treewide: move CONFIG_PHYS_64BIT to Kconfig

[u-boot] / include / configs / P2041RDB.h

diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 6f9680fcbbea2225da1904e08f4044a54f1ad686..e6057f9ea48e0102d0ccdacd765df896aa7d1bf7 100644 (file)
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -12,7 +12,6 @@
 #define __CONFIG_H
 
 #define CONFIG_P2041RDB
-#define CONFIG_PHYS_64BIT
 #define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_PPC_P2041
 
@@ -52,9 +51,9 @@
 #define CONFIG_FSL_ELBC                        /* Has Enhanced localbus controller */
 #define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
 #define CONFIG_PCI                     /* Enable PCI/PCIE */
-#define CONFIG_PCIE1                   /* PCIE controler 1 */
-#define CONFIG_PCIE2                   /* PCIE controler 2 */
-#define CONFIG_PCIE3                   /* PCIE controler 3 */
+#define CONFIG_PCIE1                   /* PCIE controller 1 */
+#define CONFIG_PCIE2                   /* PCIE controller 2 */
+#define CONFIG_PCIE3                   /* PCIE controller 3 */
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
 
@@ -397,7 +396,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE          0
 
@@ -569,7 +567,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 #ifdef CONFIG_FMAN_ENET
@@ -601,13 +598,8 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI
@@ -620,25 +612,19 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_HAS_FSL_MPH_USB
 
 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-#define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif
 
-#define CONFIG_CMD_EXT2
-
 #define CONFIG_MMC
 
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -689,7 +675,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                1000000
 
-#define CONFIG_BOOTDELAY       10      /* -1 disables auto-boot */
 
 #define CONFIG_BAUDRATE        115200
 
@@ -712,7 +697,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
        "usb_dr_mode=host\0"                                    \
        "ramdiskaddr=2000000\0"                                 \
        "ramdiskfile=p2041rdb/ramdisk.uboot\0"                  \
-       "fdtaddr=c00000\0"                                      \
+       "fdtaddr=1e00000\0"                                     \
        "fdtfile=p2041rdb/p2041rdb.dtb\0"                       \
        "bdev=sda3\0"