sunxi: Store the device tree name in the SPL header

[u-boot] / include / configs / MPC8610HPCD.h

diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 4cf9bd6e77fa68970eaf6677894efc28ff444a01..2014450be839dc01c449a5f089ff0e22a5bb23e6 100644 (file)
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -21,7 +21,6 @@
 
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_CCSRBAR + 0x2c000)
-#define CONFIG_CMD_BMP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #endif
@@ -42,7 +41,6 @@
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
-#define CONFIG_FSL_LAW         1       /* Use common FSL init code */
 
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_INTERRUPTS              /* enable pci, srio, ddr interrupts */
@@ -62,7 +60,6 @@
 #define CONFIG_SYS_CLK_FREQ    get_board_sys_clk(0)
 #endif
 
-#define CONFIG_BOARD_EARLY_INIT_F      1       /* Call board_pre_init */
 #define CONFIG_MISC_INIT_R             1
 
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest region */
@@ -80,7 +77,6 @@
 #define CONFIG_SYS_CCSRBAR_PHYS                CONFIG_SYS_CCSRBAR_PHYS_LOW
 
 /* DDR Setup */
-#define CONFIG_SYS_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD for DDR */
 #define CONFIG_DDR_SPD
@@ -93,7 +89,6 @@
 #define CONFIG_SYS_MAX_DDR_BAT_SIZE    0x80000000      /* BAT mapping size */
 #define CONFIG_VERY_BIG_RAM
 
-#define CONFIG_NUM_DDR_CONTROLLERS     1
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
@@ -289,7 +284,6 @@
 #define PCI_IDSEL_NUMBER       0x0c    /* slot0->3(IDSEL)=12->15 */
 #endif
 
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SCSI_AHCI
 
 #ifdef CONFIG_SCSI_AHCI
@@ -490,8 +484,6 @@
 
 #undef CONFIG_BOOTARGS         /* the boot command will set bootargs */
 
-#define CONFIG_BAUDRATE        115200
-
 #if defined(CONFIG_PCI1)
 #define PCI_ENV \
  "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \