DaVinci DM6467: Enhance board Support

[u-boot] / include / configs / P2020DS.h

diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index e7cdb92fb055f6c0522bb248c547ba9887145be5..b32a9976f61a9f66c2083b889257a6ccffbf0d5d 100644 (file)
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007-2010 Freescale Semiconductor, Inc.
+ * Copyright 2007-2011 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -45,6 +45,14 @@
 #define CONFIG_SYS_TEXT_BASE   0xeff80000
 #endif
 
+#ifndef CONFIG_RESET_VECTOR_ADDRESS
+#define CONFIG_RESET_VECTOR_ADDRESS    0xeffffffc
+#endif
+
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1                   /* SRIO port 1 */
+#define CONFIG_SRIO2                   /* SRIO port 2 */
+
 #define CONFIG_FSL_ELBC                1       /* Has Enhanced localbus controller */
 #define CONFIG_PCI             1       /* Enable PCI/PCIE */
 #define CONFIG_PCIE1           1       /* PCIE controler 1 (slot 1) */
@@ -77,8 +85,9 @@
 #define CONFIG_SYS_NUM_ADDR_MAP                16      /* number of TLB1 entries */
 #endif
 
-#define CONFIG_SYS_MEMTEST_START       0x00000000      /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END         0x7fffffff
+#define CONFIG_POST CONFIG_SYS_POST_MEMORY     /* test POST memory test */
+#define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END         0x00400000
 #define CONFIG_PANIC_HANG      /* do not reset board on panic */
 
 /*
@@ -271,10 +280,9 @@
 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 #endif
-#define CONFIG_SYS_INIT_RAM_END        0x00004000      /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE       0x00004000      /* Size of used area in RAM */
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_LEN         (256 * 1024) /* Reserve 256 kB for Mon */
@@ -394,6 +402,7 @@
  */
 
 /* controller 3, Slot 1, tgtid 3, Base address b000 */
+#define CONFIG_SYS_PCIE3_NAME          "Slot 1"
 #define CONFIG_SYS_PCIE3_MEM_VIRT      0x80000000
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_PCIE3_MEM_BUS       0xe0000000
@@ -413,6 +422,7 @@
 #define CONFIG_SYS_PCIE3_IO_SIZE       0x00010000      /* 64k */
 
 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
+#define CONFIG_SYS_PCIE2_NAME          "ULI"
 #define CONFIG_SYS_PCIE2_MEM_VIRT      0xa0000000
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_PCIE2_MEM_BUS       0xe0000000
@@ -432,6 +442,7 @@
 #define CONFIG_SYS_PCIE2_IO_SIZE       0x00010000      /* 64k */
 
 /* controller 1, Slot 2, tgtid 1, Base address a000 */
+#define CONFIG_SYS_PCIE1_NAME          "Slot 2"
 #define CONFIG_SYS_PCIE1_MEM_VIRT      0xc0000000
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_PCIE1_MEM_BUS       0xe0000000
@@ -469,6 +480,24 @@
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 #endif
 
+/* SRIO1 uses the same window as PCIE2 mem window */
+#define CONFIG_SYS_SRIO1_MEM_VIRT      0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_SRIO1_MEM_PHYS      0xc20000000ull
+#else
+#define CONFIG_SYS_SRIO1_MEM_PHYS      0xa0000000
+#endif
+#define CONFIG_SYS_SRIO1_MEM_SIZE      0x20000000      /* 512M */
+
+/* SRIO2 uses the same window as PCIE1 mem window */
+#define CONFIG_SYS_SRIO2_MEM_VIRT      0xc0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_SRIO2_MEM_PHYS      0xc40000000ull
+#else
+#define CONFIG_SYS_SRIO2_MEM_PHYS      0xc0000000
+#endif
+#define CONFIG_SYS_SRIO2_MEM_SIZE      0x20000000      /* 512M */
+
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
@@ -608,6 +637,7 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN   (16 << 20)      /* Increase max gunzip size */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */