added the config File for the MUNICes board.

[u-boot] / include / configs / MPC8560ADS.h

diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 8ce8a537526952516b1f52f82a7d377fdd18df56..5f105552f40b87d05137f64fa5f887fbc510dc3f 100644 (file)
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -43,9 +43,7 @@
 
 #define CONFIG_PCI
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
-#undef CONFIG_TSEC_ENET                /* tsec ethernet support */
-#undef  CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
-#define  CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
+#undef CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_DLL                 /* possible DLL fix needed */
@@ -291,16 +289,9 @@
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE    1
-#define CONFIG_OF_BOARD_SETUP  1
-
-/* maximum size of the flat tree (8K) */
-#define OF_FLAT_TREE_MAX_SIZE  8192
-
-#define OF_CPU                 "PowerPC,8560@0"
-#define OF_SOC                 "soc8560@e0000000"
-#define OF_TBCLK               (bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH         "/soc8560@e0000000/serial@4500"
+#define CONFIG_OF_LIBFDT               1
+#define CONFIG_OF_BOARD_SETUP          1
+#define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
 /*
  * I2C
@@ -349,29 +340,33 @@
 #endif /* CONFIG_PCI */
 
 
-#if defined(CONFIG_TSEC_ENET)
+#ifdef CONFIG_TSEC_ENET
 
 #ifndef CONFIG_NET_MULTI
 #define CONFIG_NET_MULTI       1
 #endif
 
+#ifndef CONFIG_MII
 #define CONFIG_MII             1       /* MII PHY management */
+#endif
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "TSEC0"
 #define CONFIG_TSEC2   1
 #define CONFIG_TSEC2_NAME      "TSEC1"
-#undef CONFIG_MPC85XX_FEC
 #define TSEC1_PHY_ADDR         0
 #define TSEC2_PHY_ADDR         1
 #define TSEC1_PHYIDX           0
 #define TSEC2_PHYIDX           0
+#define TSEC1_FLAGS            TSEC_GIGABIT
+#define TSEC2_FLAGS            TSEC_GIGABIT
 
 /* Options are: TSEC[0-1] */
 #define CONFIG_ETHPRIME                "TSEC0"
 
-#elif defined(CONFIG_ETHER_ON_FCC)     /* CPM FCC Ethernet */
+#endif /* CONFIG_TSEC_ENET */
+
+#ifdef CONFIG_ETHER_ON_FCC     /* CPM FCC Ethernet */
 
-#define CONFIG_ETHER_ON_FCC    /* define if ether on FCC   */
 #undef  CONFIG_ETHER_NONE      /* define if ether on something else */
 #define CONFIG_ETHER_INDEX      2       /* which channel for ether */
 
@@ -392,7 +387,10 @@
   #define FETH3_RST            0x80
 #endif                                 /* CONFIG_ETHER_INDEX */
 
-#define CONFIG_MII                     /* MII PHY management */
+#ifndef CONFIG_MII
+#define CONFIG_MII             1       /* MII PHY management */
+#endif
+
 #define CONFIG_BITBANGMII              /* bit-bang MII PHY management */
 
 /*
@@ -448,6 +446,7 @@
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -469,6 +468,7 @@
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP                   /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING         /* Command-line editing */
 #define CFG_LOAD_ADDR  0x1000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
 
@@ -490,13 +490,6 @@
  */
 #define CFG_BOOTMAPSZ  (8 << 20)       /* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE                32768
-#define CFG_CACHELINE_SIZE     32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
@@ -517,11 +510,14 @@
 
 /* The mac addresses for all ethernet interface */
 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+#define CONFIG_HAS_ETH0
 #define CONFIG_ETHADDR   00:E0:0C:00:00:FD
 #define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
 #define CONFIG_HAS_ETH2
 #define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR  00:E0:0C:00:03:FD
 #endif
 
 #define CONFIG_IPADDR    192.168.1.253
@@ -543,9 +539,11 @@
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
    "netdev=eth0\0"                                                      \
-   "consoledev=ttyS0\0"                                                 \
-   "ramdiskaddr=400000\0"                                              \
-   "ramdiskfile=your.ramdisk.u-boot\0"
+   "consoledev=ttyCPM\0"                                               \
+   "ramdiskaddr=1000000\0"                                             \
+   "ramdiskfile=your.ramdisk.u-boot\0"                                 \
+   "fdtaddr=400000\0"                                                  \
+   "fdtfile=mpc8560ads.dtb\0"
 
 #define CONFIG_NFSBOOTCOMMAND                                          \
    "setenv bootargs root=/dev/nfs rw "                                  \
@@ -553,14 +551,16 @@
       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $loadaddr $bootfile;"                                          \
-   "bootm $loadaddr"
+   "tftp $fdtaddr $fdtfile;"                                           \
+   "bootm $loadaddr - $fdtaddr"
 
 #define CONFIG_RAMBOOTCOMMAND \
    "setenv bootargs root=/dev/ram rw "                                  \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $ramdiskaddr $ramdiskfile;"                                    \
    "tftp $loadaddr $bootfile;"                                          \
-   "bootm $loadaddr $ramdiskaddr"
+   "tftp $fdtaddr $fdtfile;"                                           \
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
 #define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND