftp and bootm*/
 
-#define CONFIG_BOOTDELAY 10    /* -1 disables auto-boot */
 #undef CONFIG_BOOTARGS         /* the boot command will set bootargs*/
 
 #define CONFIG_BAUDRATE        115200
@@ -604,7 +574,6 @@ extern unsigned long get_clock_freq(void);
    "tftp $fdtaddr $fdtfile;"                                           \
    "bootm $loadaddr - $fdtaddr"
 
-
 #define CONFIG_RAMBOOTCOMMAND \
    "setenv bootargs root=/dev/ram rw "                                 \
       "console=$consoledev,$baudrate $othbootargs;"                    \