configs: Migrate CONFIG_USB_STORAGE

[u-boot] / include / configs / P1022DS.h

diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 527287864b7109ca06f7c369744539e557e1e37e..9fbc12838430f811fb870e871f27633117cc94b6 100644 (file)
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -13,10 +13,6 @@
 
 #define CONFIG_DISPLAY_BOARDINFO
 
-#ifdef CONFIG_36BIT
-#define CONFIG_PHYS_64BIT
-#endif
-
 #ifdef CONFIG_SDCARD
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
@@ -134,9 +130,9 @@
 
 #define CONFIG_FSL_ELBC                        /* Has Enhanced localbus controller */
 #define CONFIG_PCI                     /* Enable PCI/PCIE */
-#define CONFIG_PCIE1                   /* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2                   /* PCIE controler 2 (slot 2) */
-#define CONFIG_PCIE3                   /* PCIE controler 3 (ULI bridge) */
+#define CONFIG_PCIE1                   /* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2                   /* PCIE controller 2 (slot 2) */
+#define CONFIG_PCIE3                   /* PCIE controller 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET          /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
@@ -172,7 +168,6 @@
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
-
 /* DDR Setup */
 #define CONFIG_DDR_SPD
 #define CONFIG_VERY_BIG_RAM
@@ -217,7 +212,6 @@
 #define        CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 #define CONFIG_SYS_DDR_WRLVL_CONTROL   0x8675f608
 
-
 /*
  * Memory map
  *
@@ -554,20 +548,16 @@
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 #define CONFIG_MMC
 #ifdef CONFIG_MMC
-#define CONFIG_CMD_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -661,7 +651,6 @@
  */
 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
@@ -678,8 +667,6 @@
 #ifdef CONFIG_USB_EHCI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_FAT
 #endif
 #endif
 
@@ -723,7 +710,6 @@
 
 #define CONFIG_LOADADDR                1000000
 
-#define CONFIG_BOOTDELAY       10      /* -1 disables auto-boot */
 
 #define CONFIG_BAUDRATE        115200
 
@@ -740,7 +726,7 @@
        "consoledev=ttyS0\0"                                    \
        "ramdiskaddr=2000000\0"                                 \
        "ramdiskfile=rootfs.ext2.gz.uboot\0"                    \
-       "fdtaddr=c00000\0"                                      \
+       "fdtaddr=1e00000\0"                                     \
        "fdtfile=p1022ds.dtb\0"                                 \
        "bdev=sda3\0"                                           \
        "hwconfig=esdhc;audclk:12\0"