Merge with git://www.denx.de/git/u-boot.git

[u-boot] / include / configs / RBC823.h

diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h
index af6e98b1f0fdc65c12c8c7debbe49bb59c10f7bd..2f6de815514de24f5c89f3553c2b20321e72a45a 100644 (file)
--- a/include/configs/RBC823.h
+++ b/include/configs/RBC823.h
@@ -66,8 +66,8 @@
 #undef CONFIG_BOOTARGS
 #define CONFIG_BOOTCOMMAND                                                     \
        "bootp; "                                                               \
-       "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) "     \
-       "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; "   \
+       "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "     \
+       "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "   \
        "bootm"
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
@@ -79,7 +79,15 @@
 
 #undef CONFIG_CAN_DRIVER               /* CAN Driver support disabled  */
 
-#define CONFIG_BOOTP_MASK      (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
 
 #undef CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -89,45 +97,50 @@
 #define CONFIG_HARD_I2C
 #define CFG_I2C_SPEED 40000
 #define CFG_I2C_SLAVE 0xfe
-#define CFG_I2C_EEPROM_ADDR       0x50
-#define CFG_I2C_EEPROM_ADDR_LEN   1
-#define CFG_EEPROM_WRITE_BITS        4
-#define CFG_EEPROM_WRITE_DELAY_MS   10
-
-#define CONFIG_COMMANDS              ( CFG_CMD_ALL     & \
-                               ~CFG_CMD_PCMCIA & \
-                               ~CFG_CMD_IDE    & \
-                               ~CFG_CMD_PCI    & \
-                               ~CFG_CMD_FDC    & \
-                               ~CFG_CMD_HWFLOW & \
-                               ~CFG_CMD_FDOS   & \
-                               ~CFG_CMD_SCSI   & \
-                               ~CFG_CMD_SETGETDCR      & \
-                               ~CFG_CMD_BSP    & \
-                               ~CFG_CMD_USB    & \
-                               ~CFG_CMD_VFD    & \
-                               ~CFG_CMD_SPI    & \
-                               /* ~CFG_CMD_I2C & */ \
-                               ~CFG_CMD_IRQ    & \
-                               ~CFG_CMD_NAND   & \
-                               ~CFG_CMD_JFFS2  & \
-                               ~CFG_CMD_DTT    & \
-                               ~CFG_CMD_MII    & \
-                               ~CFG_CMD_MMC    & \
-                               /*~CFG_CMD_NET  &*/ \
-                               /*~CFG_CMD_ELF  &*/ \
-                               /* ~CFG_CMD_EEPROM      & */ \
-                               ~CFG_CMD_DATE   )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CFG_I2C_EEPROM_ADDR            0x50
+#define CFG_I2C_EEPROM_ADDR_LEN                1
+#define CFG_EEPROM_WRITE_BITS          4
+#define CFG_EEPROM_WRITE_DELAY_MS      10
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_BSP
+#undef CONFIG_CMD_DATE
+#undef CONFIG_CMD_DISPLAY
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EXT2
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_IRQ
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_MFSL
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SNTP
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_UNIVERSE
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_XIMG
+
 
 /*
  * Miscellaneous configurable options
  */
 #define        CFG_LONGHELP                    /* undef to save memory         */
 #define        CFG_PROMPT      "=> "           /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define        CFG_CBSIZE      1024            /* Console I/O Buffer Size      */
 #else
 #define        CFG_CBSIZE      256             /* Console I/O Buffer Size      */
@@ -203,7 +216,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE     16      /* For all MPC8xx CPUs                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    4       /* log base 2 of the above value        */
 #endif
 
@@ -416,4 +429,22 @@
 #define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 #define BOOTFLAG_WARM  0x02            /* Software reboot                      */
 
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV               "nor0"
+#define CONFIG_JFFS2_PART_SIZE         0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET       0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT         ""
+#define MTDPARTS_DEFAULT       ""
+*/
+
 #endif /* __CONFIG_H */