ARM: versatile: pass console setting to the kernel

[u-boot] / include / configs / P2041RDB.h

diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 43387d7492e5d5e54c5b30bbecac753e168456ea..ee71252b00a7bed7c2852fa658ccab9ae1f21f65 100644 (file)
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -37,7 +37,6 @@
 #define CONFIG_E500MC                  /* BOOKE e500mc family */
 #define CONFIG_SYS_BOOK3E_HV           /* Category E.HV supported */
 #define CONFIG_MPC85xx                 /* MPC85xx/PQ3 platform */
-#define CONFIG_FSL_CORENET             /* Freescale CoreNet platform */
 #define CONFIG_MP                      /* support multiple processors */
 
 #ifndef CONFIG_SYS_TEXT_BASE
@@ -176,7 +175,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CHIP_SELECTS_PER_CTRL   (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
 #define CONFIG_DDR_SPD
-#define CONFIG_FSL_DDR3
+#define CONFIG_SYS_FSL_DDR3
 
 #define CONFIG_SYS_SPD_BUS_NUM 0
 #define SPD_EEPROM_ADDRESS     0x52
@@ -351,14 +350,14 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_FIT_VERBOSE     /* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C                /* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED           400000
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_OFFSET          0x118000
-#define CONFIG_SYS_I2C2_OFFSET         0x118100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       400000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x118000
+#define CONFIG_SYS_FSL_I2C2_SPEED      400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET     0x118100
 
 /*
  * RapidIO
@@ -656,7 +655,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
 #else
@@ -668,7 +666,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ          1000            /* decrementer freq 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -680,7 +677,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*
@@ -747,8 +743,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_BOOTCOMMAND             CONFIG_HDBOOT
 
-#ifdef CONFIG_SECURE_BOOT
 #include <asm/fsl_secure_boot.h>
-#endif
 
 #endif /* __CONFIG_H */