Merge branch 'mpc86xx'

[u-boot] / include / configs / RPXlite_DW.h

diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h
index ea01bc47506953812ceec90bf0308cd4cded2926..31025473f43799793381a33a437f6b2a6316a35f 100644 (file)
--- a/include/configs/RPXlite_DW.h
+++ b/include/configs/RPXlite_DW.h
@@ -45,7 +45,7 @@
  */
 
 /* #define DEBUG       1 */
-/* #ifdef DEPLOYMENT   1 */
+/* #define DEPLOYMENT  1 */
 
 #undef CONFIG_MPC860
 #define CONFIG_MPC823          1       /* This is a MPC823e CPU. */
@@ -61,47 +61,47 @@
 #define CONFIG_BAUDRATE                9600    /* console default baudrate = 9600bps   */
 
 #ifdef DEBUG
-#define CONFIG_BOOTDELAY        -1      /* autoboot disabled            */
+#define CONFIG_BOOTDELAY       -1      /* autoboot disabled            */
 #else
-#define CONFIG_BOOTDELAY        6       /* autoboot after 6 seconds     */
+#define CONFIG_BOOTDELAY       6       /* autoboot after 6 seconds     */
 
 #ifdef DEPLOYMENT
-#define CONFIG_BOOT_RETRY_TIME          -1
+#define CONFIG_BOOT_RETRY_TIME         -1
 #define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT          "autoboot in %d seconds (stop with 'st')...\n"
-#define CONFIG_AUTOBOOT_STOP_STR        "st"
+#define CONFIG_AUTOBOOT_PROMPT         "autoboot in %d seconds (stop with 'st')...\n"
+#define CONFIG_AUTOBOOT_STOP_STR       "st"
 #define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_RESET_TO_RETRY           1
-#define CONFIG_BOOT_RETRY_MIN           1
+#define CONFIG_RESET_TO_RETRY          1
+#define CONFIG_BOOT_RETRY_MIN          1
 #endif /* DEPLOYMENT */
 #endif /* DEBUG */
 
 /* pre-boot commands */
-#define CONFIG_PREBOOT          "setenv stdout serial;setenv stdin serial"
+#define CONFIG_PREBOOT         "setenv stdout serial;setenv stdin serial"
 
 #undef CONFIG_BOOTARGS
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
        "netdev=eth0\0"                                                 \
        "nfsargs=setenv bootargs console=tty0 console=ttyS0,9600 "      \
-               "root=/dev/nfs rw nfsroot=$(serverip):$(rootpath)\0"    \
+               "root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0"    \
        "ramargs=setenv bootargs console=tty0 root=/dev/ram rw\0"       \
-       "addip=setenv bootargs $(bootargs) "                            \
-               "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"      \
-               ":$(hostname):$(netdev):off panic=1\0"                  \
+       "addip=setenv bootargs ${bootargs} "                            \
+               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
+               ":${hostname}:${netdev}:off panic=1\0"                  \
        "flash_nfs=run nfsargs addip;"                                  \
-               "bootm $(kernel_addr)\0"                                \
+               "bootm ${kernel_addr}\0"                                \
        "flash_self=run ramargs addip;"                                 \
-               "bootm $(kernel_addr) $(ramdisk_addr)\0"                \
-       "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"     \
+               "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
+       "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
        "gatewayip=172.16.115.254\0"                                    \
        "netmask=255.255.255.0\0"                                       \
        "kernel_addr=ff040000\0"                                        \
        "ramdisk_addr=ff200000\0"                                       \
-       "ku=era $(kernel_addr) ff1fffff;cp.b 100000 $(kernel_addr) "    \
-               "$(filesize);md $(kernel_addr);"                        \
+       "ku=era ${kernel_addr} ff1fffff;cp.b 100000 ${kernel_addr} "    \
+               "${filesize};md ${kernel_addr};"                        \
                "echo kernel updating finished\0"                       \
        "uu=protect off 1:0-4;era 1:0-4;cp.b 100000 ff000000 "          \
-               "$(filesize);md ff000000;"                              \
+               "${filesize};md ff000000;"                              \
                "echo u-boot updating finished\0"                       \
        "eu=protect off 1:6;era 1:6;reset\0"                            \
        "lcd=setenv stdout lcd;setenv stdin lcd\0"                      \
@@ -117,6 +117,36 @@
 
 #define CONFIG_BOOTP_MASK      (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
 
+#if 1         /* Enable this stuff could make image enlarge about 25KB. Mask it if you
+                 don't want the advanced function */
+
+#ifdef CONFIG_SPLASH_SCREEN
+#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
+                               CFG_CMD_ASKENV  | \
+                               CFG_CMD_BMP     | \
+                               CFG_CMD_JFFS2   | \
+                               CFG_CMD_PING    | \
+                               CFG_CMD_ELF     | \
+                               CFG_CMD_REGINFO | \
+                               CFG_CMD_DHCP    )
+#else
+#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
+                               CFG_CMD_ASKENV  | \
+                               CFG_CMD_JFFS2   | \
+                               CFG_CMD_PING    | \
+                               CFG_CMD_ELF     | \
+                               CFG_CMD_REGINFO | \
+                               CFG_CMD_DHCP    )
+#endif /* CONFIG_SPLASH_SCREEN */
+
+/* test-only */
+#define CFG_JFFS2_FIRST_BANK   0           /* use for JFFS2 */
+#define CFG_JFFS2_NUM_BANKS    1           /* ! second bank contains U-Boot */
+
+#define CONFIG_NETCONSOLE
+
+#endif /* 1 */
+
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
@@ -280,7 +310,7 @@
 #if defined(RPXlite_64MHz)
 #define CFG_SCCR       ( SCCR_TBS | SCCR_EBDF01 )  /* %%%SCCR:0x02020000 */
 #else
-#define CFG_SCCR        ( SCCR_TBS | SCCR_EBDF00 )  /* %%%SCCR:0x02000000 */
+#define CFG_SCCR       ( SCCR_TBS | SCCR_EBDF00 )  /* %%%SCCR:0x02000000 */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -446,5 +476,6 @@
 #define CONFIG_SERVERIP 172.16.115.6
 #define CONFIG_ROOTPATH /workspace/myfilesystem/target/
 #define CONFIG_BOOTFILE uImage.rpxusb
+#define CONFIG_HOSTNAME LITE_H1_DW
 
 #endif /* __CONFIG_H */