ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DS

[u-boot] / include / configs / MPC8572DS.h

diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 6f1b1a4c83ccf11dd157a343a6cc92e0321ef40d..000f8f62d62716de320909612945c1b812901f10 100644 (file)
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -27,6 +27,10 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#ifdef CONFIG_MK_36BIT
+#define CONFIG_PHYS_64BIT
+#endif
+
 /* High Level Configuration Options */
 #define CONFIG_BOOKE           1       /* BOOKE */
 #define CONFIG_E500            1       /* BOOKE e500 family */
@@ -34,7 +38,6 @@
 #define CONFIG_MPC8572         1
 #define CONFIG_MPC8572DS       1
 #define CONFIG_MP              1       /* support multiple processors */
-#define CONFIG_NUM_CPUS                2       /* Number of CPUs in the system */
 
 #define CONFIG_FSL_ELBC                1       /* Has Enhanced localbus controller */
 #define CONFIG_PCI             1       /* Enable PCI/PCIE */
@@ -237,6 +240,11 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define PIXIS_VCFGEN1          0x13    /* VELA Config Enable 1 */
 #define PIXIS_VCORE0           0x14    /* VELA VCORE0 Register */
 #define PIXIS_VBOOT            0x16    /* VELA VBOOT Register */
+#define PIXIS_VBOOT_LBMAP      0xc0    /* VBOOT - CFG_LBMAP */
+#define PIXIS_VBOOT_LBMAP_NOR0 0x00    /* cfg_lbmap - boot from NOR 0 */
+#define PIXIS_VBOOT_LBMAP_PJET 0x01    /* cfg_lbmap - boot from projet */
+#define PIXIS_VBOOT_LBMAP_NAND 0x02    /* cfg_lbmap - boot from NAND */
+#define PIXIS_VBOOT_LBMAP_NOR1 0x03    /* cfg_lbmap - boot from NOR 1 */
 #define PIXIS_VSPEED0          0x17    /* VELA VSpeed 0 */
 #define PIXIS_VSPEED1          0x18    /* VELA VSpeed 1 */
 #define PIXIS_VSPEED2          0x19    /* VELA VSpeed 2 */
@@ -484,12 +492,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #undef CONFIG_TULIP
 #undef CONFIG_RTL8139
 
-#ifdef CONFIG_RTL8139
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x)           (x)
-#define _IO_BASE       0x00000000
-#endif
-
 #ifndef CONFIG_PCI_PNP
        #define PCI_ENET0_IOADDR        CONFIG_SYS_PCIE3_IO_BUS
        #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCIE3_IO_BUS
@@ -586,7 +588,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_BEDBUG
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_SCSI
 #define CONFIG_CMD_EXT2
@@ -613,10 +614,10 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 16 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions