*/
/* #define DEBUG 1 */
+/* #define DEPLOYMENT 1 */
#undef CONFIG_MPC860
#define CONFIG_MPC823 1 /* This is a MPC823e CPU. */
#undef CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE 9600 /* console default baudrate = 9600bps */
-#ifdef CONFIG_LCD
-#define CONFIG_BOOTDELAY 12 /* autoboot after 12 seconds */
-#else
+#ifdef DEBUG
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#endif
+#else
+#define CONFIG_BOOTDELAY 6 /* autoboot after 6 seconds */
+
+#ifdef DEPLOYMENT
+#define CONFIG_BOOT_RETRY_TIME -1
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 'st')...\n"
+#define CONFIG_AUTOBOOT_STOP_STR "st"
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_RESET_TO_RETRY 1
+#define CONFIG_BOOT_RETRY_MIN 1
+#endif /* DEPLOYMENT */
+#endif /* DEBUG */
+
+/* pre-boot commands */
+#define CONFIG_PREBOOT "setenv stdout serial;setenv stdin serial"
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
- "nfsargs=setenv bootargs console=ttyS0,9600 root=/dev/nfs rw " \
- "nfsroot=$(serverip):$(rootpath)\0" \
- "ramargs=setenv bootargs console=tty0 console=ttyS0,9600 " \
- "root=/dev/ram rw\0" \
- "addip=setenv bootargs $(bootargs) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
- ":$(hostname):$(netdev):off panic=1\0" \
+ "nfsargs=setenv bootargs console=tty0 console=ttyS0,9600 " \
+ "root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs console=tty0 root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
"flash_nfs=run nfsargs addip;" \
- "bootm $(kernel_addr)\0" \
+ "bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip;" \
- "bootm $(kernel_addr) $(ramdisk_addr)\0" \
- "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"gatewayip=172.16.115.254\0" \
"netmask=255.255.255.0\0" \
- "kernel_addr=ff880000\0" \
- "ramdisk_addr=ff980000\0" \
- ""
+ "kernel_addr=ff040000\0" \
+ "ramdisk_addr=ff200000\0" \
+ "ku=era ${kernel_addr} ff1fffff;cp.b 100000 ${kernel_addr} " \
+ "${filesize};md ${kernel_addr};" \
+ "echo kernel updating finished\0" \
+ "uu=protect off 1:0-4;era 1:0-4;cp.b 100000 ff000000 " \
+ "${filesize};md ff000000;" \
+ "echo u-boot updating finished\0" \
+ "eu=protect off 1:6;era 1:6;reset\0" \
+ "lcd=setenv stdout lcd;setenv stdin lcd\0" \
+ "ser=setenv stdout serial;setenv stdin serial\0" \
+ "verify=no"
+
#define CONFIG_BOOTCOMMAND "run flash_self"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+#if 1 /* Enable this stuff could make image enlarge about 25KB. Mask it if you
+ don't want the advanced function */
+
+#ifdef CONFIG_SPLASH_SCREEN
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_BMP | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_PING | \
+ CFG_CMD_ELF | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_DHCP )
+#else
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_PING | \
+ CFG_CMD_ELF | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_DHCP )
+#endif /* CONFIG_SPLASH_SCREEN */
+
+/* test-only */
+#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
+#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */
+
+#define CONFIG_NETCONSOLE
+
+#endif /* 1 */
+
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
+
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#else
#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
#endif
+
#define CFG_MONITOR_BASE 0xFF000000
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
#define CFG_ENV_IS_IN_FLASH
#define CFG_ENV_OFFSET 0x30000 /* Offset of Environment Sector */
#define CFG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */
-#endif
+#endif /* CFG_ENV_IS_IN_NVRAM */
+
+#define CFG_RESET_ADDRESS ((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res)))
/*-----------------------------------------------------------------------
* Cache Configuration
* power management and some other internal clocks
*/
#define SCCR_MASK SCCR_EBDF00
-/* Up to 64MHz system clock, we use 1:2 SYSTEM/BUS ratio */
+/* Up to 48MHz system clock, we use 1:1 SYSTEM/BUS ratio */
+#if defined(RPXlite_64MHz)
#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF01 ) /* %%%SCCR:0x02020000 */
+#else
+#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */
+#endif
/*-----------------------------------------------------------------------
* PCMCIA stuff
#define CONFIG_SERVERIP 172.16.115.6
#define CONFIG_ROOTPATH /workspace/myfilesystem/target/
#define CONFIG_BOOTFILE uImage.rpxusb
+#define CONFIG_HOSTNAME LITE_H1_DW
#endif /* __CONFIG_H */
projects / u-boot / blobdiff