powerpc, 8xx: remove support for 8xx

[u-boot] / include / configs / PIP405.h

diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index f6e43c845b4964bbaeacf74d5b274856d8d74cf6..1f5b9f045fb62f65a8c4a2d5123e3bbe382027ae 100644 (file)
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -37,17 +37,11 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_IDE
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_FDC
 #define CONFIG_SCSI
-#define CONFIG_CMD_DATE
 #define CONFIG_CMD_SDRAM
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_BSP
 
 /**************************************************************
  * I2C Stuff:
@@ -81,13 +75,11 @@
  ***************************************************************/
 #define SPD_EEPROM_ADDRESS      0x50
 
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 
 /**************************************************************
  * Environment definitions
  **************************************************************/
-#define CONFIG_BAUDRATE                9600    /* STD Baudrate */
 
 /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
 /* #define CONFIG_BOOT_RETRY_TIME      -10     /XXX* feature is available but not enabled */
@@ -101,7 +93,6 @@
 /***************************************************************
  * defines if an overwrite_console function exists
  *************************************************************/
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
 /***************************************************************
  * defines if the overwrite_console should be stored in the
  * environment
@@ -154,10 +145,8 @@
 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 
-#define CONFIG_PCI                     /* include pci support          */
 #define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_HOST PCI_HOST_FORCE /* configure as pci-host        */
-#define CONFIG_PCI_PNP                 /* pci plug-and-play            */
                                        /* resource configuration       */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000  /* PCI Vendor ID: to-do!!!      */
 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000  /* PCI Device ID: to-do!!!      */
@@ -208,8 +197,6 @@
 /* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
 #define FLASH_SIZE_PRELIM       3  /* maximal flash FLASH size bank #0 */
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 /* Configuration Port location */
 #define CONFIG_PORT_ADDR       0xF4000000
 #define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000
@@ -259,7 +246,6 @@
 #define CONFIG_SYS_ATA_REG_OFFSET      0       /* reg offset */
 #define CONFIG_SYS_ATA_ALT_OFFSET      0x200   /* alternate register offset */
 
-#undef CONFIG_IDE_8xx_DIRECT           /* no pcmcia interface required */
 #undef CONFIG_IDE_LED                  /* no led for ide supported     */
 #define CONFIG_IDE_RESET               /* reset for ide supported...   */
 #define CONFIG_IDE_RESET_ROUTINE       /* with a special reset function */
@@ -290,9 +276,6 @@
 /************************************************************
  * DISK Partition support
  ************************************************************/
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MAC_PARTITION
-#define CONFIG_ISO_PARTITION /* Experimental */
 
 /************************************************************
  * Video support
@@ -304,10 +287,8 @@
  * USB support
  ************************************************************/
 #define CONFIG_USB_UHCI
-#define CONFIG_USB_KEYBOARD
 
 /* Enable needed helper functions */
-#define CONFIG_SYS_STDIO_DEREGISTER            /* needs stdio_deregister */
 
 /************************************************************
  * Debug support