COMMON: Use __stringify() instead of xstr()

[u-boot] / include / configs / P1022DS.h

diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 50d3f8d703550e44ed407e9b4f6ebcae70c546b0..1d97e957202a101dd8a45dcfe16a24c92147a281 100644 (file)
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -18,6 +18,22 @@
 #define CONFIG_PHYS_64BIT
 #endif
 
+#ifdef CONFIG_SDCARD
+#define CONFIG_RAMBOOT_SDCARD
+#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_SYS_TEXT_BASE           0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS    0x1107fffc
+#endif
+
+#ifdef CONFIG_SPIFLASH
+#define CONFIG_RAMBOOT_SPIFLASH
+#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_SYS_TEXT_BASE           0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS    0x1107fffc
+#endif
+
 /* High Level Configuration Options */
 #define CONFIG_BOOKE                   /* BOOKE */
 #define CONFIG_E500                    /* BOOKE e500 family */
@@ -118,7 +134,7 @@
 #endif
 
 #define CONFIG_FLASH_BR_PRELIM  \
-       (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V)
+       (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
 #define CONFIG_FLASH_OR_PRELIM (OR_AM_128MB | 0xff7)
 
 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
@@ -402,11 +418,40 @@
 /*
  * Environment
  */
+#ifdef CONFIG_SYS_RAMBOOT
+#ifdef CONFIG_RAMBOOT_SPIFLASH
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_BUS     0
+#define CONFIG_ENV_SPI_CS      0
+#define CONFIG_ENV_SPI_MAX_HZ  10000000
+#define CONFIG_ENV_SPI_MODE    0
+#define CONFIG_ENV_SIZE                0x2000  /* 8KB */
+#define CONFIG_ENV_OFFSET      0x100000        /* 1MB */
+#define CONFIG_ENV_SECT_SIZE   0x10000
+#elif defined(CONFIG_RAMBOOT_SDCARD)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_SIZE                0x2000
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#elif defined(CONFIG_NAND_U_BOOT)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE                CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET      ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_ENV_RANGE       (3 * CONFIG_ENV_SIZE)
+#else
+#define CONFIG_ENV_IS_NOWHERE  /* Store ENV in memory only */
+#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - 0x1000)
+#define CONFIG_ENV_SIZE                0x2000
+#endif
+#else
 #define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
+#define CONFIG_ENV_ADDR        0xfff80000
+#else
+#define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#endif
 #define CONFIG_ENV_SIZE                0x2000
-#define CONFIG_ENV_SECT_SIZE   0x20000
+#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
+#endif
 
 #define CONFIG_LOADS_ECHO
 #define CONFIG_SYS_LOADS_BAUD_CHANGE